Difference between revisions of "RPi Debian Auto Login"
(→Auto StartX (Run LXDE)) |
m (→Change "Debian Squeeze" to "Debian") |
||
(2 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | This guide will show you how to login to Debian | + | This guide will show you how to login to a Debian image and start LXDE by simply powering the Pi on. |
==Auto Login:== | ==Auto Login:== | ||
Line 19: | Line 19: | ||
sudo nano /etc/rc.local | sudo nano /etc/rc.local | ||
− | Scroll to the bottom and add: | + | Scroll to the bottom and add the following above exit 0: |
− | su pi -c startx | + | su -l pi -c startx |
(where <code>pi</code> is the username you want to run X as). Press <code>Ctrl+X</code> to exit, <code>Y</code> to save followed by <code>Enter</code> twice. | (where <code>pi</code> is the username you want to run X as). Press <code>Ctrl+X</code> to exit, <code>Y</code> to save followed by <code>Enter</code> twice. |
Latest revision as of 14:19, 24 February 2013
This guide will show you how to login to a Debian image and start LXDE by simply powering the Pi on.
Auto Login:
In Terminal:
sudo nano /etc/inittab
Scroll down to:
1:2345:respawn:/sbin/getty 115200 tty1
and change to
#1:2345:respawn:/sbin/getty 115200 tty1
Under that line add:
1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1
Ctrl+X to exit, Y to save followed by enter twice
Auto StartX (Run LXDE)
In Terminal:
sudo nano /etc/rc.local
Scroll to the bottom and add the following above exit 0:
su -l pi -c startx
(where pi
is the username you want to run X as). Press Ctrl+X
to exit, Y
to save followed by Enter
twice.
(Note: The previous method indicated that you should add startx
to /etc/profile
. The updated method is better, since it will cause startx
to run only when necessary, and it will not launch the X server as root.)
|