RPi Peripherals
Setup examples for various peripherals
Wireless: TP-Link TL-WN722N USB wireless adaptor (Debian 6)
See also:
http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing
http://omer.me/2012/04/setting-up-wireless-networks-under-debian-on-raspberry-pi/
This will serve as a general guide for USB wireless devices but may need modifying for your specific one.
- Edit /etc/apt/sources.list to add the non-free archive and backports (eg: sudo vi /etc/apt/sources.list):
deb http://ftp.us.debian.org/debian/ squeeze main non-free deb http://security.debian.org/ squeeze/updates main non-free deb http://ftp.us.debian.org/debian/ squeeze-updates main non-free deb http://backports.debian.org/debian-backports squeeze-backports main non-free
- Update the package cache:
sudo apt-get update
- Download the wifi utils:
sudo apt-get install wireless-tools usbutils
- Download the required firmware and put it in the correct location - you may not need to do this for your adaptor or you may need different firmware - see below.
sudo apt-get install firmware-atheros sudo wget http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw sudo cp htc_9271.fw /lib/firmware
- Add adaptor definition to network config - eg: sudo vi /etc/network/interfaces - add the wlan0 section:
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or # /usr/share/doc/ifupdown/examples for more information. auto lo iface lo inet loopback iface eth0 inet dhcp # The wireless interface auto wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa.conf
- Create the wpa.conf file - eg: sudo vi /etc/wpa.conf:
network={ ssid="NETWORK-SSID" proto=RSN key_mgmt=WPA-PSK pairwise=CCMP TKIP group=CCMP TKIP psk="YOUR-WLAN-PASSWORD" }
- Plug in adaptor
- Confirm adaptor is present:
root@raspberrypi:~# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off
Firmware requirements
If no wlanx device is shown, you might need to download firmware for your USB wifi device (or track down other compatible drivers if they are available). To confirm this, check the dmesg output when you plug in your adaptor - typing dmesg at the command prompt may be sufficient - and look for information related to your adaptor - the example dmesg output below shows what is seen in the event of the TP-Link firmware not being present - notice that the name of the required firmware file is given (htc_9271.fw), the driver name (ath9k_htc) and an error -22 message:
usb 1-1.2.4.2: ath9k_htc: Firmware - htc_9271.fw not found ath9k_htc: probe of 1-1.2.4.2:1.0 failed with error -22 usbcore: registered new interface driver ath9k_htc
Armed with this information, try a web search for 'debian 6' and the name of the driver or driver file and/or head over to http://linuxwireless.org
Wlan setup
Once your adaptor is listed, you need to set it up...
To be continued - sorry, I have work to do - but if someone else wants to dive in here before I get back be my guest!!