R-Pi NAS

From eLinux.org
Revision as of 14:43, 30 May 2012 by Bredman (talk | contribs) (Configuring the Samba client on an Android smartphone)
Jump to: navigation, search

Back to RPi Guides.


Raspberry Pi Network Attached Storage


What does it do?

This project configures your Raspberry Pi to share files with any other computer on your local network. You can add a large hard disk to the RPi and use this to store your important files/photos/videos in a central location.

The files on your RPi can be easily accessed from any type of computer which is connected to your network, for example a Windows PC, a Linux PC, A Mac, a smartphone, etc. In a classroom, each student can have access to a private area, and also a public area for sharing files.

Warning: Make sure that you store your important files in more than one location. If the hard disk connected to the RPi becomes faulty, you may not be able to access your files.

Note: There are two major classes of Network Attached Storage

  1. Low-power NAS. This is used as a safe or convenient place to store files for very occasional access. The priority is on low cost and low energy usage. This guide is suitable for this type of NAS.
  2. High-power NAS. This is used to provide instant access to files or to stream HD video. The priority is speed. This guide is NOT suitable for this type of NAS.

What do you need?

  • A Raspberry Pi, model B.
  • A boot SD card for the Raspberry Pi.
  • A large USB-connected hard drive.
  • An Ethernet cable to connect to the local network.

What skill level is required?

This project does not require any coding or compilation. Very basic Linux and networking knowledge would be useful, but not essential.

You need to...

  • Edit configuration files on the RPi
  • Enter basic Linux commands to configure users and passwords
  • Use standard software tools (Windows/Linux/Mac) to add a network drive to your PC
  • Connect computers using ethernet cables

How does it work?

The RPi is configured as a Samba server and can expose its files to any Samba client. Samba was originally a Windows-only protocol named Server Message Block (SMB), but has become popular for other operating systems.

There are other methods possible (for example ftp) but Samba is very popular because it is built into Windows and Mac OS X, and is very easy to install in all versions of Linux.

The end effect is that the PC user will be able to read and write to a new drive which appears to be locally-attached but is actually attached to the RPi.

Note that Samba is is very easy to use but is not suitable for high performance. You may not be able to access high-definition video quickly enough using Samba.

Overview of this project

This project includes instructions to configure the Samba server (where the files are stored centrally) and the Samba client (the user's computer). You must follow the instructions for one of the following servers and at least one of the following clients.

  1. Configure a Samba server on Debian RPi
  2. Configuring the Samba client on a Windows PC
  3. Configuring the Samba client on a Linux PC
  4. Configuring the Samba client on a Mac
  5. Configuring the Samba client on an Android smartphone

Configure a Samba server on Debian RPi

Before you start

To follow the instructions below, you must enter commands into a terminal. You must open a terminal before starting the instructions below. If necessary, search the internet for instructions by using search terms like "open terminal Gnome" or "open terminal LXDE" etc depending on your chosen desktop environment.

You may find it useful to open a web browser on the RPi so you can copy commands from this web page and paste them into the terminal. This saves a lot of work and errors. Most terminal programs allow you to paste by using a menu selections "Edit" then "Paste".

If you do not understand a command, do not paste it in blindly. You can learn more about commands by reading the manual, by using the "man" command. For example, to find out more about the mkdir command, give the command "man mkdir". Press "q" to exit the man program.

A lot of commands start with "sudo". The sudo prefix allows a normal user to enter commands which will affect all other users of the system.

Connect the RPi to a network

Check that you have an internet connection.

Command:

ping www.google.com

Expect something like

64 bytes from a.b.c.d: icmp_seq=n ttl=n time=n
64 bytes from a.b.c.d: icmp_seq=n ttl=n time=n
64 bytes from a.b.c.d: icmp_seq=n ttl=n time=n

where a, b, c d and n are replaced by numbers.

Press Control-C to stop the ping program

If you do not see the above response, you do not have an internet connection, so this must be fixed before you can continue.

Install the samba software

Command:

sudo apt-get install samba

Expect:

Do you want to continue? [Y/n]

Answer by pressing "y", then the [enter] key.

Make a copy of your samba configuration file, just in case something goes wrong with later instructions.

Command:

sudo cp /etc/samba/smb.conf /etc/samba/smb.conf.old

Enable security on the Samba server on the RPi

Note: This section is optional, but highly recommended. It forces the samba server to ask for a username and password before allowing another computer to connect.

Edit the samba configuration file

sudo nano /etc/samba/smb.conf

Search for the section marked ##### Authentication #####

Change the text

#  security = user

to

   security = user

Note that you must use the arrow keys to move around in the nano editor, you cannot use the mouse.

Save the edited file

Press Control-X
Press y
Press [enter]

Restart samba to use the new configuration file.

sudo /etc/init.d/samba restart

Expect:

Stopping Samba daemons: nmdb smdb
Starting Samba daemons: nmdb smdb

Configure private storage areas on the RPi

Configure samba to allow each user to access his home directory.

Open the smb.conf file in nano

sudo nano /etc/samba/smb.conf

Search for the section starting [homes]

In the [homes] section, change from

  read only = yes

to

  read only = no

Save the edited file

Press Control-X
Press y
Press [enter]

Restart samba to use the new configuration file.

sudo /etc/init.d/samba restart

Expect:

Stopping Samba daemons: nmdb smdb
Starting Samba daemons: nmdb smdb

By default, the username pi is defined. If you want to use another username for Samba, add a new user

sudo useradd john -m -G users
sudo passwd john

You will be asked to enter the new password twice.

Allow this user to be a samba user

sudo smbpasswd -a john

You will be asked to enter the new password twice.

Configure a public storage area on the RPi

If you have more than one user, you may wish to define a public area where everybody can share files. This section is optional.

Create a directory to store public files

sudo mkdir /home/shares
sudo mkdir /home/shares/public
sudo chown -R root:users /home/shares/public
sudo chmod -R ug+rwx,o+rx-w /home/shares/public

Edit the samba configuration file

sudo nano /etc/samba/smb.conf

At the end of the file, add the following lines

[public]
  comment = Public Storage
  path = /home/shares/public
  valid users = @users
  force group = users
  create mask = 0660
  directory mask = 0771
  read only = no

Save the edited file

Press Control-X
Press y
Press [enter]

Restart samba to use the new configuration file.

sudo /etc/init.d/samba restart

Expect:

Stopping Samba daemons: nmdb smdb
Starting Samba daemons: nmdb smdb

Configuring the Samba client on a Windows PC

A Windows PC uses Samba automatically, no extra software is required.

In Windows, Network Attached Storage is known as a "network drive". Open up the Windows help and search for the term "network drive", you should see something like

RPI NAS Win1.JPG

If you follow the instructions, you will be asked to select a drive letter (Z: is default but you can select anything available) and the path to the network drive. (The following screen may be slightly different depending on your version of Windows)

RPI NAS Win2.JPG

Enter the path to the RPi and click on "Finish". The path is in the format \\computer_name\directory. In this example, the computer name is "bigdisk" and the user wishes to attach to the directory "john". Note that you may also enter the computer name in IP address format, such as "192.168.0.2".

If you enabled security on the RPi server, you will be asked for a username and a password.

RPI NAS Win3.JPG

This must be a valid username and password on the RPi server. To access a public area, any username is acceptable. To access a private area, the username must match the last part of the folder path (the part after the \ character).

Note that a Windows user can attach to multiple network drives at the same time. It is quite common for a user to attach to his private files (commonly drive H: is used to represent a home directory) and also attach to a public storage (commonly drive P: is used to represent a public drive).

Configuring the Samba client on a Linux PC

Not started yet.

Basic plan is to use the standard Linux package smbclient

Configuring the Samba client on a Mac

As with most OS X stuff the "it just works" fits this one. As long as; the Linux and Mac networking is setup right with both boxes on the same network and the "Finder Preferences" on the Mac is set to show "Connected Servers". When you open the "Finder" on the Mac the R-Pi's host name will show in the right of the finder window under the heading "SHARED". When you click on the name for the first time a message at the top of "Finder" window will show on the right "Connection Failed" with a button on the left marked "Connect as" press the button and the Mac will ask for "User name" and "Password" use the one set in the "SAMBA" setup and the shared discs will appear in the "Finder".

Configuring the Samba client on an Android smartphone

There are multiple Samba clients for Android. The following shows only one example called File Expert, but you can search for the text "smb" in the Android Market (Google Play) to find other apps.

Install the app "File Expert".

Open the app "File Expert"

Press the "+" on the top right.

Click on "Network"

Click on "Windows/Samba sharing"

Click on "Create new account"

Leave server domain empty

Set computer name to "raspberrypi"

Set nickname to "john"

Set username to "john"

Set password to the password for John's account

Click on "Okay"

Click on the server named "pi" in the "File Sharing Servers" list.