Nh5capeSoftware
Contents
Install Ubuntu
Ubuntu 14.04 with kernel 3.15
Download ubuntu 14.04 with kernel 3.15 from http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-kernel-3.15/ubuntu-3.15-020914.img.gz
gunzip ubuntu-3.15-020914.img.gz sudo dd if=./ubuntu-3.15-020914.img of=/dev/sdX; sync
This image comes with preinstalled tslib and SGX libraries.
User: ubuntu
Password: temppwd
tslib
sudo su ts_test
SGX demo
cd /opt/gfxsdkdemos/ogles2/ ./OGLES2ChameleonMan
This image should be booted with pressed BOOT button. If you want to eliminate this - connect BBB as USB slave to PC and wait for boot. When it will recognized as USB disk - enter and rename file MLO to something else. It will enable boot from SD card only.
For graphic interface:
sudo apt-get install lxde
X11 should be changed to 24 bit for correct color display (change default color depth to 24)
sudo nano /etc/X11/xorg.conf
Ubuntu 14.04 with kernel 3.8 (cape manager) and kernel 3.15
Download ubuntu 14.04 from
http://www.cembsoft.com/user/lcdCape/ubuntu-14.04-3.8-3.15/ubuntu-14.04-3.8-3.15-140914.img.gz
It boots with kernel 3.8.13
If you want to change kernel to 3.15 - open file /boot/uEnv.txt
Find the following lines:
#uname_r=3.15.10-bone8 uname_r=3.8.13-bone64.1
Change the kernel by comment (add #) and uncomment (remove #) the desired kernel
Install Android
Android 4.2.2 with kernel 3.2
Download rowboat android image from http://www.cembsoft.com/user/lcdCape/android-3.2/rowboat-android-3.2-030914.img.gz
gunzip rowboat-android-3.2-030914.img.gz sudo dd if=./rowboat-android-3.2-030914.img of=/dev/sdX; sync
Build Ubuntu kernel
Kernel 3.8
Download kernel source
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v3.8 -b tmp wget http://www.cembsoft.com/user/lcdCape/patches/nh5cape_3.8.patch wget http://www.cembsoft.com/user/lcdCape/patches/nh5cape_touchscreen.patch patch -p1 < nh5cape_touchscreen.patch patch -p1 < nh5cape_3.8.patch
For the first time run
./build_kernel.sh
For the next times
tools/rebuild.sh
When it asks for kernel configuration - navigate to drivers - input - touchscreen and enable ft5x0x_ts driver