Difference between revisions of "RPi cmdline.txt"
m (ip parameter & formatting) |
|||
Line 13: | Line 13: | ||
*rootwait | *rootwait | ||
− | + | Some common options: | |
*dwc_otg.speed=1 | *dwc_otg.speed=1 | ||
− | + | ::USB v1 speed | |
*smsc95xx.turbo_mode=N | *smsc95xx.turbo_mode=N | ||
− | + | ::if the raspberrypi freezes after filling the log withe kevent dropped. | |
*dwc_otg.microframe_schedule=1 | *dwc_otg.microframe_schedule=1 | ||
*console=ttyAMA0,115200 | *console=ttyAMA0,115200 | ||
*usbhid.mousepoll=8 | *usbhid.mousepoll=8 | ||
− | *[http:// | + | *ip=192.168.0.10 |
+ | ::static ip (as seen [http://pihw.wordpress.com/guides/direct-network-connection/in-a-nut-shell-direct-network-connection/ here]) | ||
+ | *[[RPI_BCM2708_Parameters#module:_sdhci-bcm2708|more]] | ||
{{Template: Raspberry Pi}} | {{Template: Raspberry Pi}} |
Revision as of 08:17, 24 July 2014
This file is for passing arguments to the Linux kernel and it can be found in /boot/
Default options:
- dwc_otg.lpm_enable=0
- console=ttyAMA0,115200
- kgdboc=ttyAMA0,115200
- console=tty1
- root=/dev/mmcblk0p2
- rootfstype=ext4
- elevator=deadline
- rootwait
Some common options:
- dwc_otg.speed=1
- USB v1 speed
- smsc95xx.turbo_mode=N
- if the raspberrypi freezes after filling the log withe kevent dropped.
- dwc_otg.microframe_schedule=1
- console=ttyAMA0,115200
- usbhid.mousepoll=8
- ip=192.168.0.10
- static ip (as seen here)
|