Difference between revisions of "RPi Expansion Boards by Manufacturer"
Snail-tony (talk | contribs) |
Snail-tony (talk | contribs) |
||
Line 156: | Line 156: | ||
==== RPi "UserPort" ==== | ==== RPi "UserPort" ==== | ||
[http://zuzebox.wordpress.com/2012/03/14/userport-for-raspberry-pi-v0-10/ RPi UserPort] is a digital and analogue I/O board for the Raspberry Pi. UserPort replicates the original BBC Micros digital User Port and Analogue Port but uses more modern components such as the MCP23S17 16-ch GPIO and MCP3204 4-ch 12-bit ADC. | [http://zuzebox.wordpress.com/2012/03/14/userport-for-raspberry-pi-v0-10/ RPi UserPort] is a digital and analogue I/O board for the Raspberry Pi. UserPort replicates the original BBC Micros digital User Port and Analogue Port but uses more modern components such as the MCP23S17 16-ch GPIO and MCP3204 4-ch 12-bit ADC. | ||
− | |||
− | |||
===Pridopia === | ===Pridopia === | ||
Line 428: | Line 426: | ||
− | + | ==References== | |
+ | <references/> | ||
{{Template:Raspberry Pi}} | {{Template:Raspberry Pi}} |
Revision as of 16:43, 16 November 2013
Contents
- 1 dresden elektronik
- 2 AB Electronics
- 3 Advamation
- 4 Pi Supply - Pi Cocktails
- 5 MyPiShop
- 6 electronics.cat
- 7 MSL Digital Soulutions
- 8 DTronixs
- 9 Pridopia
- 9.1 Rs-Pi 4 USB hub & multi-function I2C AD/DA RTC RS232 board
- 9.2 Rs-Pi 4 USB hub with I2C 23017x2 32 GPIO board
- 9.3 Rs-Pi 4 USB hub with SPI 23s17x2 32 GPIO board
- 9.4 Rs-Pi 7 USB hub with multi-function I2C AD/DA board
- 9.5 Rs-Pi 7 USB hub with I2C 23017x1 16 GPIO board
- 9.6 Rs-Pi 7 USB hub with SPI 23s17x1 16 GPIO board
- 9.7 Rs-Pi I2C 23017 x2 (or SPI 23s17 x2) 32 GPIO with uln2803 x2 board
- 9.8 Rs-Pi I2C 23017 -2 or SPI 23s17 -2 - 32 GPIO Board
- 9.9 Rs-Pi I2C 23017 -4 or SPI 23s17 -4 - 64 GPIO Board
- 9.10 Rs-Pi I2C 23017 -8 or SPI 23s17 -8 - 128 GPIO Board
- 9.11 Rs-Pi I2C 32 Channel PWM /Servo Board
- 9.12 Rs-Pi I2C 16 Channel PWM /Servo & I2C 23017 (or SPI 23s17) 16 GPIO Board
- 9.13 Rs-Pi I2C 24x16 LED Matrix Board
- 9.14 Rs-Pi I2C 16x16 LED Matrix Board
- 9.15 Rs-Pi ULN2803 & SPI AD/DA & I2C 1-Wire - special for rs-pi v2-p5
- 9.16 Rs-Pi ULN2803 8bit 2 Relay Board + 2 Step Motor Port
- 9.17 Rs-Pi ULN2803 & SPI AD/DA Board
- 9.18 Rs-Pi ULN2803 8bit 2 Relay , 4 Relay, 8 Relay Board
- 9.19 Rs-Pi L293D-3 6 Motor Board support Rs-pi V2-P5
- 9.20 Rs-Pi L293D-2 4 Motor Board
- 9.21 Rs-Pi 8GPIO Switch & I2C 23017 (or SPI 23s17) 16 GPIO Board
- 9.22 Rs-Pi 4 USB hub & 7 USB hub with 1-Wire Board
- 9.23 Rs-Pi 2482-100 & 2482-800 1-Wire 9 channel Board
- 9.24 Rs-Pi i2c 18 bit 32 channel A/D Board
- 9.25 Rs-Pi i2c 18 bit 16 channel A/D Board
- 9.26 Rs-Pi USB to TTL console Board
- 9.27 Rs-Pi RS232 DB9 cable
- 9.28 Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor w/ DC Power supply
- 9.29 Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor
- 9.30 Rs-Pi LCD Master Board
- 9.31 Rs-Pi i2c LCD Master Board
- 9.32 Rs-Pi Power Bank Board
- 10 References
dresden elektronik
RaspBee
The RaspBee is an expansion board which brings ZigBee connectivity to the Raspberry Pi. The shield allows direct communication with ZigBee PRO devices like Philips Hue, XBee Series 2 and others.
Key Features:
- powered by Atmels ATmega256RFR2 (8-Bit AVR, 256 kB Flash, integrated RF transceiver)
- 500m signal range (power amplified)
- preflashed ZigBee firmware
- also supports custom firmware via bootloader
- extensive software package available
AB Electronics
ADC Pi V2 - Raspberry Pi Analogue to Digital converter
The ADC Pi V2.1 is an 8 channel 17 bit analogue to digital converter designed to work with the Raspberry Pi platform. The ADC Pi V2.1 is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs with up to 18 bit resolution.
Delta-Sigma Pi 18 bit Analogue to Digital converter
The Delta-Sigma Pi is an 8 channel analogue to digital converter designed for use on the Raspberry Pi computer platform. The board is based around the MCP3424 low noise and high accuracy 18 bit delta-sigma analogue to digital converter from Microchip Technology Inc. A pair of MCP3424 converters are included on the board along with an I2C buffer interface allowing you to connect additional 5V I2C devices to the same bus.
1-Wire Pi
The 1 Wire Pi from AB Electronics is a communication board supporting the 1-Wire® protocol. A 5V buffered I2C port is also provided on the board.
Com Pi RS232 Serial and 1-Wire
The Com Pi from AB Electronics is a communication board supporting RS232 and 1-Wire® protocols. A 5V buffered I2C port is also provided on the board.
IO Pi 32 Channel Port Expander
The IO Pi is a 32 channel digital expansion board designed for use on the Raspberry Pi computer platform. The board is based around the MCP23017 16-bit I/O expander from Microchip Technology Inc. A pair of MCP23017 expanders are included on the board allowing you to connect up to 32 digital inputs or outputs to the Raspberry Pi.
RTC Alarm Pi Real time Clock Module
The RTC Alarm Pi is a real-time clock expansion board for the Raspberry Pi and is based around the PCF8563 Real-Time Clock IC from NXP. The PCF8563 is controlled via the I2C port on the Raspberry Pi and includes an interrupt based alarm output which can be set to pull high at a specified date and time.
RTC Pi Real time Clock Module
The RTC Pi is a real time clock module which connects via the GPIO port on a Raspberry Pi.
Advamation
AdvaBoard RPi1
The AdvaBoard RPi1 is a multifunctional extension-board, which contains:
- TFT-display-interface (3.2" 320x240, 5" 800x480, 7" 800x480)
- touchscreen interface
- real-time-clock (RTC)
- CPLD + a microcontroller
- all I/Os are 5V-tolerant, except I2C
- analog-I/Os (4* 16bit inputs, 2* 8bit outputs)
- separate connectors for all interfaces (I2C, SPI, digital/analog-I/O, RS-232, RS-485 incl. pluggable terminator)
- power-management: battery-backed RPC/I2C-interfaces, power-down, power-up on time or event, separately powered peripherals
- JTAG-programmer for Xilinx CPLDs/FPGAs, C2-programmer for SiLabs C8051F*
- Software (C + Python 2.6/3.x libraries, free example programs)
Details can be found at www.advamation.com/products/embeddedpc/advaboard.html.
More boards (e.g. additional displays, I/Os, motors, sensors etc.), which can be connected to the Raspberry Pi and/or the AdvaBoard RPi1 will also be available soon.
Pi Supply - Pi Cocktails
The following add on boards will shortly be available from Pi Supply and are based on the Pi Cocktail series of boards explored in The MagPi magazine. More details to follow soon.
MyPiShop
Pi 8 LED & 8 Button
Pi 8 LED & 8 Button interface board for Raspberry Pi.
Perfect way to learn how to use the GPIO pins.
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
Has eight bright green LED's and eight momentary switches.
For a more detailed description see: http://mypishop.com/Pi%208%20LED%20&%208%20Button.html
Stepper Motor Controller Board
Pi Stepper Motor Controller interface board for Raspberry Pi.
The stepper board uses 8 GPIO pins to drive up to two stepper motors.
(One stepper motor is included in the kit)
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
The board can use the 5 VDC provided by the Raspberry Pi or you can optionally provide your own source voltage to drive the motors.
This board includes a ULN2803 8 Channel Darlington Driver and can be used to control other higher current devices such as relay boards, etc.
For a more detailed description see: http://mypishop.com/Stepper.html
Read Your Pi !(LCD Interface Board)
Read Your Pi (LCD) interface board for Raspberry Pi.
Available kits with 20x4 LCD display or 16x2 LCD display.
The interface board uses the GPIO pins display characters on a LCD display.
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
For a more detailed description see: http://mypishop.com/Read%20Your%20Pi%20!.html
Protect Your Pi ! (16 or 32 IO Expansion Kit)
Protect Your Pi (LCD) interface board for Raspberry Pi.
Available kits with 16 or 32 GPIO expansion pins.
The expansion board uses the I2C bus on the Raspberry Pi to provide up to 32 additional GPIO pins.
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
For a more detailed description see: http://mypishop.com
Pi MATRIX ! 8X8 LED Matrix with 16 bit I/O !
Pi MATRIX ! 8X8 LED Matrix with 16 bit I/O kit for the Raspberry Pi.
HUGE 8X8 LED MATRIX
Plugs directly into the Raspberry Pi GPIO connector. (P1 header)
Take the display off and use it for 16 bits of I/O
For a more detailed description see: http://mypishop.com
electronics.cat
3Bpi - Three Branch Pi
set05_08 aka 3Bpi translates bidirectionally inputs/outputs of the Raspberry Pi's GPIO from 3.3V to 5V TTL levels. It has three external ports to connect electronics.cat open source hardware boards. This board takes advantage of P5's Raspberry Pi, with access to a second I2C channel (I2C_0, it can be used without camera connected) and CTS and RTS for hardware flow control in serial communications. Two of 3Bpi's ports, P3 and P4, can be used as 8 bit input/output or I2C and/or SPI ports. One port, P2, is thought for serial communications and Raspberry Pi can be set as master or slave setting the jumpers properly.
Relays Board
set05_02 is a 4 relays board to be connected to 3Bpi. It can be expanded to another 4 relays board or an input board
Input Board
set05_02 is a 4 inputs board to be connected to 3Bpi. It can be expanded to another 4 inputs board or a 4 relays board
LEDs + microswitch
set01_04 is a universal 8 bit inputs (microswitch) / outputs (LEDs) to be connected to 3Bpi. Each bit is set as input or output through jumpers position.
Digital Input / Output I2C expander
set03_03 expands 16 inputs/outputs using TWI (I2C) to be connected to 3Bpi. Each board has two PCF8574. The lower bit is forced to a low level hardware (chip 1 A0 = 0 and chip 2 A0 = 1). Addresses A1 and A2 are set through SMD microswitch (SW1). The jumpers can notify if there is any change when reading, avoiding a constant reading of I2C bus. P1 and P2 connectors are designed to be connected in daisy chain up to four set03_03 boards (64 inputs / outputs).
RS232 to TTL converter
set01_03 translates RS232 signals to TTL to be connected to P2's 3Bpi serial communication port.
USB - RS232 TTL / I2C translator
set01_05 has three functions : 1st) translating USB to TTL Tx and Rx to be connected to 3Bpi, 2nd) converting USB to I2C and 3rd) supplying voltage to next board (it is not for 3Bpi) if jumper is between positions 1 and 2.
uC Atmega
set01_01 is a microcontroller board with two 8-bit ports of inputs/outputs and one serial communication port. It is useful when it is needed to implement some real time application. It can be connected to 3Bpi using any port. Usually through serial communication port.
MSL Digital Soulutions
RemotePi Board
The RemotePi Board is an intelligent infrared remote controlled power switch add-on board for the Raspberry Pi. It allows to switch power on and off using any button (configurable in learning mode) of an existing standard IR remote. Power is only cut after notifying the OS and giving it time to shut-down. It is mainly intended to remote control (using LIRC) and power off/on a mediacenter system. i.e OpenELEC, Raspbmc, XBian.
DTronixs
You can get these boards at tindie.com in the DTronixs store
MiniPiio L293D
MiniPiio L293D is a small (50x40mm) add-on board which provides a dual H-Bridge DC-Motor circuit using the venerable L293D chip.
MiniPiio Relay2
MiniPiio Relay2 is a small (50x40mm) add-on board which provides a two 1A DPCO Relays. Each relay has a set of screw terminals for easy wiring.
MiniPiio DIO16
MiniPiio DIO16 is a small (50x40mm) add-on board which provides an additional 16-channels of Digital Input/Outputs for the RPi. It can use either a MCP23S17 (SPI) or MCP23017 (I2C) Port Expander.
MiniPiio RS232
MiniPiio RS232 is a small (50x40mm) add-on board which provides a basic RS232 to TTL interface for the RPi. It uses a 3.3V MAX3232 to provide the RS232 interface.
MiniPiio ULN2803
MiniPiio ULN2803 is a small(50x40mm) add-on board which connects a ULN2803 Darlington Driver chip to the RPi's GPIO allowing the RPi to control electronic circuits which require more current to drive them.
RPi MIDI Breakout Board
RPi MIDI Breakout Board is a simple MIDI breakout board for the Raspberry Pi using the hardware UART from the RPi's expansion interface.
RPi Protoboard SM
RPi Protoboard SM is a simple prototype board for the Raspberry Pi. Here is another link to the same project.
RPi "UserPort"
RPi UserPort is a digital and analogue I/O board for the Raspberry Pi. UserPort replicates the original BBC Micros digital User Port and Analogue Port but uses more modern components such as the MCP23S17 16-ch GPIO and MCP3204 4-ch 12-bit ADC.
Pridopia
Pridopia Rs-pi serials for Raspberry Pi
Rs-Pi 4 USB hub & multi-function I2C AD/DA RTC RS232 board
Pridopia P-pi serials for Raspberry Pi
- The Rs-Pi Internal 4 Ports USB hub with multi-function I2C board
size 71mm x 54mm small than Raspberry Pi (RTC-DS1307, Temperature Sensor-TMP102, D/A MCP4725,A/D ADS1015,EEPROM, MCP23008, FT232RL, ZT3243) Rs-Pi-USB-hub-I2C-multi-function AD/DA Board with USB to RS232 full DB9 9pin signal or USB to TTL (FT232RL) console port), RTC with CR1220 battrey, USB with 1.6A PTC fuse for all four USB ports. No extra extension cable need. and no extra Power adapter for USB hub. All from Pridopia All of our Rs-Pi Products are design and Made in UK
We have four different models with different function, you can choose anyone you want.
- 1. Rs-Pi 4 USB Hub with ( ds1307) Rs-Pi 4 USB Hub RTC -Lite
- 2. Rs-Pi 4 USB Hub with ( ds1307,tmp102, mcp4725,24c32) Rs-Pi USB Hub-Lite
- 3. Rs-Pi 4 USB Hub with ( ds1307,tmp102, mcp4725,24c32, ft232RL) - with USB to TTL (just need one USB cable plug-in your PC and Rs-Pi) Rs-Pi USB Hub FT232RL-Lite
- 4 Rs-Pi 4 USB Hub with ( ds1307,tmp102, mcp4725,ads1015, 24c32, mcp23008, ft232RL, zt3243) with USB to RS232 (DB9 full 9pin RS232 COM port output) or USB to TTL console port Rs-Pi-USB-hub-I2C-multi-function AD/DA Board
All of our Rs-Pi Products are design and Made in UK
Rs-Pi 4 USB hub with I2C 23017x2 32 GPIO board
Pridopia P-pi serials for Raspberry Pi
- The Rs-Pi Internal 4 Ports USB hub with I2C 23017x2 32 GPIO board
size 71mm x 54mm small than Raspberry Pi Rs-Pi-4-USB-hub-I2C-23017x2 Board All from Pridopia All of our Rs-Pi Products are design and Made in UK
Rs-Pi 4 USB hub with SPI 23s17x2 32 GPIO board
Pridopia P-pi serials for Raspberry Pi
- The Rs-Pi Internal 4 Ports USB hub with SPI 23s17x2 32 GPIO board
size 71mm x 54mm small than Raspberry Pi Rs-Pi-4-USB-hub-SPI-23s17x2 Board All from Pridopia
Rs-Pi 7 USB hub with multi-function I2C AD/DA board
Pridopia P-pi serials for Raspberry Pi
- The Rs-Pi Internal 7 Ports USB hub with multi-function I2C board
size 71mm x 54mm small than Raspberry Pi (RTC-DS1307, Temperature Sensor-TMP102, D/A MCP4725,A/D ADS1015,EEPROM) Rs-Pi-7-USB-hub-I2C-multi-function AD/DA Board RTC with CR2032 battrey, USB with 2 x 1.6A PTC fuse for all seven USB ports. No extra extension cable need. and no extra Power adapter for USB hub. All from Pridopia
We have two different models with different function, you can choose anyone you want.
- 1. Rs-Pi 7 USB Hub with ( ds1307,tmp102,24c32) Rs-Pi 7 USB Hub -Lite
- 2. Rs-Pi 7 USB Hub with ( ds1307,tmp102,24c32,ads1015,mcp4725 ) Rs-Pi 7 USB Hub AD/DA Board
Rs-Pi 7 USB hub with I2C 23017x1 16 GPIO board
Pridopia P-pi serials for Raspberry Pi
- The Rs-Pi Internal 7 Ports USB hub with I2C 23017 16 GPIO board
size 71mm x 54mm small than Raspberry Pi Rs-Pi-7-USB-hub-I2C-23017 Board All from Pridopia
Rs-Pi 7 USB hub with SPI 23s17x1 16 GPIO board
Pridopia P-pi serials for Raspberry Pi
- The Rs-Pi Internal 7 Ports USB hub with SPI 23S17 16 GPIO board
size 71mm x 54mm small than Raspberry Pi Rs-Pi-7-USB-hub-SPI-23S17 Board All from Pridopia
Rs-Pi I2C 23017 x2 (or SPI 23s17 x2) 32 GPIO with uln2803 x2 board
Pridopia P-pi serials for Raspberry Pi
- 1. The Rs-Pi I2C 23017x2 32 GPIO with 8 Switch input & uln2803x2 output board
each 23017 port A output to ULN2803, first one 23017 port B for 8 switch input, second one 23017 port B for normal output with 8 LED. with 3.5mm block terminal 9pin output, can plug in our 2803 relay board with two Step motor connector (5V,D0,D1,D2,D3) (5V,D4,D5,D6,D7) can use Step motor (28BYJ-48 5VDC) with 4 5V motor output port size 71mm x 54mm small than Raspberry Pi Rs-Pi-I2C-23017x2-2803x2 Board
- 2. The Rs-Pi SPI 23s17x2 32 GPIO with 8 Switch input & uln2803x2 output board
each 23s17 port A output to ULN2803, first one 23s17 port B for 8 switch input, second one 23s17 port B for normal output with 8 LED. with 3.5mm block terminal 9pin output, can plug in our 2803 relay board with two Step motor connector (5V,D0,D1,D2,D3) (5V,D4,D5,D6,D7) can use Step motor (28BYJ-48 5VDC) with 4 5V motor output port size 71mm x 54mm small than Raspberry Pi Rs-Pi-SPI-23s17x2-2803x2 Board All from Pridopia
Rs-Pi I2C 23017 -2 or SPI 23s17 -2 - 32 GPIO Board
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi I2c 23017 x2 32GPIO board I2C interface
size 49mm x 49mm with 32 Blue SMD LED Rs-Pi-23017-2 -pi serials for Raspberry Pi
- 2. Rs-Pi SPI 23s17 x2 32GPIO Board SPI Interface
size 49mm x 49mm with 32 Blue SMD LED Rs-Pi-23S17-2
Rs-Pi I2C 23017 -4 or SPI 23s17 -4 - 64 GPIO Board
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi I2c 23017 x4 64 GPIO board I2C interface
size 71mm x 54mm small than Raspberry Pi with 64 Blue SMD LED Rs-Pi-23017-4
- 2. Rs-Pi SPI 23s17 x4 64 GPIO Board SPI Interface
size 71mm x 54mm small than Raspberry Pi with 64 Blue SMD LED Rs-Pi-23S17-4
Rs-Pi I2C 23017 -8 or SPI 23s17 -8 - 128 GPIO Board
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi I2c 23017 x8 128GPIO board I2C interface
size 71mm x 54mm small than Raspberry Pi Rs-Pi-23017-8
- 2. Rs-Pi SPI 23s17 x8 128GPIO Board SPI Interface
size 71mm x 54mm small than Raspberry Pi Rs-Pi-23S17-8
Rs-Pi I2C 32 Channel PWM /Servo Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi I2c 32 channel PWM / Servo board I2C interface
size 71mm x 54mm small than Raspberry Pi Rs-Pi-9685-2
Rs-Pi I2C 16 Channel PWM /Servo & I2C 23017 (or SPI 23s17) 16 GPIO Board
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi I2c 32 channel PWM / Servo board & I2C 23017-1 16 GPIO + uln2803 for Port A
size 71mm x 54mm small than Raspberry Pi Rs-Pi-9685-23017
- 2. Rs-Pi I2c 32 channel PWM / Servo board & SPI 23S17-1 16 GPIO + uln2803 for Port A
size 71mm x 54mm small than Raspberry Pi Rs-Pi-9685-23s17
Rs-Pi I2C 24x16 LED Matrix Board
Pridopia P-pi serials for Raspberry Pi Rs-Pi I2c 24x16 LED Matrix Board size 71mm x 54mm small than Raspberry Pi Rs-Pi-24x16 LED Matrix
Rs-Pi I2C 16x16 LED Matrix Board
Pridopia P-pi serials for Raspberry Pi Rs-Pi I2c 24x16 LED Matrix Board size 71mm x 54mm small than Raspberry Pi Rs-Pi-16x16 LED Matrix
Rs-Pi ULN2803 & SPI AD/DA & I2C 1-Wire - special for rs-pi v2-p5
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi ULN2803 & SPI AD/DA with 1-Wire (V2-P5 support) Board
ULN2803 8 Darlington transistor array output can output to 8 5V relay with 2 Step motor connector,can connect Step motor(28BYJ-48 5VDC) and MCP3002 SPI Interface 10 bit Analog-to-Digital Converter and MCP4802 SPI Interface 8 bit Digital-to-Analog Converter size 49mm x 39mm Rs-Pi-2803-1-Wire
Rs-Pi ULN2803 8bit 2 Relay Board + 2 Step Motor Port
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi ULN2803 2 Relay Board + 2 Step Motor Port
ULN2803 8 Darlington transistor array output size 55mm x 40mm Rs-Pi-2803-2Relay-StepMotor
Rs-Pi ULN2803 & SPI AD/DA Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi ULN2803 & SPI AD/DA Board
ULN2803 8 Darlington transistor array output can output to 8 5V relay with 2 Step motor connector,can connect Step motor(28BYJ-48 5VDC) and MCP3002 SPI Interface 10 bit Analog-to-Digital Converter and MCP4802 SPI Interface 8 bit Digital-to-Analog Converter size 49mm x 39mm Rs-Pi-2803-ADDA
Rs-Pi ULN2803 8bit 2 Relay , 4 Relay, 8 Relay Board
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi ULN2803 2 Relay Board
ULN2803 8 Darlington transistor array output size 49mm x 40mm Rs-Pi-2803-2Relay
- 2. Rs-Pi ULN2803 4 Relay Board
ULN2803 8 Darlington transistor array output size 76mm x 36mm Rs-Pi-2803-4Relay
- 3. Rs-Pi ULN2803 8 Relay Board
ULN2803 8 Darlington transistor array output size 76mm x 76mm Rs-Pi-2803-8Relay
Rs-Pi L293D-3 6 Motor Board support Rs-pi V2-P5
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi L293D-3 6 Motor Board support Rs-Pi- V2 P5
size 55mm x 56mm Rs-Pi-L293D-3 Motor Board All of our Rs-Pi Products are design and Made in UK
Rs-Pi L293D-2 4 Motor Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi L293D-2 4 Motor Board
size 55mm x 56mm Rs-Pi-L293D-2 Motor Board
Rs-Pi 8GPIO Switch & I2C 23017 (or SPI 23s17) 16 GPIO Board
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi 8GPIO Switch & I2C 23017-1 16 GPIO + uln2803 for Port A
size 71mm x 54mm small than Raspberry Pi Rs-Pi-23017-8-Switch
- 2. Rs-Pi 8GPIO Switch & SPI 23S17-1 16 GPIO + uln2803 for Port A
size 71mm x 54mm small than Raspberry Pi Rs-Pi-23s17-8-Switch
Rs-Pi 4 USB hub & 7 USB hub with 1-Wire Board
Pridopia P-pi serials for Raspberry Pi
- 1. Rs-Pi 4 USB hub & multi function & 1-Wire Board
size 71mm x 54mm small than Raspberry Pi Rs-Pi-4hub-1Wire
- 2. Rs-Pi 7 USB hub & multi function & 1-Wire Board
size 71mm x 54mm small than Raspberry Pi Rs-Pi-7hub-1Wire
Rs-Pi 2482-100 & 2482-800 1-Wire 9 channel Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi 2482-800 & 2482-100 9 Channel 1-Wire Board
DS2482-800 8 channel with 8 ESD diode & DS2482-100 with 1 ESD diode 1 channel 1-Wire board with AM2302 sockt & DS18B20 socket size 71mm x 54mm Rs-Pi-9Channel-1-Wire
Rs-Pi i2c 18 bit 32 channel A/D Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi i2c 18bit 32 Channel A/D Board
i2c 18bit 32 channel A/D board size 71mm x 54mm Rs-Pi-32Channel-A/D
Rs-Pi i2c 18 bit 16 channel A/D Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi i2c 18bit 16 Channel A/D Board
i2c 18bit 16 channel A/D board size 71mm x 54mm Rs-Pi-16Channel-A/D Board
Rs-Pi USB to TTL console Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi USB to TTL Console Board
USB to TTL Console module plug in Rs-Pi with normal USb to Mini USb cable with your PC or Mac size 32mm x 39mm Rs-Pi-USB-TTL Console Board
Rs-Pi RS232 DB9 cable
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi RS232 DB9 console cable with 90cm length cable Rs-Pi-RS232-DB9
Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor w/ DC Power supply
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor w/ DC Power supply Rs-Pi-16 channel PWM/Servo & 2 L293D 4 Motor & DC Power Supply
Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi 16 channel PWM/Servo & L293D-2 4 Motor Rs-Pi-16 channel PWM/Servo & 2 L293D 4 Motor
Rs-Pi LCD Master Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi LCD Master Board support GPIO 84x48 LCD, GPIO 16x2 LCD, GPIO 20x4 LCD Rs-Pi LCD Master Board
Rs-Pi i2c LCD Master Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi LCD Master Board support GPIO 84x48 LCD, i2c 16x2 LCD, i2c 20x4 LCD Rs-Pi i2c LCD Master Board
Rs-Pi Power Bank Board
Pridopia P-pi serials for Raspberry Pi
- Rs-Pi DC Power Bank Board provide 5V, 3.3V, GND signal, also provide 4 extra logic level converter on board, with 2 channel i2c input socket with logic level converter Rs-Pi DC Power supply multi-function Board
New Scratch software support our full range products Scratch interface
All of our Rs-Pi Products are design and Made in UK All can plug in our RS-Pi USB hub multi-function Board and work together.
References
|