PixterMultimediaJTAG

From eLinux.org
Revision as of 03:59, 1 March 2007 by Wmat (Talk | contribs) (Legacy Content Conversion)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

JTAG Pins:

  • D2 nTRST I JTAG Test Reset Input
  • P4 TMS I JTAG Test Mode Select Input
  • T3 TCK I JTAG Test Clock Input
  • T1 TDI I JTAG Test Serial Data Input
  • P3 TDO O JTAG Test Data Serial Output
  • TEST1 ARM ICE debug mode
  • to place the LH79524 into ARM ICE debug mode you will need to connect test1 via a 4.7K Ohm resistor to ground

Pixter-mm-jtag.jpg