OpenOCD

From eLinux.org
Revision as of 23:41, 29 March 2012 by Wmat (Talk | contribs)

Jump to: navigation, search

This page builds on content from the main OpenOCD project site.

OpenOCD (Open On-Chip Debugger) is open-source software that interfaces with a hardware debugger's JTAG port. OpenOCD provides debugging and in-system programming for embedded target devices. OpenOCD provides the ability to flash NAND and NOR FLASH memory devices that are attached to the processor on the target system. Flash programming is supported for external CFI compatible flashes (Intel and AMD/Spansion command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3 and STM32x).


OpenOCD supports the following cores:

CORE TYPE EXAMPLE PROCESSORS
ARM7TDMI LPC2148, AT91SAM7
ARM720T LH79520, EP7312
ARM9TDMI
ARM920T S3C2410, S3C2440
ARM922T
ARM926EJS S3C2412, STN8811, STN8815
ARM966E STR91XF
ARM11 S3C6400, OMAP2420, MSM7200
ARM1136
ARM1156
ARM1176
CORTEX-M3 LM3S series, STM32 series
CORTEX-A8 OMAP3530 BeagleBoard
CORTEX-A8 DM3730 BeagleBoard-xM
CORTEX-A9 OMAP4430 PandaBoard
XSCALE PXA255, PXA270, IXP42X
MARVEL FEROCEON CPU CORE
MIPS M4K


OpenOCD was originally developed by Dominic Rath at the University of Applied Sciences Augsburg. The OpenOCD source code is now available through the GNU General Public License (GPL).

Installing OpenOCD

Compiling OpenOCD

OpenOCD Ubuntu Package

OpenOCD Patches

OpenOCD Config Files


Running OpenOCD

Running OpenOCD on Linux

Running OpenOCD on Windows

OpenOCD Troubleshooting


External Links

[OpenOCD] project.

[OpenOCD source]