Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Panda How to kernel 2 6 39

From eLinux.org
Revision as of 17:21, 30 April 2011 by KenMcGuire (Talk | contribs)

Jump to: navigation, search

The merge window has closed and 2.6.39-rc1 has been released, There are many Pandaboard related changes, including HDMI, DVI and wl21xx support.

As of -rc1:
* hdmi & dvi are broken due to some dss clocking issues, see: https://patchwork.kernel.org/patch/674062/ for details, a fix for dvi is available, see below.
* abe sound is not supported.
* Dave Anders patch to not configure the unused power regulators of VUSIM and VAUX1 is included.
* wl12xx support is working to the extent that one can associate with an access point, get an IP address and ping out to the internet.
As of -rc2
* Neither OMAP nor PandaBoaqrd changes, no other changes to wlan, dvi or hdmi code, so stay tuned for rc-3 in about a week or so. 
** looks like lots of interesting changes queued up for the next -rc so stay tuned..
As of -rc3
* Rebooting is broken (there was a post suggesting that it was broken in -rc2 as well) follow
this thread for more info: http://www.spinics.net/lists/linux-omap/msg49746.html.
** a simple fix is to turn off OMAP2 support, which is done in the .config below for -rc3.
* What at first looked like interesting changes to /arch/arm/mach-omap2/ /drivers/net/wireless/wl12xx/ /drivers/video/omap2/dss/ 
seemed to really be typo fixes in comments, Hopefully, some real fixes will be in -rc3.
* New in -rc3 is that the usb ethernet adapter appears as eth0 rather than usb0.
As of -rc4
* Neither OMAP nor PandaBoaqrd changes, no other changes to wlan, dvi or hdmi code, so stay tuned for rc-5 in about a week or so. 
As of -rc5
* Neither OMAP nor PandaBoaqrd changes, no other changes to wlan, dvi or hdmi code,
* There have been lots of changes in other parts of the kernel, so it's time to see if anything in -rc5 breaks pandaboard.
* Rebooting is still broken, so beware of using omap2plus_defconfig without changes. (see -rc3 above)
* patching is still neccessary to get dvi working
* wlan and ethernet both seem to work as in -rc3
** There are several omap44xx changes queued up for -rc6

The proper firmware for wl12xx support is available from: git://git.kernel.org/pub/scm/linux/kernel/git/romieu/linux-firmware.git, just clone that repository and copy the ti-connectivity directory to /lib/firmare/.

# pwd
/lib/firmware/ti-connectivity
# ls -la
total 796
drwxr-xr-x    2 default  default       1024 Mar 29  2011 .
drwxr-xr-x    4 root     root          1024 Mar 29  2011 ..
-rw-r--r--    1 default  default     273040 Mar 29  2011 wl1271-fw-2.bin
-rw-r--r--    1 default  default     262356 Mar 29  2011 wl1271-fw-ap.bin
-rw-r--r--    1 default  default     271832 Mar 29  2011 wl1271-fw.bin
-rw-r--r--    1 default  default        912 Mar 29  2011 wl1271-nvs.bin

Building 2.6.39-rc1, -rc3, or -rc5 is basically the same as How to build 2.6.38 kernel, but of course you need the rc1/3/5 sources. The omap2plus_defconfig works, but does not enable anything interesting. config.2.6.39-rc1 enables USB, its' ethernet adapter, and wl12xx support. Or config.2.6.39-rc3.1 for -rc3. config.2.6.39-rc1.2 enables USB, it's ethernet adapter, wl12xx support, and dvi support, for -rc3 use config.2.6.39-rc3.3 and config.2.6.39-rc5.1 for -rc5. However using either of those configs requires that the kernel sources be patched with 0001-omap4-pandaboard-fix-dvi-support.patch The patch also provices panda_dvi_defconfig which just enables dvi. This patch applies to both -rc1, -rc3 and -rc5.


Apply it like so: (from inside the kernel sources directory)

patch -p1 < 0001-omap4-pandaboard-fix-dvi-support.patch

Then use either of the above configs or

make ARCH=arm omap2plus_defconfig
        or
make ARCH=arm panda_dvi_defconfig

Then compile with

make ARCH=arm CROSS_COMPILE=Path_to_your/arm-2009q3/bin/arm-none-linux-gnueabi- uImage
     or
make ARCH=arm CROSS_COMPILE=Path_to_your/arm-2010q1/bin/arm-none-linux-gnueabi- uImage


After booting run fbtest to see a nice test pattern from the dvi port.

Fbtest.jpg


Ever since 2.6.38, the i2c character device driver support from user space has been broken for OMAP44xx.
* A fix has been submitted for the linux-omap-2.6 branch, but it may be a while till it gets into an -rcx.
See http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=39fe1a6fafe1e85c183379af9f3ceda7cd24bd65 for the commit.
* A quick fix for this issue is available File:Omap44xx-i2c-fix.patch

Apply it like so: (from inside the kernel sources directory)

patch -p1 < Omap44xx-i2c-fix.patch

Then compile as above.

Then you can run i2cdetect and the results should look like this:

# i2cdetect -y -r 1
    0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- UU UU UU UU -- -- -- -- 
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --

More to come "real soon now"(tm)