Difference between revisions of "RPi VerifiedPeripherals"

From eLinux.org
Jump to: navigation, search
(Problem SD Cards: Link to Debian Wheezy discussion thread)
(Working SD Cards: Samsung 32GB SDHC Class 10 fine with Debian Wheezy)
Line 848: Line 848:
 
** 16GB SDHC Class 6 (MB-SSAGAEU)
 
** 16GB SDHC Class 6 (MB-SSAGAEU)
 
** 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)
 
** 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)
 +
** 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) fine with [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 Debian Wheezy], but does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).
 
* '''SanDisk'''  
 
* '''SanDisk'''  
 
** 2GB SD, white "SanDisk for Wii" branded, no class mentioned
 
** 2GB SD, white "SanDisk for Wii" branded, no class mentioned

Revision as of 04:39, 16 June 2012


RaspPi.png Back to the Hub


Hardware & Peripherals:

Hardware - detailed information about the Raspberry Pi boards.

Hardware History - guide to the Raspberry Pi models.

Low-level Peripherals - using the GPIO and other connectors.

Expansion Boards - GPIO plug-in boards providing additional functionality.

Screens - attaching a screen to the Raspberry Pi.

Cases - lots of nice cases to protect the Raspberry Pi.

Other Peripherals - all sorts of peripherals used with the Raspberry Pi.


A note about this page: For USB devices, please specify if they required a powered hub

Notes

19-Apr-2012: Now that the Model B board is shipping, details added should relate to this board and the default Debian distribution unless stated otherwise. A suggested suffix markup scheme is as follows:

  • (A) - Relates to model A production board
  • (B) - Relates to model B production board
  • (!) - Information from alpha and beta board days -- beta board verified peripherals should still apply to production boards for the most part, but the alpha board is fairly different
  • No markup - relates to all production boards

Discuss: http://www.raspberrypi.org/forum/?mingleforumaction=viewtopic&t=247

If you are adding to a product list it would help clarity if entries are kept/added in alphabetical order.

Warning Warning: Adding peripherals may increase the loading on the power supply to your board and this, in turn, may affect the voltage presented to the RPi. If the RPi's supply voltage falls below a certain value (anecdotally stated as around 4.75V), or it begins to fluctuate, your setup may become unstable. There is a Wiki section about this issue which is worth a read.

Powered USB Hubs

A number of low-cost powered USB hubs are known to have caused problems. Members of the Raspberry Pi forums have reported low power or no power at all in some cases. The following is a list of specific Powered USB Hubs which appear to be fault-free. Please note that these do not take into account powering the Raspberry Pi from the hub, in addition to its peripherals.

Working USB Hubs

  • Belkin
    • F4U040 4-Port Ultra-Slim Desktop hub (powered 5v, 2.6A)
    • F5U224 4 port powered USB hub
    • F5U231 Hi-speed USB 2.0 Tertrahub - 4 port powered USB hub
    • F5U706ea/uk 2-in-1 Hub (USB 2.0, powered, 7-port)
  • Digicom
    • [1]MiniHUB 4-Port USB 2.0 with PSU 5V - 2A .
  • HP
    • HP ZR2240w 21.5" Monitor with built in 2-Port USB Hub (B)
  • Logik
    • LP4HUB10 4-Port USB Hub
  • LogiLink
    • UA0085 USB 2.0 Hub, 4-Port with PSU 5V, 2A
    • UA0096 USB 2.0 Hub, 10-Port with PSU 5V, 3.5A
  • Newlink
    • NLUSB2-224P 4 port USB 2.0 Mini hub with PSU 5V 1A
  • SumVision
    • Sumvision Slim 4 Port High Speed USB 2.0 HUB with PSU 5V 1.0A (from | 7dayshop )
  • Targus
    • ACH81xx 7-port powered hub. 5V 3A power supply, with 2 high power ports. (possible conflicting behaviour with USB keyboard / Wifi Dongles)

Problem USB Hubs

  • Belkin
    • 7-Port Powered Mobile Hub - device labelled F4U018, packaging labelled F5U701. lsusb reveals it to be two Genesys Logic 4-port hubs based on the GL850G chipset (vendor: 0x05e3 product: 0x0608) ganged together. Yields a lot of "handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" errors and device resets in /var/log/messages. Low speed devices such as keyboards work OK, wifi/mass storage is unreliable or broken.
    • 7-Port Powered Hub - device labled F5U237 Rev.3 - ID 050d:0237 Wired ethernet fails to connect; gives "DWC OTG HCD URB enqueue failed adding QTD. Error status -4008" Result is same as DUB-H7 below.
    • F5U404 Hi-Speed USB 2.0 4-Port Mobile Hub. Faulty/bad design; Leaks current back up the cable to the Raspberry Pi.
  • DELTACO
    • 7-Port USB Hub UH-713 Rev 3. This one consists also of two 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUBs connected together. The power supply is rated at 5 V 2 A. It kills ethernet when X11 is started.
  • D-Link
    • 7-Port USB Hub DUB-H7 (Prevents ethernet from being recognised so wrong time & no IP address).
  • E-Solution
    • 4-Port 2A Supply (Does not detect at all during boot or after boot- no messages) [IC = Alcor Micro Corp (AU6254)]
  • Kensington
    • 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning keyboard, kills mouse when GUI started).
  • Inland
    • 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't, cheap unshielded untwisted wire design)
  • Soniq
    • 4-Port 5V supply. Model number CUH100. (B). Appears to draw power away from the Raspberry Pi, even when the Pi has an isolated power line. Netgear WNA1100 WiFi Adapter (which is known to work in other setups is recognized, but unresponsive.
  • Unbranded / Multiple Brands
    • 7-port silver/black hub. Also sold elsewhere under brands such as 'EX-Pro', 'Trixes' and 'Xentra' -- This is probably due to an inadequate power supply. -- I replaced the terrible power supply with a very good one, kept getting "DEBUG: handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK" in dmesg, with no devices plugged in to the hub (with or without the power supply in)
    • Generic 7-port black hub with Genesys Logic GL850A chipset
    • Cerulian 10 Port USB 2.0 Top Loading Hub with 2A supply (kills mouse and network port)[1]
    • USB 2.0 4 PORT INT/EXT DUAL HUB BAY -- Genesys Chipset -- idVendor=05e3, idProduct=0607 -- low speed devices worked, but strange USB failures when X session started. High speed devices such as hard drives had failures.

USB Remotes

  • [2] DIGICOM WKEYPE01 - Mini RF Wireless Keyboard and touchpad

USB Keyboards

USB keyboards that present themselves as a standard HID (Human Interface Device) device should work. Please be aware that some of these keyboards were probably used with a powered hub

Working USB Keyboards

The following is a list of specific keyboards known to work and which appear to be fault-free.

  • A4 Tech
    • Model KL-5 USB Keyboard, 20mA.
  • ABS
    • M1 Heavy Duty Professional Gaming Mechanical Keyboard (B)
  • Accuratus
    • KYB-Toughball-HI
  • Acer
    • KG-0917 Wireless Keyboard And Mouse Bundle (B)
    • KU-0906 Compact Keyboard (B) (Also known as Genius LuxeMate i200 Keyboard)
    • SK-9625 Multimedia Keyboard (B) (multimedia functions not tested)
  • Apple
    • Apple Keyboard (109 keys) A1048 - requires powered hub
    • Apple Keyboard with Numeric Keypad (aluminium/wired) A1243
  • Asda
    • Basic Wired Keyboard HK2026 (B)
    • Basic Wired Keyboard HK3014
      • (Please note when I put this keyboard through Newlink USB hub, it didn't work as expected)
  • Asda
    • Premium Wireless Keyboard (white keys, silver back) HK8028
    • Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)
  • Bush
    • Wired Slimline Keyboard KU-0833
      • This does not require a USB hub in order to work with the Raspberry Pi
      • In the UK, it is available from Argos for £9.99
  • Cerulian
    • Mini wireless keyboard and mouse deskset (B)
  • Cherry
    • CyMotion Master Linux (B)
    • RS 6000 USB ON
  • Dell
    • SK-8135 (B) (Rated 1.5A. Takes too much power from pi even when not used as USB hub. Symptom = repeated keystrokes)
    • SK-8115 (B) (Rated 100mA. Works directly in pi)
    • L100 (B)
  • Das Keyboard
    • Model S Professional Keyboard (Built in USB hub not tested) (B)
  • Dynex
    • DX_-WKBD (60ma) (B)
  • EAPPLY
    • EBO-013 Wireless 2.4GHz compact keyboard with touchpad. Rated <40mA works directly from Pi. eBay ref 260962010276 from Shenzen, China.
  • Emprex
    • Wireless Media Control Keyboard With Trackball 9039ARF III (Media functions untested)
  • Fujitsu Siemens
    • KB SC USB UK (!)
    • KB910 USB, with led light on the highest level (B)
    • KB400 USB US
  • Gear Head
    • KB3700TP (USB Mini Smart Touch Touchpad Keyboard) (B)
    • KB3800TP (Wireless Touch Mini Touchpad Keyboard with Smart Touch) (B)
      • Works when plugged directly into Raspberry Pi, did not work with powered hub (could be a hub issue)
    • KB4950TPW (Wireless Touch II Touchpad Keyboard) (B)
  • Genius
    • Ergomedia 700 (GK-04008/C) used without Hub
    • KB-06XE (K639) (B)
    • Slimstar 8000 wireless keyboard
  • HP
    • KG-1061
    • KG-0851 Wireless Keyboard and Mouse
    • KU-0316 (B)
  • Hyundai
    • HY-K201
  • IOGEAR
    • IOGEAR GKM561R Wireless HTPC Multimedia Keyboard with Trackball
  • Jenkins
    • Jenkins Wireless Desktop Set Blue (B)
  • KeySonic
    • ACK-540RF
    • ACK-3700C
  • Lenovo
    • SK-8825 UK (B)
    • Lenovo Enhanced Multimedia Remote with backlit keyboard N5902 (US)
    • Lenovo Mini Wireless Keyboard N5901 (US)
  • Logik
    • Ultra slim keyboard LKBWSL11 (B)
  • Logitech
    • diNovo Mini wireless keyboard with media controls and clickpad 920-000586 (B)
    • Wii wireless keyboard KG-0802 (!)
    • C-BG17-Dual Wireless keyboard and mouse with wired USB receiver (B)
    • Deluxe 250 Keyboard
    • MK 220 wireless keyboard and mouse
    • MK 250 wireless keyboard and mouse
    • MK 260 wireless keyboard and mouse
    • MK 320 wireless keyboard and mouse [3]
    • MK 520 wireless keyboard and mouse
    • MK 550 wireless keyboard and mouse (B)
    • EX110 Cordless Desktop, wireless keyboard and mouse (B)
    • K120 Keyboard (B)
    • K200 Keyboard (B)
    • K350 Wireless Keyboard (B)
    • K360 Wireless Keyboard (B)
    • K400 wireless keyboard with touchpad (B)
    • K520 Keyboard (B)
    • K750 Wireless Solar Keyboard (B)
    • Ultra-Flat Keyboard (M/N Y-BP62A P/N 820-000245 PID SY126UK)labelled 100 mA. OK direct into Model B RPi.
  • Microsoft
    • Wired Keyboard 600 Model 1366 (Debian 28-May-2012 on Production Model B)
    • Comfort Curve Keyboard 2000 v1.0 (Debian 13-Apr-2012 on Production Model B)
    • Comfort Curve Keyboard 3000 for Business
    • Microsoft Digital Media Pro Keyboard Model : 1031 (Debian 13-Apr-2012)
    • Microsoft Wireless Desktop 700 Keyboard v2.0 (Raspbian Pisces image 08-June-2012 on Production Model B)
  • Mikomi
    • Wireless Deskset KM80545 Keyboard and mouse (Works but range is terrible less than a metre) (B)
  • Monoprice
  • Perixx
    • Periboard 716 Wireless Ultra-Slim Keyboard with Touchpad (Debian 07-Jun-2012 on Production Model B)
  • Philips
    • Wired Multimedia Keyboard SPK3700BC/97 (Debian 19-Apr-2012 on Production Model B)
  • Rapoo
    • Rapoo E9080 Wireless Ultra-Slim Keyboard with Touchpad
  • Riitek
    • RT-MWK03 mini wireless keyboard & trackpad
  • Saitek
    • Eclipse II Backlit Keyboard PK02AU (B)
    • Eclipse Backlit Keyboard PZ30AV (B)
    • Expression Keyboard (US)
    • Cyborg V.5 (B)
  • Silvercrest
    • MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B)
  • Sony
    • Keyboard for PlayStation 2 (PS2) Linux. Works without powered hub with 5v1A supply, requires manual keyboard remapping with Debian Squeeze to USA 101-key layout.
  • SteelSeries
    • Merc keyboard (B)
  • Sun microsystems
    • Model: Type 7 , SUN PN: 320-1348-02 (Danish key layout)
  • Technika
    • WKEY03 (B)
    • TKD-211
  • Tesco
    • Value Keyboard VK109 (B)
    • Multimedia K211 Wired Keyboard (B)
  • Q-Connect
    • AK-808 (B)
  • Xenta
    • 2.4GHz Wireless Multimedia Entertainment Keyboard with Touchpad (B)
    • Multimedia Wireless Keyboard and Mouse Set (Keyboard Model: HK3518B) (B)

Problem USB Keyboards

  • Accuratus
    • Accuratus KYBAC100-101USBBLK causes kernel panic (rated 100mA). Tested with 1000mA cheap unbranded and Nokia 1200mA power adaptors.
  • Argos
    • Argos Value Wired Keyboard causes kernel panic
  • Choidy
    • Identifiers from usb-devices: Vendor=1a2c ProdID=0002 Rev=01.10 Product=USB Keykoard (yes, 'Keykoard') causes kernel panic
  • Cit
    • KB-1807UB Causes kernel panic (Rated <200ma)
  • Dell
    • SK-8115 causes kernel panic (rated 100mA) Debian 6-19-04-2012 (B)
  • Gear Head
    • KB2300U - Causes kernel panic (B)
  • Inland
    • Inland USB Keyboard Model #70010
  • Microsoft
    • Wireless Desktop 800 - Keyboard has 'sticky' keys. (B)
    • Wireless Entertainment Keyboard - No key input recognized (possibly connectivity issue as pairing devices does not seem to work)
    • Wireless Optical Desktop 1000 - Keyboard has 'sticky' keys (B)
    • Wireless Keyboard 2000 - Keyboard has 'sticky' keys. (B)
    • Arc wireless - Keyboard has 'sticky' keys. (B)
    • Sidewinder X6 - Keyboard has 'sticky' keys. (B)
    • Wireless Comfort Keyboard 5000 - Keyboard has 'sticky' keys. (B)
  • Novatech
    • NOV-KEY2 - Causes kernel panic (B)[2]
  • Unbranded
    • Compuparts
    • model no. HK-6106 (B) [3]
    • LK-890 (Multimedia keyboard & Optical Mouse) - kernel panic on Debian Squeeze, ArchLinux and Qtonpi.
  • Logik
    • Wired Multimedia Keyboard Model: LKBWMM11 - causes kernel panic (on Debian 190412 distro) (B)
  • Logitech
    • Logitech Illuminated Keyboard (unstable; not working with led light on; testet both US and NO layouts with both Apple iPad 2 and Asus TF-101 USB chargers)
    • G110 Gaming Keyboard - only works with illumination off, otherwise unresponsive. Once failed it needs reconnecting before another attempt. (B)
    • G15 Gaming Keyboard - LCD and key backlights flicker, 95% unresponsive to typing. I don't know of a way to turn the illumination off. (B)
  • PC World Essentials
    • PKBW11 Wired Keyboard - no power to keyboard, no error messages on both Arch 29-04-2012 and Debian6-19-04-2012, same Pi works with Asda keyboard. Me too, but caused a kernel panic -- tested on powered hub and direct.
  • Razor
    • Razer Tarantula gaming keyboard - sticky keys, could be power issue as is programmable with host powered USB hub and audio jacks.
  • Texet
    • MB-768B standard keyboard (Rated 5V 1.5A(!), so probably too much power drain. Kernel panic, Debian6-19-04-2012)
  • Trust
    • TRUST GXT 18 Gaming Keyboard - No power to keyboard, could be a driver issue - no error messages.
  • Wilkinsons / TEXET
    • Model MB-768B causes kernel panic on debian6-19-04-2012.
  • Xenta
    • HK-6106 - causes kernel panic (on Debian 190412 distro)(B)
  • Jeway
    • JK-8170 "The Hunter" - causes kernel oops (Debian6-19-04-2012) (B)

USB Mouse devices

USB mouse devices that present themselves as a standard HID (Human Interface Device) device should work, however some hardware requires special drivers or additional software, usually only compatible with Windows operating systems.

Working USB Mouse Devices

The following is a list of specific mouse devices known to work and which appear to be fault-free.

  • A4Tech
    • OP-530NU Padless Wired Mouse
  • Asda
    • HM5058 (Smart Price) Wired Mouse
    • Wireless Multimedia Deskset (keyboard, mouse and USB dongle) Model: HKM8016B (Note: Shown on Asda Website as HK8016B) (B)
  • Belkin
    • F8E882-OPT (B)
  • Dell
    • M-UVDEL1 (B)
    • M056U0A (B)
  • Dynex
    • DX-WMSE (100ma) (B)
  • Filand
    • OP-102i Mini Optical Mouse
  • Genius
    • GM-04003A (B)
    • Slimstar 8000 wireless mouse (Can be intermitent. Mouse pointer sometimes is irratic.)
  • HP
    • MN-UAE96 (The basic stock HP wired mouse)(B)
  • Jenkins
    • Jenkins Wireless Desktop Set Blue (B)
  • Logik
    • Wired Optical Glow Mouse Model: LGGMO10. (B)
  • Logitech
    • M90 optical mouse
    • G5 Logitech Gaming Mouse (B)
    • G500 Logitech Gaming Mouse (B)
    • G700 Logitech Wireless Gaming Mouse (B)
    • M305 Wireless Mouse
    • MX320/MX400 laser mouse. (B)
    • M505 USB wireless laser, model no: 910-001324 (B)
    • M-BJ79 (B)
    • M185 Wireless Mouse (B)
    • LX-700 Cordless Desktop Receiver (B)
    • Optical wheel mouse. (B)
    • MX518 Optical wheel mouse (B)
    • M210 (part of the MK260 set) (B)
    • M310 Cordless Mouse
    • M510 Wireless Mouse (B)
    • Performance Mouse MX (B)
  • Microsoft
    • Comfort Curve Mouse 3000 for Business
    • Comfort Mouse 6000
    • Compact optical mouse 500 V2.0 (B)
    • Wheel Optical Mouse (wheel and additional buttons not tested) (B)
    • Microsoft Intellimouse Optical Mouse
    • Microsoft Wireless Laser Mouse 8000
    • Microsoft Wireless Mobile Mouse 3500
    • Microsoft Wireless Mobile Mouse 4000
    • Microsoft Wireless Mouse 700 v2.0
  • Saitek
    • Notebook Optical Mouse (PM46)
  • Sun microsystems
    • Model: FID-638 , SunPN: 371-0788-01
  • Targus
    • AMU2701EUK (B)
  • Technika
    • TKOPTM2 (B)
    • TKD-211
  • Tesco
    • Wired optical mouse M211 (B)
  • Xenta
    • MOW0810 (B)
    • Multimedia Wireless Keyboard and Mouse Set (Mouse Model: HM-3301) (B)
  • Generic
    • Generic 2.4GHz Wireless Mouse (ID 040b:2013 Weltrend Semiconductor) (B)

Problem USB Mouse Devices

The following is a list of specific mouse devices that have problems working with the Raspberry Pi

  • Razer
    • Naga Wired USB mouse - the mouse seems to present itself as a keyboard because the numpad on the left-hand side of the device works but the cursor doesn't move.

USB WiFi Adapters

See also: http://www.element14.com/community/docs/DOC-44703/l/raspberry-pi-wifi-adapter-testing

There is a howto on installing the TL-WN722N adapter here, which also acts as a guide for installing others too.

Working USB Wifi Adapters

These adapters are known to work on the Raspberry Pi. This list is not exhaustive, other adapters may well work, but have not yet been tried.

Note: A WiFi adapter will probably need more power than the Raspberry Pi USB port can provide, especially if there is a large distance from the WiFi adapter to the WiFi Access Point. Therefore, you may need to plug the WiFi adapter into a powered USB hub.

  • 3COM
    • 3CRUSB10075: ZyDAS zd1211rw chipset (!)
  • Alfa
    • AWUS036NEH: Tested on Debian Squeeze (with Ralink firmware package)
  • Asus
    • USB-N10 USB ID 0b05:1786, r8712u staging driver, included on Fedora Remix & Arch, must download for Debian and install firmware-realtek from non-free squeeze repo (B)
    • USB-N13 USB ID 0b05:17ab, download compiled manufacturer driver for RTL8192CU per instructions (B)
    • WL-167G v1 USB ID 0b05:1706, Ralink RT2571 working out-of-the-box on Debian image from 2012-04-19. Requires powered hub, otherwise it is detected by OS but will not function.
  • Belkin
    • Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]. On Debian requires the firmware-ralink package from the non-free repository. The usbcore module needs to be added to /etc/modules install instructions.
    • Belkin Components F7D1101 v1 Basic Wireless Adapter [Realtek RTL8188SU] USB ID 050d:945a, r8712u staging driver, included on Fedora Remix & Arch, must download for Debian and install firmware-realtek from non-free squeeze repo (B)
  • BlueProton
    • BT3 USB ID: 0bda:8187; tested on Debian, Fedora & Arch; rtl8187 driver (B)
  • D-Link
    • AirPlus G DWL-G122 (rev. E). USB ID 07d1:3c0f, Ralink RT2870. On Debian requires the firmware-ralink package from the squeeze-firmware non-free repository.
    • DWA-140 (Version B1). USB ID 07d1:3c09, Ralink RT2870. On Debian requires the firmware-ralink package from the squeeze-firmware non-free repository.
    • DWA-160 (Version B1). USB ID 07d1:3c11, Ralink RT2870. On Debian requires the firmware-ralink package from the squeeze-firmware non-free repository.
  • edup
    • [Edup 150MBPS wifi adapter] USB ID: 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter. Driver is the RT2800USB module, I had to install the firmware as rt2870.bin in /lib/firmware.
    • edup nano EP-N8508 Use method shown here for debian. Powered directly from RPi (B)
  • EnGenius
    • EUB9603 EXT - Realtek r8712u driver
  • Gigabyte
    • Gigabyte GN-WB32L 802.11n USB WLAN Card. Works with the rt2800usb driver.
  • IOGear
    • GWU625 USB ID 0bda:8172, r8712u staging driver, included on Fedora Remix & Arch, must download for Debian and install firmware-realtek from non-free squeeze repo (B)
  • Micronet
    • Micronet SP907NS, 11N Wireless LAN USB Adapter (uses Realtek RTL8188CUS) works plugged directly into R-Pi USB (B) Debian installation instructions read this first, and Auto-install script. The script has been used to install other adapters using the RTL8188CUS chip. Updated driver that handles the latest rpi-updates that kill the original driver, download for manual installation, automatically installed by the Auto-install script.
  • Netgear
    • N150: Reported as WNA1100 device, uses the Atheros ar9271 chipset. On Debian, requires the firmware-atheros package from the squeeze-backports non-free repository (!)
    • WG111v2: Realtek rtl8187 chipset (!)
  • OvisLink
    • Evo-W300USB: USB ID 148f:2270 Ralink Technology RT2770. apt-get install firmware-ralink
  • Patriot Memory
    • PCUSBW1150 Wireless 11N USB adapter (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered usb hub.
    • PCBOWAU2-N Wireless 11N USB adapter (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module
  • Rosewill
    • RNX-N180UBE Wireless B/G/N Adapter
      • Realtek RTL8191SU chipset, USB-ID 0bda:8172
      • Tested in Arch, works out of box. USB hub required.
    • RNX-G1 Wireless B/G Adapter
      • Realtek RTL8187 chipset, USB-ID 0bda:8187
      • Tested in Arch, works out of box. USB hub required.
  • Sagem
    • Sagem Wireless USB stick XG-760N : USB ID 079b:0062, Module is not shipped in Debian image, but can be "sudo apt-get install zd1211-firmware"
  • Tenda
    • USB 11n adapter on a G network: Ralink 2870/3070 driver (!)
  • TP-Link
  • ZyXEL
    • NWD2105 USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)

Problem USB Wifi Adapters

These adapters were tested and found to have issues the Raspberry Pi. Note [4] as a possible solution/explanation for errors while running LXDE.

  • Realtek
    • RTL8188CUS USB-ID 0bda:8176, kernel oops in dmesg and freeze when pulled from USB. (B)
  • Trendnet
    • TEW-424UB USB ID: 0bda:8189; tested on Debian, Fedora & Arch; rtl8187 driver; errors with LXDE running (B)
  • TP-Link
    • TL-WN821N USB ID: 0cf3:7015; tested on Debian; requires htc_7010.fw firmware; ath9k_htc driver; errors with LXDE running (B)
    • TL-WN723N USB ID: 0bda:8176; tested on Arch without a powered hub; it seems to draw too much current.

USB Bluetooth adapters

  • Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) - (USB ID 0a12:0001)

USB Ethernet adapters

USB Sound Cards

You will usually want the alsa package for sound. In the Debian image for Raspberry Pi (and possibly other distributions) USB sound cards are prevented from loading as the first sound card, which can be an annoyance if it's the only device you have. To disable this behaviour edit /etc/modprobe.d/alsa-base.conf and comment out the last line; options snd-usb-audio index=-2

USB 3G Dongles

  • Huawei E220

USB IR Receivers

SMK Manufacturing, Inc. eHome Infrared Receiver (Works out of the box with OpenELEC)

USB TV Tuners and DVB devices

USB Webcam

  • Creative VF0470 Live! (works out of the box on ArchLinux)
  • Logitech
    • Logitech c270 (using external power)
    • Logitech, Inc. Webcam C200
  • Microsoft
    • Xbox Live Vision camera (045e:0294), powered by Raspi, working on Arch
  • Sony
    • PlayStation Eye (for PlayStation 3)
  • Trust 2MP Auto Focus Webcam (works out of the box on ArchLinux)

USB GPS devices

  • Royaltek
    • Royaltek RGM 2000 SiRF2 using the included serial (TTL) to USB - converter. That uses a Profilic pl2303-chip so you'll need to compile the module or the kernel manually
  • Garmin
  • Wintec
    • WBT-200: No problem on Debian

USB UART adapters

The USB UART adapter is used to access the serial console of the Raspberry Pi from a development host such as a laptop or desktop PC. The USB end connects to the PC and the UART header end connects to the USB. While it is possible to connect the USB end to another Raspberry Pi, this configuration has not been tested unless explicitly mentioned against an individual entry below.

Other, exotic USB devices

PS2 / AT to USB Converters

Tested PS2/AT keybords

All above tested with the famous "blue cube" on a powered USB hub.

  • IBM Model F (please note requires an aditonal AT to PS2 converter)
  • Dell AT101w
  • Northgate Ominikey Ultra T (please note requires an aditonal AT to PS2 converter)

more to come soon

  • 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller
    • Working: Ipex RT215KTW PS/2 keyboard
    • Not working: HP SK-2502 PS/2 keyboard (gets power but does not init - three LEDs remain permanently lit. Keyboard + Holtek converter work on a Linux PC, although this keyboard doesn't work with some native PS/2 ports.)

Power adapters

The Raspberry Pi uses a standard Micro USB (type B) power connector, which runs at 5v. Generally you can use a MicroUSB to USB cable and then either power the Raspberry Pi directly from your main computers USB ports (if they provide enough power), or by using a USB to Mains adaptor. A number of mobile phones use MicroUSB power cables, and these are compatible with the Raspberry Pi in most cases. Below is a list of power adaptors known to work.

Wired Adaptors

  • AlcaPower
    • 5V 2.5A Model AP5A - Charger/switching with 7 connectors(also Microusb)
  • Apple
    • 5V 2.1A USB charger for iPad2, model A1357
    • 5V 1.0A USB Charger for iPod
    • 5V 1.0A USB Charger for iPhone 4
  • Amazon
    • 5V 0.85A USB charger for Kindle
    • 5V 2A Mains to USB A adaptor, Branded "CostMad"
  • Belkin
    • 5V 2.6A 4 port Ultra-Slim Desktop hub (Model F4U040) (RPi running from USB Hub port)
    • 5V 2.5A 4 port USB Hub (Model F5U404) (RPi running from USB Hub port)
    • 5V 3.5A 7 port USB Hub (Model F5U706) (RPi running from USB Hub port)
  • Blackberry
    • Charger for Pearl Flip 8220, Bold 9600 (B)
    • 5V 0.7A Model PSM04R-0500CHW1(M), RIM Part Number HDW-17957-003 (B)
  • Dell
    • USB Hub integrated in Dell monitors (B)
  • Garmin
    • 5V 1A charger (Model: PSA105R-050Q) supplied with Garmin Edge 800 GPS. Requires a USB-A to MicroUSB-B cable. Belkin 6ft cable (F3U151B06) works.
  • HP
    • 5.3V 2A Charger for HP Touchpad (B)
  • HTC
    • 5V 1A TCP-300 USB phone charger (B)
    • 5V 1A TC E250 USB charger (HTC R/N: 79H00098-02M)
  • i-box (Philex Electronic Ltd)
    • 5V 1A USB charger, 1 USB socket, no USB lead supplied, Model: 76971HS/02 (available from ASDA and others in the UK) (B).
  • LG
    • 4.8V 1A Travel Adapter
    • 5.1V .7A Travel Adapter
  • Logic
    • 4 port USB Hub (Model LP4HUB10). (RPi running from USB Hub port, red power line (+5v) inside hub cut) (B)
  • Maplin Electronics
    • 5V 1A dual USB power supply, model number H25B-MT-K2
    • Micro USB Power Supply N19HX
  • Motorola
  • Nokia
    • 5V 1.2A AC-10E Charger
  • Noname
    • 5V 2.1A KMS-AC09 4 port USB charger (B) [5]
    • 5.2V 1A MW-3NU10GT - no cable, but this one works well (1m): [6]
  • Novatel Wireless
    • 5V 1.05A Charger, model number SSW-1811, packaged with Verizon Wireless MiFi device
  • Orange
    • 5V 0.7A Charger for Orange San Francisco
  • Palm
    • 5V 1A Charger for Palm Pixi+ (B)
  • Pantech
    • 5.0V 1A CNR USB with LG DLC100 micro usb cable
  • Samsung
    • 5V 0.7A Charger for Galaxy S model ETA0U10EBE
    • 5V 0.7A Charger for Galaxy SII
  • Sony Ericsson
    • 5V 0.7A Charger CST-80
  • Travel Charger
  • Technika
    • 5V 1A USB Power Adapter, model MPASS01 (B)
  • TruePower
    • U-Socket 5V 2.1A AC Receptacle with Built-in USB ports (2.1A per USB port) model ACE-7169

External Batteries

  • New Trent
    • iCurve IMP70D 7000mAh (Approx 12hrs from full charge)
  • Sinoele
    • Movpower - Power Bank 5200mAh (8hrs with Wifi active)
  • TeckNet
    • iEP392 Dual-Port 12000mAh External Power Bank (1A port, ~16.5 hours)
  • Energizer/XPAL
    • XP18000 18000mAh Power Pack
  • Anker Astro3
    • Anker Astro3 10000mAh with Dual 2A USB Output

Display adapters

While technically there shouldn't be a difference between one (for example) HDMI->DVI adapter and another, it would be nice to have a list of working ones so if necessary, you can just buy a recommended one (contributors should give links) instead of hunting around. This section could contain information about verified HDMI->DVI, CompositeRCA->SCART, CompositeRCA->VGA boxes/chipsets, and HDMI->VGA boxes/chipsets.

HDMI->DVI-D

A combination cable of a short HDMI cable & HDMI/DVI converter from Kenable worked. The parts used are 1 x PSG02582 and 1 x C-HDMI-1.5-LC

The HDMI to DVI-D cable provided by Apple with the 2010 Mac Mini worked. It does not appear this adapter can be purchased separately.

AnyWare Cables HDMI -> DVI cable perfectly functional

HDMI->VGA converter boxes

Note that the RPi_config.txt file will have to be edited if the converter or VGA monitor does not support 1080p resolution, this is because the Rpi cannot detect the resolution. initially setting to VGA resolution is probably best

Also note that hdmi_force_hotplug may have to be enabled.

According to user "asb" -- http://www.amazon.co.uk/gp/product/B007KEIRNG -- the Neewer HDMI to VGA adapter works with the Pi.

This adapter (from Kanaan) -- http://www.amazon.co.uk/KanaaN-Adapter-Converter-Cable-Resolutions/dp/B007QT0NNW -- is working. Quality not wonderful, but certainly usable, on 1400x900 monitor.

According to user "na1pir" -- [original eBay sale posted by "na1pir" closed. Updated seller link from user "bondo" is] http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=130699741793#ht_2343wt_704

This adapter -- http://www.ebay.co.uk/itm/300692770623 -- works from 640x480 up to 1920x1080, audio over HDMI works too. Sadly the IC's on the PCB have all been scrubbed. Requires HDMI boost and overscan, config.txt settings for 640x480@60Hz:
hdmi_drive=2
hdmi_group=2
hdmi_mode=4
config_hdmi_boost=4
overscan_top=-30
overscan_bottom=-30
overscan_left=-30
overscan_right=-30

According to user "Mortimer" -- HDFuryPro HDMI to YPbBr/VGA Converter found on Amazon -- http://www.amazon.co.uk/Inputs-Component-Video-YPbPr-Converter/dp/B00797ZZ4S/ -- Works with Raspberry Pi. Tested against a Philips 170B 1280x1024 LCD monitor, producing a full native resolution image. Not tested against a Component Video TV yet, and audio has yet to be got working. The config.txt settings used are:
hdmi_drive=2
hdmi_group=2
hdmi_mode=36
disable_overscan=1

Composite->SCART

None explicitly mentioned

Composite->VGA converter boxes

None explicitly mentioned, and they are pricey so the chances of someone buying one to test functionality is low

SD cards

Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.) For this reason, please specify product numbers in the lists below, when possible.

Working SD Cards

  • Adata
    • 8GB SDHC Class 2 (MMB3F08GWMCA-GE)
    • 8GB SDHC Class 4 (MicroSD w/ adapter)
    • 8GB SDHC Class 6 (MMAGR08GUDCA-DB)
    • 8GB SDHC Class 10 (AUSDH8GCL10-R)
    • 16GB SDHC Class 6
    • 16GB SDHC Class 10 (16GSDHC10)
  • AmazonBasics
  • Apacer
    • 8GB microSDHC Class 10 (with adapter)
  • CnMemory
    • 8GB SDHC Class 4 (Silver/Black label says 'High Capacity Card') 84209_8GB_SDHC, bought from Maplins. No error messages seen, but operation is much slower than with a SanDisk 4GB Class 4 card.
  • Dane-Elec
    • 16GB SDHC Class 4
  • Duracell
    • 4GB SDHC Class 4
    • 16GB SDHC Class 10 (labelled Pro Photo 200x)
  • Extrememory
    • 16GB SDHC Class 10
    • 32GB SDHC Class 10
  • Hama
    • 8GB SDHC High Speed Pro Class 6
  • Hema (Dutch dept. store)
    • 8GB SDHC Class 4
  • Goodram
    • 8GB microSDHC Class 4
  • HP
    • 8GB SDHC Class 4 (doesn't reboot during first time startup process, but restart again and fine after that).
  • ICIDU
    • 8GB microSDHC Class 10
    • 16GB SDHC Class 10 (image write had issues, might be my inexperience. It boots & shows Xserver)
  • Integral
    • 4GB SDHC Ultima Pro Class 10
    • 8GB SDHC Ultima Pro Class 6 (Works - initial error -110 but boots within 5 seconds with no further errors or issues)
    • 8GB SDHC Ultima Pro Class 10 (20MB/s) (Works - initial error -110 but boots within 5 seconds with no further errors or issues)
    • 16GB SDHC Class 10 Ultima Pro (20MB/s)
  • Joyflash
    • 16GB SDHC Class 10 (LTSD1112016GB)
  • Kingmax
    • 4GB SDHC Class 2
    • 4GB microSDHC Class 4 (KM04GMCSDHC4) won`t reboot when it`s hot
  • Kingston
    • 2GB SD
    • 4GB microSD Class 4
    • 4GB SDHC Class 4 (SD4/4GB)
    • 8GB SDHC Class 4 (SD4/8GB) (does not work with current build of raspbmc)
    • 8GB microSDHC Class 4 (SDC4/8GB)
    • 8GB SDHC Class 6 (SD6/8GB) (errors on boot, but works fine)
    • 8GB SDHC Class 10 (SD10G2/8GB, SD10V/8GB, ultimateX 100X, ultimateX 120X)
    • 16GB SDHC Class 4 (SD4/16GB)
    • 16GB microSDHC Class 10 (SDC10/16GB)
    • 16GB SDHC Class 10 (SD10G2/16GB, ultimateX 100X)
    • 16GB SDHC Class 10 (SD4/16GBET)
    • 32GB SDHC Class 10 (SD10G2/32GB, ultimateX 100X)
  • Kodak
    • 4GB SDHC Class 2
    • 8GB SDHC Class 4
  • Kruidvat
    • 8GB SDHC Class 4
  • Lexar
    • 4GB SDHC Class 4 (Boots consistently and no error messages in log after 1/2 hour use ) (works with Raspbmc)
    • 4GB SDHC Class 6 Platinum II (from Microcenter)
    • 8GB SDHC Class 4
    • 8GB SDHC Class 6 Platinum II
    • 16GB SDHC Class 6 Platinum II
  • Microcenter Brand (sold in bins at checkout)
  • Mushkin
    • 32GB SDHC Class 10 (MKNSDHCC10-32GB) [7]
  • Mustang
  • MyMemory
  • Optima
    • 8GB SDHC Class 10 (Pro-Speed)
  • Panasonic
  • Patriot
    • 8GB SDHC Class 6 (PSF8GSDHC10-PC)
    • 8GB SDHC Class 10 LX Series (PSF8GSDHC10-PC1)
    • 16GB SDHC Class 10 (PSF16GMCSDHC10)
    • 16GB microSDHC Class 10 (PSF16GMSHC10) (requires recent kernel update for boot)
    • 32GB SDHC Class 10 (PSF32GSDHC10)
  • Peak
    • 4GB microSDHC Class 4 (MMBTR04GUBCA-ME) tested with Arch
  • Play.com
    • 4GB SDHC Class 6 (S4E3CD04GEFAA 0907090121106)
  • PNY
    • 4GB SDHC Class 4
    • 4GB SDHC Class 4 Optima (SD-K04G 0834TT1297Y)
    • 8GB SDHC Class 6
    • 16GB SDHC Class 4
    • 16GB SDHC Class 10 (P-SDHC16G10-GE)
  • Samsung
    • 4GB SDHC
    • 8GB SDHC Class 6 (MB-SS8GAEU)
    • 8GB SDHC Class 10 (MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM)
    • 16GB SDHC Class 6 (MB-SSAGAEU)
    • 16GB SDHC Class 10 (MB-SPAGA aka MB-SPAGAEU)
    • 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) fine with Debian Wheezy, but does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt).
  • SanDisk
    • 2GB SD, white "SanDisk for Wii" branded, no class mentioned
    • 2GB SD (with a circle 2 --probably class 2), writes at 3.5 Mb/s
    • 2GB SD Class 2 (BE0816113150D)
    • 2GB SD Class 4 Ultra (15MB/s)
    • 2GB SD Class 4 Ultra II
    • 2GB SD Extreme III (BE0715105083B)
    • 4GB SDHC Class 4 (SDSDB-004G-B35)
    • 4GB SDHC Class 4 Ultra (SDSDH-004G-U46) won`t reboot when it`s hot
    • 4GB SDHC Class 4 Ultra II
    • 4GB SDHC Class 6 Ultra (30MB/s BH1200421822D)
    • 4GB SDHC Class 6 Ultra (SDSDH-004G-U46 - BH1136121837G, BH1130521822D)
    • 4GB SDHC Class 10 Extreme (BH10297143382G)
    • 8GB SDHC Class 4 (writes at ~1.5MB/s)
    • 8GB SDHC Class 4 Ultra labelled as 15MB/s (BI1024716014G)
    • 8GB SDHC Class 6 Ultra
      • except SDSDH-008G-U46 - BI1131222083D could be problematic, see below
      • except SDSRH-008G-A11 could be problematic, see below
    • 8GB SDHC Class 6 Ultra labelled as 20MB/s (BI11321422083D)
    • 8GB SDHC Class 10 Extreme (BI11017514367G)
    • 8GB SDHC Class 10 Ultra(30MB/s) (SDSDU-008G-U46) - Work with stock debian6-19-04-2012 image but not with OpenELEC r11212
    • 16GB SDHC Class 4
    • 16GB SDHC Class 10 Ultra(30MB/s) (SDSDU-016G-U46) - Work with stock debian6-19-04-2012 image
    • 32GB SDHC Class 10 Ultra (30MB/s) - Works with stock debian6-19-04-2012 image
    • 16GB SDHC Class 10 Extreme (45MB/s U1) (BL1203322025G) - Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel
    • 16GB SDHC Class 10 Extreme Pro (95MB/s UHS-I) (SDSDXPA-016G-A75) - Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel
    • 32GB SDHC Class 4
    • 32GB SDHC Class 6
    • 32GB SDHC Class 10 Extreme (45MB/s UHS-I) (SDSDX-032G-X46) - works with arch-04-29-image and latest firmware (booting problems without firmware update)
    • 4GB microSDHC Class 2
    • 4GB microSDHC Class 4
    • 8GB microSDHC Class 2
    • 8GB microSDHC Class 4
    • 8GB microSDHC Class 6 Mobile Ultra (SDSDQY-008G-U46A) working with the latest firmware, won`t reboot when it`s hot
    • 64GB microSDXC Class 6 Mobile Ultra (SDSDQY-064G-A11A) (boots up much more consistently with latest firmware)
  • Silicon Power
    • 4GB microSDHC Class 6 (SP004GBSTH006V10-SP)
    • 16GB microSDHC Class 10 (SP016GBSDH010V10)
  • Sony
    • 4GB SDHC Class 4 (SF-4B4) (Write 6MB/s, Read 20MB/s)
    • 4GB SDHC Class 4 (SF-4N4)
    • 32GB SDHC Class 10 (SF-32NX/TQ) (Max read speed of ~94MB/s, min write speed of ~10MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012)
  • TakeMS
  • TDK
    • 4GB SDHC Class 4 (1008WW5261B)
    • 4GB SDHC Class 4 (80-56-10275-004G,Debian works BUT mmc0 errors when booting Fedora)
    • 4GB microSDHC Class 4 (80-56-10301-004G)
  • Toshiba
    • 8GB mircoSDHC SD-C08GJ(BL3A
  • Transcend
    • 2GB MicroSD (MMAGR02GUECA-MB)
    • 4GB SDHC Class 4 - we've found these to work without any errors and offer reasonable performance
    • 4GB SDHC Class 4 (TS4GSDHC4 - BH1130821915G)
    • 4GB SDHC Class 6 (TS4GSDHC6) - no problems. (does not work with Raspbmc as of 6/1/12)
    • 4GB SDHC Class 10 (TS4GSDHC10E)
    • 8GB SDHC Class 4
    • 8GB SDHC Class 6 (~5.8 MB/s read/write following RPi_Performance#SD_card)
    • 8GB SDHC Class 6 (TS8GSDHC6-P2 - MMBFG08GWACA-M6)
    • 8GB SDHC Class 10 (TS8GSDHC10) Transcend 8G class 10
    • 16GB SDHC Class 6 (TS16GSDHC6)
    • 16GB SDHC Class 10 (TS16GSDHC10)
    • 32GB SDHC Class 10 (TS32GSDHC10)(TS32GSDHC10E)


Known good (and pre-loaded) cards will be available for sale from RS and element14 at a later date (TBA).

Problem SD Cards

There are issues with most Class 10 SDHC cards, apparently due to a bug in the Broadcom bootloader.[9]

This seems to have been fixed in sdhci.c: [10] Further feedback will be useful.

If you add an SD card here, please also mention the kernel date and the date you tried it. This allows people to estimate how likely it is that a driver-fix in the kernel has been fixed. (i.e. I think some/most of the cards here work fine now, because a problem in the kernel driver has been fixed).

  • Acumem
    • 8GB SDHC Class 6 (many errors on 6/7/2012)
  • Adata
    • 8GB SDHC Class 6 - Sometimes boots
    • 16GB SDHC Class 6 (Possibly SD5MY168G0, label with gold <> black gradient) - Doesn't boot
  • Amazon Basics
    • 16GB SDHC Class 10 (many errors on 6/7/2012)
  • Delkin Devices
    • 4GB SDHC Class 6 "Delkin pro" -- Note: works with Fedora Beefy Miracle 17
  • GSkill
    • 32GB SDHC Class 10
  • Integral
    • 16GB SDHC Class 6 Ultima Pro (SH016GAA2BB)
    • 4GB SDHC class 4 (S404G1115)
  • Kingston
    • 2GB SD looks like this - boots the kernel, but damages the filesystem.
    • 4GB SDHC Class 6 - Boots kernel but won't run init (times out)
  • Memory2GO
    • 4GB SDHC Class 6 (S404G1029) - I/O Errors leading to Kernel Panic on startup.
  • Micro Center
    • 4GB SDHC Class 4 — hasn't worked with any of the images I've tried; appears to be completely unrecognized
  • MyMemory.com
    • 8GB SDHC Class 10
  • Panasonic
  • Patriot
    • 8GB SDHC Class 10 (PSF8GSDHC10)
  • PNY
    • 8GB Optima SDHC 120 HD Class 4 SD-K08G 0928 WF3673 - mmc -110 errors at init time on 6/12/12
    • 32GB SDHC Class 10 Professional (P-SDHC32G10-EF) from play.com (mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)
  • Samsung
    • 32GB SDHC Class 10 (MB-SSBGA, MBSSBGVEOBGA-SH) does not work with Debian Squeeze (debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt), but works fine with Debian Wheezy
  • SanDisk
    • 4GB SDHC Class 2 - Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt.
    • 4GB SDHC Class 2 "Limited Edition" (8H825413279G) - Error -110 whilst initialising sd card
    • 4GB SDHC Class 4 (BH1030216016G) - Doesn't boot.
    • 4GB SDHC Class 4 (BH1031116016G) - Doesn't boot.
    • 4GB SDHC Class 6 Extreme (BH0822411730D)
    • 4GB SDHC Class 6 Extreme III (30 MB/s) (BH0822712362G)
    • 4GB SDHC Class 10 Extreme (30 MB/s HD Video) (Doesn't boot) - Works with new kernel.img and start.elf [11]
    • 4GB microSDHC Class 6 Mobile Ultra (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found
    • 8GB SDHC Class 6 Ultra (B11201421964G)
    • 8GB SDHC Class 6 Ultra (SDSDH-008G-U46 - BI1131222083D) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )
    • 8GB SDHC Class 6 Ultra labelled as 30MB/s (BI1208721965G)) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )
    • 8GB SDHC Class 6 Ultra labelled as 30MB/s SDSRH-008G-A11 - Boots kernel but won't run init ( mmc timeout waiting for interrupt )
    • 8GB SDHC Class 6 Ultra I (BI1201221964G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )
    • 8GB SDHC Class 6 Extreme (BI1101116253G)
    • 8GB SDHC Class 10 Extreme (BI1108716254G) / (B11209116254G)
    • 8GB SDHC Class 10 Extreme (BI1201516254G) [amazon.co.uk]+amazon.fr
    • 8GB SDHC Class 10 Extreme (BI1200916252D/SDSDX-008G-X46) - Doesn't boot. Tried (6th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github
    • 8GB SDHC Class 10 Extreme Pro- Works with updated kernel/firmware, stock debian6-19-04-2012 boots kernel but won't run init ( mmc timeout waiting for interrupt )
    • 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Doesn't boot with debian6-19-04-2012.img.
    • 16GB SDHC Class 6 Ultra (BL1202021933G)
    • 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt )
  • TDK
    • 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new kernel.img and start.elf [12] but still won't run init.
    • 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried (4th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github [13] but still got 'Error -84' and 'Kernel panic - not syncing: No init found'
  • Veho
    • 4GB SDHC Class 6

The usual warnings against less reputable sellers (such as Ebay merchants) apply.


Note that the following error is sometimes accompanied with a non-working SD card after booting (on Debian):

mmc0: timeout waiting for hardware interrupt

Benchmarks

Foreign Language Translations

References