Difference between revisions of "Panda How to kernel 2 6 39"

From eLinux.org
Jump to: navigation, search
Line 36: Line 36:
 
  make ARCH=arm CROSS_COMPILE=Path_to_your/arm-2009q3/bin/arm-none-linux-gnueabi- uImage
 
  make ARCH=arm CROSS_COMPILE=Path_to_your/arm-2009q3/bin/arm-none-linux-gnueabi- uImage
  
After booting run fbtest to see a nice test pattern.
+
After booting run fbtest to see a nice test pattern from the dvi port.
  
 
[[File:fbtest.jpg|240px]]
 
[[File:fbtest.jpg|240px]]
  
 
More to come "real soon now"(tm)
 
More to come "real soon now"(tm)

Revision as of 23:05, 30 March 2011

The merge window has closed and 2.6.39-rc1 has been released, There are many Pandaboard related changes, including HDMI, DVI and wl21xx support.

As of -rc1:
* hdmi & dvi are broken due to some dss clocking issues, see: https://patchwork.kernel.org/patch/674062/ for details, a fix for dvi is available, see below.
* abe sound is not supported.
* Dave Anders patch to not configure the unused power regulators of VUSIM and VAUX1 is included.
* wl12xx support is working to the extent that one can associate with an access point, get an IP address and ping out to the internet.

The proper firmware for wl12xx support is available from: git://git.kernel.org/pub/scm/linux/kernel/git/romieu/linux-firmware.git, just clone that repository and copy the ti-connectivity directory to /lib/firmare/.

# pwd
/lib/firmware/ti-connectivity
# ls -la
total 796
drwxr-xr-x    2 default  default       1024 Mar 29  2011 .
drwxr-xr-x    4 root     root          1024 Mar 29  2011 ..
-rw-r--r--    1 default  default     273040 Mar 29  2011 wl1271-fw-2.bin
-rw-r--r--    1 default  default     262356 Mar 29  2011 wl1271-fw-ap.bin
-rw-r--r--    1 default  default     271832 Mar 29  2011 wl1271-fw.bin
-rw-r--r--    1 default  default        912 Mar 29  2011 wl1271-nvs.bin

Building 2.6.39-rc1 is basically the same as How to build 2.6.38 kernel, but of course you need the rc1 sources. The omap2plus_defconfig works, but does not enable anything interesting. config.2.6.39-rc1 enables USB, its' ethernet adapter, and wl12xx support. config.2.6.39-rc1.2 enables USB, it's ethernet adapter, wl12xx support, and dvi support. However using that config requires that the kernel sources be patched with 0001-omap4-pandaboard-fix-dvi-support.patch The patch also provices panda_dvi_defconfig which just enables dvi.

Apply it like so: (from inside the kernel sources directory)

patch -p1 < 0001-omap4-pandaboard-fix-dvi-support.patch

Then use either of the above configs or

make ARCH=arm omap2plus_defconfig
        or
make ARCH=arm panda_dvi_defconfig

Then compile with

make ARCH=arm CROSS_COMPILE=Path_to_your/arm-2009q3/bin/arm-none-linux-gnueabi- uImage

After booting run fbtest to see a nice test pattern from the dvi port.

Fbtest.jpg

More to come "real soon now"(tm)