- 1 Introduction
- 2 Android
- 3 WinCE
OpenSourceMID.org is founded by a group of engineers enthusiastic in modern technologies and open source software development and sponsored by Timll Technic Inc. in China. It is an open community to provide support and discussions for K7 MID or any other open source MID projects through this website.
OpenSourceMID.org, itself, is an Open Source project. This means, first, that we offer not only a product but a process, and second, that we depend upon the contributions of developers and endusers to make that process happen. The easiest way for you to help us out is to join the overall OpenSourceMID.org project by join OpenSourceMID Community.
K7 MID is a low-cost, high-performance handheld Mobile Internet Device featuring Texas Instruments' OMAP3530 ARM Cortex-A8 core processor with, wireless connectivity, touch screen control, GPS navigation systems and integrated power management with battery backup. It can support for both Android and WinCE operating systems and would be a complete solution that addresses all of the user's multimedia and communication needs on a single platform.
|2||MCP||256MB NAND Flash + 256MB SDRAM|
|5||USB3320||High Speed USB Transceiver||File:USB3320-datasheet.pdf|
|6||FE1.1||USB 2.0 High Speed 4-Port Hub Controller||File:FE11-datasheet.pdf|
|7||APW7093||Step Down DC/DC Regulator||File:APW7093-datasheet.pdf|
|8||TPS61032||Synchronous Boost Converter||File:TPS61032-datasheet.pdf|
|9||BQ24070||Single-Chip Charge and System Power-Path Management IC||File:BQ24070-datasheet.pdf|
|10||MMA8450Q||3-Axis, 8-bit/12-bit Digital Accelerometer||File:MMA8450Q.pdf|
|11||74ALVC164245||16-bit Dual Supply Translating Transciever||File:74ALVC164245-datasheet.pdf|
|13||TSC2046||Touch Screen Controller||File:TSC2046-datasheet.pdf|
|14||LM4890||1 Watt Audio Power Amplifier||File:LM4890-datasheet.pdf|
Optional module - E380
E380 is a Mini PCI-E 3G wireless communication card based on EV-DO Rev.A standard，it is applicable to CDMA 2000 1x and EVDO network，it supports CDMA 800MHz and 1900MHz frequency band，it can achieve global roaming.
Working voltage: 3.3 - 3.8V DC
Dual-antenna interface, support diversity antenna
Support CDMA 2000 1x ，EV-DO Rev.0，EV-DO Rev.A
Support CDMA 800/S1900 MHz
Support OS: WinCE，Android
Maximum output power: (Class III) BAND CLASS 0 (800/1900MHz)：+23dBm
Minimum controlled output power: <-50dBm
Sensitivity: <-104dBm (FER≤0.5％)
Spurious maximum output power: 900kHz: <-42dBc/30kHz 1.98MHz: <-54dBc/30kHz
Support high-speed data services
CDMA 1x UL：153.6kbit/s(Peak) DL：153.6kbit/s(Peak)
EVDO Rev.0 UL：153.6kbit/s(Peak) DL：2.4Mbit/s(Peak)
EVDO Rev.A UL：1.8Mbit/s(Peak) DL：3.1Mbit/s(Peak)
Support the China Telecom standard AT command set
Support the connection speed and traffic statistics
Support OTA function
Support 8K EVRC Voice Code
Embedded 3G wireless communication protocol stack
Optional module - W338
W338 is a HSDPA Internet card using USB interface. Its driver is installed automatically. It can also work as a Micro-SD card reader which supports up to 8GB.
Chipset: Qualcomm MSM6280
Support OS: Windows 2000, Windows XP, Windows Vista, Windows 7, WinCE, Linux2.6, Android
3G frequency band: UMTS 2100MHz
2G frequency band: GSM/GPRS/EDGE 850/900/1800/1900 MHz
Internet surfing, message, phonebook
Support Micro-SD card(up to 8GB)、USIM card management
USB 2.0 high-speed transmission, driver installed automatically
Single color LED can display a variety of state: real-time network state, working mode, error warning.
Working temperature: -20~60℃
Storage temperature: -30~85℃
Shake: 15g(Peak), 10~500Hz
How to update the Android
1.You can download the system image files from OpensourceMID.
2.You should insert the TF card before K7 is turned on.
3.Connect the 5V power supply, press the Power key and Down key, the LCD will display the interface below:
Press the enter key to select the "update system", the system updating will start.
4.Select the "exit", the system will reboot.
How to compile the Android source
How to use the OTG port as the UART debug port
1. Download the USB driver for Windows "Littleton USB Driver for Windows.rar" and extract it.
2. Connect K7 to your computer's USB port. Windows will detect the device and launch the Found New Hardware wizard. Vista/7 users need to cancel the automatic driver update.
3. Select "Locate and install driver software."
4. Select "Browse my computer for driver software."
5. Click "Browse..." and locate the folder where you extracted the driver. As long as you specified the exact location of the installation package, you may leave "Include subfolders" checked or unchecked—it doesn't matter.
6. Click "Next." Vista/7 may prompt you to confirm the privilege elevation required for driver installation. Confirm it. The driver will be installed.
7. Download the Android SDK for Windows "android-sdk_r07-windows.zip" and extract it.
8. Run the cmd in Windows.
9. Enter the commands below:
Now the OTG port is working as the UART debug port. You can install applications from computer. Enter the command below:
adb.exe install D:\AdobeReaderv10.0.0.apk
How to use Wi-Fi
Proceed as follows: Settings-->Wireless & networks-->Wi-Fi settings, first tick the “Wi-Fi” to turn on Wi-Fi, it will scan networks automatically. Then you can choose one of the Wi-Fi networks to connect, when it shows “Connected” under the network you chose, you are able to access to the Wi-Fi. The logo will be on the top of screen, the number of bright stripes represents the signal strength.
How to use 3G
First you need a CDMA module inside your K7 and a 3G SIM card in the slot, or a WCDMA module connected with your K7 and a 3G SIM card in your module. Then proceed as follows: Settings-->Wireless & networks-->Mobile networks settings-->Access Point Names, then press the menu button and choose “New APN”, set the Name and APN with a same word, press menu button again and choose “Save”. When the 3G logo appear on the top of screen, you are able to access to the 3G network.
How to use GPS
First you should proceed as follows: SettingsLocation & security, tick the “Use GPS satellites”, then you can run GPS applications to search satellites and locate.