Difference between revisions of "RPI vcgencmd usage"

From eLinux.org
Jump to: navigation, search
(3 intermediate revisions by 3 users not shown)
Line 28: Line 28:
  
  
 +
vcgencmd version
 +
 +
Shows the firmware version
  
  
 
Parameters and function of other commands are not known.
 
Parameters and function of other commands are not known.
 +
Current (version 346337) output of '''vcgencmd commands''':
 +
 +
vcos, ap_output_control, ap_output_post_processing, pm_set_policy, pm_get_status, pm_show_stats, pm_start_logging, pm_stop_logging, version, commands, set_vll_dir, led_control, set_backlight, set_logging, get_lcd_info, set_bus_arbiter_mode, cache_flush, otp_dump, codec_enabled, measure_clock, measure_volts, measure_temp, get_config, hdmi_ntsc_freqs, render_bar, disk_notify, inuse_notify, sus_suspend, sus_status, sus_is_enabled, sus_stop_test_thread, egl_platform_switch, mem_validate, mem_oom, mem_reloc_stats, file, vctest_memmap, vctest_start, vctest_stop, vctest_set, vctest_get

Revision as of 01:53, 21 December 2012

/opt/vc/bin/vcgencmd commands

Shows a list of possible (needs verification) commands.


Verified commands:


vcgencmd measure_clock <clock>

Shows clock frequency, clock can be one of arm, core, h264, isp, v3d, uart, pwm, emmc, pixel, vec, hdmi, dpi.


vcgencmd measure_volts <id>

Shows voltage, id can be one core, sdram_c, sdram_i, sdram_p, and defaults to core if not specified.


vcgencmd measure_temp

Shows core temperature of BCM2835 SoC.


vcgencmd codec_enabled <codec>

Shows if the specified codec is enabled, codec can be one of H264 MPG2 WVC1


vcgencmd version

Shows the firmware version


Parameters and function of other commands are not known. Current (version 346337) output of vcgencmd commands:

vcos, ap_output_control, ap_output_post_processing, pm_set_policy, pm_get_status, pm_show_stats, pm_start_logging, pm_stop_logging, version, commands, set_vll_dir, led_control, set_backlight, set_logging, get_lcd_info, set_bus_arbiter_mode, cache_flush, otp_dump, codec_enabled, measure_clock, measure_volts, measure_temp, get_config, hdmi_ntsc_freqs, render_bar, disk_notify, inuse_notify, sus_suspend, sus_status, sus_is_enabled, sus_stop_test_thread, egl_platform_switch, mem_validate, mem_oom, mem_reloc_stats, file, vctest_memmap, vctest_start, vctest_stop, vctest_set, vctest_get