OSK Mistral wakeup button mod

From eLinux.org
Revision as of 20:36, 1 February 2008 by Apaulsen (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Mistral board has the wakeup button (SW1) wired to the LCD 3.3V rail, which is powered down during suspend. To allow this button to wake up the omap, it must be rewired to the main 3.3V rail.

Osk mistral wakeup top.jpg

  1. Rotate R10 (the resistor directly behind SW1) so it is only connected to the pad near TP23
  2. Solder a thin wire to the floating end of R10 and drop it through the slot for the LCD cable
  3. Solder the other end of the wire to the 3.3V rail (pin #10 on connector J5)

Osk mistral wakeup bottom.jpg