Difference between revisions of "Nail Board"

From eLinux.org
Jump to: navigation, search
Line 1: Line 1:
 
[[Image:nail_profile.jpg]]
 
[[Image:nail_profile.jpg]]
 +
 +
The Nail Kit is ideal for taking your Hammer projects on the go with you! You get everything in one small package. That includes the Hammer Board module, on board JTAG, USB slave port for connecting to any Linux PC or Laptop (JTAG, serial console, and Gadget interface), and a USB Host port for plugging one peripheral into. You don't have to worry about carrying a Flywatter JTAG board because the Nail Board has it built in!
  
 
Specs:
 
Specs:
  
* 3 user leds available
+
* 3 User LEDs available
 
** DS2 and DS3 on the Nail Board
 
** DS2 and DS3 on the Nail Board
** USER led on the Hammer Board
+
** User LED on the [[Hammer_Board| Hammer Board]]
 
* 2 interrupt driven pushbuttons
 
* 2 interrupt driven pushbuttons
* PWM buzzer
+
* PWM Buzzer
* reset button
+
* Reset Button
* power led
+
* Power LED
* usb powered
+
* USB powered
* usb serial port console (via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
+
* USBserial port console (via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
* usb jtag interface (via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
+
* USB jtag interface (via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
* usb controlled gpios (4 via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
+
* USB controlled gpios (4 via internal FT2232) see [[Nail_Board_Devices|USB Device Listing]]
* usb gadget interface (via the [[Hammer_Board]]) see [[Nail_Board_Devices|USB Device Listing]]
+
* USB gadget interface (via the [[Hammer_Board]]) see [[Nail_Board_Devices|USB Device Listing]]
 
** Ethernet Gadget Driver (default)
 
** Ethernet Gadget Driver (default)
 
** Serial Port Gadget Driver
 
** Serial Port Gadget Driver
 
** Mass Storage Driver
 
** Mass Storage Driver
* usb host interface (via the [[Hammer_Board]])
+
* USB host interface (via the [[Hammer_Board]])
 
** USB 1.1 Compliant
 
** USB 1.1 Compliant
 
** Low Speed Support (2mb)
 
** Low Speed Support (2mb)
Line 31: Line 33:
 
** GPIOS
 
** GPIOS
 
** External Interrupts
 
** External Interrupts
* [[Hammer_Board]] Breakout Header
+
* [[Hammer_Board| Hammer Board]] Breakout Header
 
** 0.1" headers
 
** 0.1" headers
** all 40 pins available
+
** All 40 pins available
* [[media:nail_schematic.pdf|Schematic]]
+
** Solder Pads available for adding external 20 position pin headers or sockets
 +
[[media:nail_schematic.pdf|Schematic]]
  
 
[[image:nail_block.jpg]]
 
[[image:nail_block.jpg]]
Line 51: Line 54:
 
[[image:case-d.jpg]]
 
[[image:case-d.jpg]]
 
Case with small 96x64 TFT display
 
Case with small 96x64 TFT display
 
 
  
  

Revision as of 01:20, 4 August 2008

Nail profile.jpg

The Nail Kit is ideal for taking your Hammer projects on the go with you! You get everything in one small package. That includes the Hammer Board module, on board JTAG, USB slave port for connecting to any Linux PC or Laptop (JTAG, serial console, and Gadget interface), and a USB Host port for plugging one peripheral into. You don't have to worry about carrying a Flywatter JTAG board because the Nail Board has it built in!

Specs:

  • 3 User LEDs available
  • 2 interrupt driven pushbuttons
  • PWM Buzzer
  • Reset Button
  • Power LED
  • USB powered
  • USBserial port console (via internal FT2232) see USB Device Listing
  • USB jtag interface (via internal FT2232) see USB Device Listing
  • USB controlled gpios (4 via internal FT2232) see USB Device Listing
  • USB gadget interface (via the Hammer_Board) see USB Device Listing
    • Ethernet Gadget Driver (default)
    • Serial Port Gadget Driver
    • Mass Storage Driver
  • USB host interface (via the Hammer_Board)
    • USB 1.1 Compliant
    • Low Speed Support (2mb)
    • Full Speed Support (12mb)
  • 2x10 expansion connector
    • +5v available
    • +3.3v available
    • Headers can be jumper configured
    • 2 wire Serial Port
    • SPI Port
    • I2C
    • GPIOS
    • External Interrupts
  • Hammer Board Breakout Header
    • 0.1" headers
    • All 40 pins available
    • Solder Pads available for adding external 20 position pin headers or sockets

Schematic

Nail block.jpg


Nail-side.jpg

Nail-top.jpg

Case-a.jpg

Case-b.jpg

Case-c.jpg

Case-d.jpg Case with small 96x64 TFT display