Parallella VerifiedPeripherals

From eLinux.org
Revision as of 16:43, 31 May 2014 by Jan Kok (Talk | contribs) (Added configuration comment and Belkin N300 entry)

Jump to: navigation, search
Attention niels epting.svg Important Notices

Using non-standards compliant powered USB hubs may damage the Parallella!
Check the list of all certified USB hubs before plugging in your USB hub.


Using a power adapter supplying more than 5V may damage the Parallella

Guidance

  1. Where additional information may prove useful, please include this, e.g. requires a powered USB hub, only works with Kernel vN etc.
  2. Where a peripheral has proven to be problematic, please add a sub-section for problem hardware if it doesn't already exist and note down a few details there.
  3. If you'd like to notify others you can also post details to the forum topic.

Power supplies

Voltage: 5 Volts
Current: 2 Amps / 2000 mA (minimum)
Connector Type: Barrel
Barrel Size: 5mm with a 2.1mm center
Polarity: Center-positive

Micro SD

Powered hubs

Keyboards

Mice and Pointing devices

Wifi

Requires some software configuration. See How to get WiFi working?

  • Belkin N300 High-Performance Wi-Fi USB Adapter

Bluetooth

Cellular (GSM/GPRS/3G/4G)

Ethernet

Sound cards

Webcams

Video/frame grabbers

GPS

Serial

Unsuitable

  • Anything using the RS-232 or RS-423 standards, as these have larger and negative voltages.
  • PC serial port or replacement adapter. These can often be identified by a 9-pin D shaped socket.
  • Directly connecting to USB or Ethernet. An adapter is needed!

Parallel adapters

IDE/SATA adapters

HDMI

Ethernet