Difference between revisions of "RPi VNC Server"
m (→What skill level is required?)
|Line 1:||Line 1:|
Back to [[RPi
Back to [[RPi ]].
Revision as of 05:42, 24 April 2012
Back to RPi Guides.
Raspberry Pi VNC Server
What does it do?
What do you need?
- A Raspberry Pi, model B.
- A boot SD card for the Raspberry Pi.
- A network connection (Ethernet or WiFi).
What skill level is required?
This project does not require any coding or compilation. Very basic Linux and networking knowledge would be useful, but not essential.
You need to...
- Install software
- Enter basic Linux commands
- Use standard software tools (Windows/Linux/Mac) to add software to your PC
- Connect computers using ethernet cables
How does it work?
Overview of this project
You need to
- Install a VNC server on the Raspberry Pi
- Start the VNC server
- Install a VNC client on another computer
Log in to your Pi and install the Tight VNC Package
$ sudo apt-get install tightvncserver
Next Run TightVNC Server which will prompt you to enter a Password and an optional View Only Password
Once that is done you can run it straight from the prompt I am using 1920x1080 which is my monitor maximum resolution.
$ vncserver :1 -geometry 1920x1080 -depth 24
Or you could create a script to save typing in the whole thing.
$ nano svnc.sh (call the file whatever you like and ending in .sh)
Add the line:
vncserver :1 -geometry 1920x1080 -depth 24
Ctrl-x y <return> (To Exit Nano and Save)
Set the file to Execute
$ chmod +x svnc.sh
then to run
ToDo: Run at boot.
Install Tight VNC on your desktop from the link below or most VNC clients work I believe.
Then use <Your Pi IP>:1 (e.g. 192.168.1.2:1) as the host name when connecting.
Works Great, select full screen from the tool bar and a full 1080p 24bit desktop is yours from anywhere.