Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

RPi Peripherals

From eLinux.org
Revision as of 10:06, 17 April 2012 by Linker3000 (Talk | contribs)

Jump to: navigation, search

Setup examples for various peripherals

Wireless: TP-Link TL-WN722N USB wireless adaptor (Debian 6)

This will serve as a general guide for USB wireless devices but may need modifying for your specific one.

  • Edit /etc/apt/sources.list to add the non-free archive and backports:
 deb http://ftp.us.debian.org/debian/ squeeze main non-free
 deb http://security.debian.org/ squeeze/updates main non-free
 deb http://ftp.us.debian.org/debian/ squeeze-updates main non-free
 deb http://backports.debian.org/debian-backports squeeze-backports main non-free
  • Update the package cache:
 apt-get update
  • Download the required firmware and put it in the correct location - you may not need to do this for your adaptor.
 wget http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw
 cp htc_9271.fw /lib/firmware
  • Plug in adaptor
  • Confirm adaptor is present:
 root@raspberrypi:~# iwconfig
  lo        no wireless extensions.

  eth0      no wireless extensions.

  wlan0     IEEE 802.11bgn  ESSID:off/any
            Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm
            Retry  long limit:7   RTS thr:off   Fragment thr:off
            Encryption key:off
            Power Management:off

If no wlanx device is shown, you might need to download firmware for your USB wifi device (or track down other compatible drivers if they are available). To confirm this, check the dmesg output when you plug in your adaptor - typing dmesg at the command prompt may be sufficient - and look for information related to your adaptor - the example dmesg output below shows what is seen in the event of the TP-Link firmware not being present - notice that the name of the required firmware file is given (htc_9271.fw), the driver name (ath9k_htc) and an error -22 message:

  usb 1-1.2.4.2: ath9k_htc: Firmware - htc_9271.fw not found
  ath9k_htc: probe of 1-1.2.4.2:1.0 failed with error -22
  usbcore: registered new interface driver ath9k_htc

Armed with this information, try a web search for the name of the driver or driver file and/or head over to http://linuxwireless.org

Wlan setup

Once your adaptor is listed, you need to set it up...

To be continued - sorry, I have work to do - but if someone else wants to dive in here before I get back be my guest!!

Linker3000