Difference between revisions of "RaspberryPi Boards"

From eLinux.org
Jump to: navigation, search
m (Hardware versions/revisions: New board)
(34 intermediate revisions by 11 users not shown)
Line 7: Line 7:
  
 
Note: For '''Board ver.''' we used: <model><RAM Maker><production date> (ex.: BS1218 is "Model B, Samsung RAM, 18th week of 2012")
 
Note: For '''Board ver.''' we used: <model><RAM Maker><production date> (ex.: BS1218 is "Model B, Samsung RAM, 18th week of 2012")
       Look for the date of manufacturing printed with the year and week. In this example year (2012) and week (18th):[[File:Date_of_manufacturing.jpg|200px|thumb|right]]
+
       Look for the date of manufacturing printed with the year and week (back side, board edge near LAN connector). In this example year (2012) and week (18th):[[File:Date_of_manufacturing.jpg|200px|thumb|right]]
  
  
Line 175: Line 175:
 
| Farnell
 
| Farnell
 
| JakeBlues
 
| JakeBlues
 +
|-
 +
 +
| BH1208
 +
| Hynix <pre>
 +
H9TKNNN2GDMP
 +
LANDM 149A
 +
</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1134-A1B17
 +
8R147769B
 +
STA-SG
 +
</pre>
 +
| <pre>220
 +
16V
 +
EE2</pre>
 +
| 14
 +
| <pre>
 +
SE8117T33
 +
1001-LF</pre>
 +
|
 +
* No issues after getting a good power supply
 +
* Note the SMSC is 8R149482C which I suspect is the same for the others.
 +
* Ethernet: LU1S041ALF 1018M
 +
| [[File:RaspberryPi-BS1208-Front-MarkBeckett.JPG|100px|thumb|center]]
 +
| [[File:RaspberryPi-BS1208-Back-MarkBeckett.JPG|100px|thumb|center]]
 +
| Farnell
 +
| MarkBeckett
 +
|-
 +
 +
| BH1219
 +
| Hynix <pre>
 +
H9TKNNN2GDMP
 +
LANDM 218A
 +
</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1206-A1B17
 +
8R149471A
 +
CTI-TW
 +
</pre>
 +
| <pre>220
 +
16V
 +
2E2</pre>
 +
| T014
 +
| <pre>
 +
SE8117T33
 +
1217-LF</pre>
 +
|
 +
* No issues
 +
* Ethernet: HanRun HR901110A 1220
 +
| [[File:RaspberryPI_1219_RS_Pi_1_MCB1.JPG|100px|thumb|center]]
 +
| [[File:RaspberryPI_1219_RS_Pi_2_MCB1.JPG|100px|thumb|center]]
 +
| RS
 +
| MarkBeckett
 
|-
 
|-
 
| BH1218
 
| BH1218
Line 453: Line 508:
 
| RS
 
| RS
 
| Mortimer
 
| Mortimer
 +
|-
 +
| BH1218
 +
| Hynix
 +
<pre>
 +
H9TKNNN2GDMP
 +
LRNOM 217A
 +
</pre>
 +
| SMSC
 +
<pre>
 +
LAN9512-JZX
 +
B1215-A1B17
 +
8R150188B
 +
ASE-TW (e3)
 +
</pre>
 +
| <pre>2E
 +
22-
 +
16H</pre>
 +
| 14
 +
? / ?
 +
| <pre>SE8117T33
 +
1213-LF</pre>
 +
|
 +
* D1 shorted when attaching a Neewer HDMI to VGA adapter. The adapter has had no other tests and the raspberry pi's HDMI output has not been connected to any other devices before or since.
 +
| [[File:RaspberryPi-BH1218-Front-Tom1989.jpg|100px|thumb|center]]
 +
| [[File:RaspberryPi-BH1218-Back-Tom1989.jpg|100px|thumb|center]]
 +
| RS
 +
| Tom1989
 
|-
 
|-
 
| BH1208
 
| BH1208
Line 546: Line 628:
 
| Farnell
 
| Farnell
 
| Davidm870
 
| Davidm870
|}
+
|-
 +
| BS1219
 +
| Samsung <pre>216
 +
K4P2G324ED-AGC1
 +
GAL0859V</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1216-A1B17
 +
8R149482C
 +
ASE-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| T014
 +
2.9ohm / 3.0ohm
 +
| <pre>SE8117T33
 +
0941-LF</pre>
 +
|
 +
* First had problems (freezing, no LAN, etc.) due to low quality power supply - cheap ebay adaptor. Solved with own [[RPi_5V_PSU_construction| PSU construction]] with 7805 stabiliser adjusted to 5.25V. Now works OK with Raspbian “wheezy”, but not yet tested extensively.
 +
* Ethernet: HR901110A 1220
 +
* F3 0.3ohm
 +
| [[File:RPi-BS1219-Front_Pinoccio.jpg|100px|thumb|center]]
 +
| [[File:RPi-BS1219-Back_Pinoccio.jpg|100px|thumb|center]]
 +
| Farnell
 +
| [[User:Pinoccio|Pinoccio]]
 +
|-
 +
| BS1219
 +
| Samsung <pre>216
 +
K4P2G324ED-AGC1
 +
GAL0859D</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1216-A1B17
 +
8R149482C
 +
ASE-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| T014 / T014
 +
? / ?
 +
| <pre>SE8117T33
 +
0941-LF</pre>
 +
|
 +
* No issues
 +
* Ethernet: HanRun HR901110A 1220
 +
* FN120659744
 +
| [[File:RPi-BS1219-Front_slabua.jpg|100px|thumb|center]]
 +
| [[File:RPi-BS1219-Back_slabua.jpg|100px|thumb|center]]
 +
| Farnell
 +
| [SLB] [http://twitter.com/slabua @slabua]
 +
|-
 +
| BH1222
 +
| Hynix <pre>H9TKNNN2GDMP
 +
LANDM 214A</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1215-A1B17
 +
8R148168E
 +
ASE-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| T014 / T014
 +
? / ?
 +
| <pre>SE8117T33
 +
1217-LF</pre>
 +
|
 +
* No issues
 +
* Ethernet: HanRun HR901110A 1225
 +
* E2712RSV1.0B1.1
 +
| [[File:RPi-BH1222-Front_slabua.jpg|100px|thumb|center]]
 +
| [[File:RPi-BH1222-Back_slabua.jpg|100px|thumb|center]]
 +
| RS
 +
| [SLB] [http://twitter.com/slabua @slabua]
 +
|-
 +
| BS1224
 +
| Samsung <pre>222
 +
K4P2G324ED-AGC1
 +
GAA0419T</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1222-A1B17
 +
8R150543C
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| T014 / T014
 +
? / ?
 +
| <pre>SE8117T33
 +
1217-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1225
 +
|
 +
|
 +
| Farnell
 +
| accumulator
 +
|-
 +
| BS1224
 +
| Samsung <pre>222
 +
K4P2G324ED-AGC1
 +
GAA0519H</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1223-A1B17
 +
8R15D81DA
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| 0000 / 0000
 +
0 / 0
 +
| <pre>SE8117T33
 +
1220-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1225
 +
* No Issues
 +
* Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
 +
| [[File:RPi-BS1224-Front_Shuckle.jpg|100px|thumb|center]]
 +
|
 +
| Farnell
 +
| shuckle
 +
|-
 +
| BS1218
 +
| Samsung<pre>216
 +
K4P26324ED-AGC1
 +
GAL0839R</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1215-A1B17
 +
8R150188B
 +
ASE-TW
 +
(e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| F014
 +
? / ?
 +
| <pre>SE8117T33
 +
1213-LF</pre>
 +
|
 +
* None
 +
|
 +
|
 +
| Farnell
 +
| d4lamar
 +
|-
 +
| BS1222
 +
| Samsung <pre>225
 +
K4P2G324ED-AGC1
 +
GAC0289E</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1227-A1B17
 +
8R1511968
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| 0000 / 0000
 +
0 / 0
 +
| <pre>SE8117T33
 +
1217-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1228
 +
* Both boards by wcfields ordered at the same time/date.
 +
* Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
 +
|
 +
|
 +
| MCM
 +
| wcfields
 +
|-
 +
| BS1232
 +
| Samsung <pre>225
 +
K4P2G324ED-AGC1
 +
GAC0289H</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1227-A1B17
 +
8R151261A
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| 0000 / 0000
 +
0 / 0
 +
| <pre>SE8117T33
 +
1225-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1228
 +
* Both boards by wcfields ordered at the same time/date.
 +
* Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
 +
|
 +
|
 +
| MCM
 +
| wcfields
 +
|-
 +
| BS1228
 +
| Samsung <pre>234
 +
K4P2G324ED-AGC1
 +
GAK1229X</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1228-A1B17
 +
8R151303B
 +
CTI-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H</pre>
 +
| 0000 / 0000
 +
? / ?
 +
| <pre>SE8117T33
 +
1220-LF</pre>
 +
|
 +
  * Serious problems with the 4GB SDHC-Card ordered with the board on initial testing with Gentoo (corrupted FS)
 +
  * Same issues using rasbian and two different supported SD cards
 +
  * Using RS original power adapter
 +
|
 +
|
 +
| RC
 +
| FKlama
 +
|-
 +
| BS1233
 +
| Samsung <pre>231
 +
K4P4G324EB-AGC1
 +
GKG0609V
 +
(512MB version)</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1227-A1B17
 +
8R151261A
 +
CTI-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
CFP
 +
2G6</pre>
 +
| None / None
 +
? / ?
 +
| <pre>17-33G
 +
RRB32 (ON)</pre>
 +
|
 +
-Ethernet Jack: No visible branding
 +
-PS: 500mA Mobile phone charger & USB Port on Laptop and Desktop (These are all I had)
 +
-Fuse(s): ONLY seems to have green polyswitch (F3) on bottom side of board F1 and F2 don't exist
 +
-In the position of the (other fuses) there is a mounting hole, likewise there is also a mounting hole under the Raspberry Pi Logo.
 +
 
 +
-There is also an extra header (P5) defined on the bottom side of the PCB near P1 (which is on the top side)
 +
-Won't boot with a known working (This same card will boot on BS1215 ) Kingston 4GB Class 4 SD Card, Raspbian "wheezy" 2012-09-18
 +
-The unit WILL boot from the SD card bought from Element 14.
 +
-Will add more when I know more.
 +
|
 +
|
 +
| Farnell/Element14 (AU)
 +
| TheSteveB
 +
|-
 +
| BS1236
 +
| Samsung <pre>225
 +
K4P46324EB-AGC1
 +
GKEM509X
 +
(512MB version)</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1232-A1B17
 +
8R151680A
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H</pre>
 +
| None / None
 +
? / ?
 +
| <pre>SE8117T33
 +
1225-LF</pre>
 +
|
 +
*Ethernet Jack: HanRun HT901110A 1228
 +
*Seems to randomly power off on 3 different PS's (650mA, 900mA and 1A) (http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=22353)
 +
*Extra header, F1, F2 and F3 and mounting holes just like BS1233
 +
|
 +
|
 +
|RS
 +
|Yaron
 +
|-
 +
}

Revision as of 21:25, 7 November 2012

Hardware versions/revisions

Several different boards have been found probably from different assembly lines, and the following table tries to help you identify your board for better troubleshooting. These differences are being debated on raspberrypi.org on this thread [1]

For what we can see for model B boards there are mainly two versions that differ on the type RAM used, Samsung (S) and Hynix (H).


Note: For Board ver. we used: <model><RAM Maker><production date> (ex.: BS1218 is "Model B, Samsung RAM, 18th week of 2012")

Look for the date of manufacturing printed with the year and week (back side, board edge near LAN connector). In this example year (2012) and week (18th):
Date of manufacturing.jpg



Model A:

Board

ver.

RAM

Chip

USB

Chip

C6 F1 / F2

Ref. & Ohm

RG2 Reported issues / Feedback Front Back Seen from Owner
Ayxxxx


Model B:

}
Board

ver.

RAM

Chip

USB

Chip

C6 F1 / F2

Ref. & Ohm

RG2 Reported issues / Feedback Front Back Seen from Owner
BS1215 Samsung SMSC
220
16V
EEZ
 ?

? / ?

  • None
Farnell SN
BS1215 Samsung SMSC
n2
220
UD
 ?

? / ?

  • None
Farnell SN
BS1215 Samsung
216
K4P2G324ED-AGC1
GA30419V
SMSC
LAN9512-JZX
B1211-A1B17
BR149884A
CTI-TW
n2
220C
UD
14

? / ?

SE8117733
943-1F
  • None
Farnell AndrewS
BS1218 Samsung
216
K4P26324ED-AGC1
GAL0839V
SMSC
LAN9512-JZX
B1212-A1B17
BR149884S
220
16V
EE5
T014

3.8 / 4.4

SE8117T33
1213-LF
  • None
RaspberryPi-Board A-Front.JPG
RaspberryPi-Board A-Back.JPG
Farnell marcoalexcampos
BS1218 Samsung
216
K4P26324ED-AGC1
GAJ0419C
SMSC
LAN9512-JZX
B1212-A1B17
BR149884S
220
16V
EE5
T014

5.8 / 3.9

SE8117T33
1213-LF
  • None
Antijn raspi farnell top.jpg
Antijn raspi farnell bot.jpg
Farnell antijn
BS1218 Samsung  ?

 ?

? / ?

  • None
RaspberryPi-BS1218-Front-JakeBlues.jpg
RaspberryPi-BS1218-Back-JakeBlues.jpg
Farnell JakeBlues
BH1208 Hynix
H9TKNNN2GDMP
LANDM 149A
SMSC
LAN9512-JZX
B1134-A1B17
8R147769B
STA-SG
220
16V
EE2
14
SE8117T33
1001-LF
  • No issues after getting a good power supply
  • Note the SMSC is 8R149482C which I suspect is the same for the others.
  • Ethernet: LU1S041ALF 1018M
RaspberryPi-BS1208-Front-MarkBeckett.JPG
Error creating thumbnail: Invalid thumbnail parameters
Farnell MarkBeckett
BH1219 Hynix
H9TKNNN2GDMP
LANDM 218A
SMSC
LAN9512-JZX
B1206-A1B17
8R149471A
CTI-TW
220
16V
2E2
T014
SE8117T33
1217-LF
  • No issues
  • Ethernet: HanRun HR901110A 1220
RaspberryPI 1219 RS Pi 1 MCB1.JPG
RaspberryPI 1219 RS Pi 2 MCB1.JPG
RS MarkBeckett
BH1218 Hynix
H9TKNNN2GDMP
LRNOM 217A
SMSC
LAN9512-JZX
B1215-A1B17
BR1501888
2E
220
16H
14

6.4 / 5.0

SE8117T33
1213-LF
  • USB/Keyboard/LAN issues
Antijn raspi RS top.jpg
Antijn raspi RS bot.jpg
RS antijn
BH1218 Hynix
H9TKNNN2GDMP
LRNDM 217A
SMSC
LAN9512-JZX
B1215-A1817
BR1494828
2E
220
16H
14

6.1 / 5.6

SE8117T33
1213-LF
  • "I haven't had any issues"[2]
  • Ethernet HR901110A 1211
  • E2112RSV1.0B1.1
RS dukla2000
BS1219 Samsung SMSC
2E
220
16H
T014

? / ?

SE8117T33
1213-LF
  • None
RaspberryPi-A1219-Front.jpg
RaspberryPi-A1219-Back.jpg
Farnell Troublesome
BH1208 Hynix SMSC
220
16V
EE2
14

? / ?

 ?
  • None
Raspberry-pi-top.jpg
Raspberry-pi-bottom.jpg
Farnell selsinork
BH1213 Hynix SMSC
n2
220c
UD
14

? / ?

<blank>
  • None
RaspberryPi-Board C-Front.jpg
RaspberryPi-Board C-Back.jpg
RS
BH1213 Hynix
h9tknnn2c0mp
landm 1494
SMSC
lan9512-jzx
b1134 a1b17 8r14
77698
sta-sg
n2
220c
UD
14

? / ?

<blank>
  • "pretty stable"
RaspberryPi-B1213-Front-RaTTuS.jpg
RaspberryPi-B1213-Back-RaTTuS.jpg
Farnell RaTTuS
BS12xx Samsung
216 k4p
26324ED
agc1
SMSC
lan9512-jzx 
b1212 a1b17 
br149884b 
cti-tw
220
16V
EE5
 ?

? / ?

  • OK "has not been stress tested yet"
Farnell RaTTuS
BH1218 Hynix
h9trnnn2g0mp
lrndm 217a
SMSC
lan9512-jzy
b1215-a1b17
ase-tw
2e
220
16h
14

? / ?

Se8117t33
12-13 cf
  • "stable good runner overclocked to 900mhz"
RaspberryPi-B1218-Front-RaTTuS.jpg
RaspberryPi-B1218-Back-RaTTuS.jpg
RS RaTTuS
BH1218 Hynix SMSC
LAN9512-JZX
B1215-A1B17
BR150188A
ASE-TW (e3)
2E
220
16H
14

8.2 / 5.9

SE8117T33
1213-LF
  • USB/Keyboard/LAN power down[3]
RaspberryPi-Board B-Front.JPG
RaspberryPi-Board B-Back.JPG
RS marcoalexcampos
BH1218 Hynix SMSC
2B
220
16H
 ?

6-7 / 6-7

  • None
RS SN
BH1218 Hynix SMSC
2B
220
16H
 ?

? / ?

  • None
RS
BH1218 Hynix SMSC
2E
220
16H
F014

? / ?

SE8117T33
1213-LF
  • None
RaspberryPi-B1218-Front.jpg
RaspberryPi-B1218-Back.jpg
RS Troublesome
BH1218 Hynix
H9TKNNN2GDMP
LANDM 217A
SMSC
LAN9512-JZX
B1215-A1B17
BR150188B
ASE-TW (e3)
2E
220
16H
14

6.9 / 5.9

SE8117T33
1213-LF
  • None
RPi1T.jpg
RPi1B.jpg
RS Mortimer
BH1218 Hynix
H9TKNNN2GDMP
LANDM 218A
SMSC
LAN9512-JZX
B1215-A1B17
BR150188A
ASE-TW (e3)
2E
220
16H
14

? / ?

SE8117T33
1213-LF
  • None
RPi2T.jpg
RPi2B.jpg
RS Mortimer
BH1218 Hynix
H9TKNNN2GDMP
LRNOM 217A
SMSC
LAN9512-JZX
B1215-A1B17
8R150188B
ASE-TW (e3)
2E
22-
16H
14

? / ?

SE8117T33
1213-LF
  • D1 shorted when attaching a Neewer HDMI to VGA adapter. The adapter has had no other tests and the raspberry pi's HDMI output has not been connected to any other devices before or since.
RaspberryPi-BH1218-Front-Tom1989.jpg
RaspberryPi-BH1218-Back-Tom1989.jpg
RS Tom1989
BH1208 Hynix
H9TKNNN2GDMP
LANDM 149A
SMSC
LAN9512-JZX
B1134-A1B17
BR147769B
STA-SG
220
16V
EE2
 ?

? / ?

SE8117T33
1001-LF
  • Stable, powers up off any charger. Powers off laptop USB without any issues
  • Ethernet: LU1S041ALF 1018M
Farnell Tass
BH1213 Hynix
H9TKNNN2GDMP
LANDM 149A
SMSC
LAN9512-JZX
B1134-A1B17
BR147769B
STA-SG
n2
220C
UD
 ?

? / ?

SE8117T33
943-LF
  • Stable, no power issues (not thouroughly tested)
  • Ethernet: HR901110A 1211|
RS Tass
BH1218 Hynix
H9TKNNN2GDMP
LANDM 217A
SMSC
LAN9512-JZX
B1216-A1B17
8R149482C
ASE-TW (e3)
2E
220
16H
14

14 / 5.1

SE8117T33
1213-LF
  • Up headless with Squeeze and Wheezy for ~six weeks, light duty, no problems
  • Ethernet: HR901110A 1211
Rpi001F.jpg
Rpi001R.jpg
RS Davidm870
BS1218 Samsung
216
K42P2G324ED-AGG1
GAL0839T
SMSC
LAN9512-JZX
B1212-A1B17
8R149885A
ASE-TW (e3)
220
16V
EE5
T014

T014 / ?

SE8117T33
1213-LF
  • Comes upp headless with Wheezy, not tested extensively
  • Ethernet: HR901110A 1218
Rpi002F.jpg
Rpi002R.jpg
Farnell Davidm870
BS1219 Samsung
216
K4P2G324ED-AGC1
GAL0859V
SMSC
LAN9512-JZX
B1216-A1B17
8R149482C
ASE-TW (e3)
2E
220
16H
T014

2.9ohm / 3.0ohm

SE8117T33
0941-LF
  • First had problems (freezing, no LAN, etc.) due to low quality power supply - cheap ebay adaptor. Solved with own PSU construction with 7805 stabiliser adjusted to 5.25V. Now works OK with Raspbian “wheezy”, but not yet tested extensively.
  • Ethernet: HR901110A 1220
  • F3 0.3ohm
RPi-BS1219-Front Pinoccio.jpg
RPi-BS1219-Back Pinoccio.jpg
Farnell Pinoccio
BS1219 Samsung
216
K4P2G324ED-AGC1
GAL0859D
SMSC
LAN9512-JZX
B1216-A1B17
8R149482C
ASE-TW (e3)
2E
220
16H
T014 / T014

? / ?

SE8117T33
0941-LF
  • No issues
  • Ethernet: HanRun HR901110A 1220
  • FN120659744
Error creating thumbnail: Invalid thumbnail parameters
Error creating thumbnail: Invalid thumbnail parameters
Farnell [SLB] @slabua
BH1222 Hynix
H9TKNNN2GDMP
LANDM 214A
SMSC
LAN9512-JZX
B1215-A1B17
8R148168E
ASE-TW (e3)
2E
220
16H
T014 / T014

? / ?

SE8117T33
1217-LF
  • No issues
  • Ethernet: HanRun HR901110A 1225
  • E2712RSV1.0B1.1
Error creating thumbnail: Invalid thumbnail parameters
Error creating thumbnail: Invalid thumbnail parameters
RS [SLB] @slabua
BS1224 Samsung
222
K4P2G324ED-AGC1
GAA0419T
SMSC
LAN9512-JZX
B1222-A1B17
8R150543C
CTI-TW (e3)
2F
220
16H
T014 / T014

? / ?

SE8117T33
1217-LF
  • Ethernet: HanRun HR901110A 1225
Farnell accumulator
BS1224 Samsung
222
K4P2G324ED-AGC1
GAA0519H
SMSC
LAN9512-JZX
B1223-A1B17
8R15D81DA
CTI-TW (e3)
2F
220
16H
0000 / 0000

0 / 0

SE8117T33
1220-LF
  • Ethernet: HanRun HR901110A 1225
  • No Issues
  • Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
RPi-BS1224-Front Shuckle.jpg
Farnell shuckle
BS1218 Samsung
216
K4P26324ED-AGC1
GAL0839R
SMSC
LAN9512-JZX
B1215-A1B17
8R150188B
ASE-TW
(e3)
2E
220
16H
F014

? / ?

SE8117T33
1213-LF
  • None
Farnell d4lamar
BS1222 Samsung
225
K4P2G324ED-AGC1
GAC0289E
SMSC
LAN9512-JZX
B1227-A1B17
8R1511968
CTI-TW (e3)
2F
220
16H
0000 / 0000

0 / 0

SE8117T33
1217-LF
  • Ethernet: HanRun HR901110A 1228
  • Both boards by wcfields ordered at the same time/date.
  • Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
MCM wcfields
BS1232 Samsung
225
K4P2G324ED-AGC1
GAC0289H
SMSC
LAN9512-JZX
B1227-A1B17
8R151261A
CTI-TW (e3)
2F
220
16H
0000 / 0000

0 / 0

SE8117T33
1225-LF
  • Ethernet: HanRun HR901110A 1228
  • Both boards by wcfields ordered at the same time/date.
  • Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
MCM wcfields
BS1228 Samsung
234
K4P2G324ED-AGC1
GAK1229X
SMSC
LAN9512-JZX
B1228-A1B17
8R151303B
CTI-TW (e3)
2E
220
16H
0000 / 0000

? / ?

SE8117T33
1220-LF
 * Serious problems with the 4GB SDHC-Card ordered with the board on initial testing with Gentoo (corrupted FS)
 * Same issues using rasbian and two different supported SD cards
 * Using RS original power adapter
RC FKlama
BS1233 Samsung
231
K4P4G324EB-AGC1
GKG0609V
(512MB version)
SMSC
LAN9512-JZX
B1227-A1B17
8R151261A
CTI-TW (e3)
2E
220
CFP
2G6
None / None

? / ?

17-33G
RRB32 (ON)
-Ethernet Jack: No visible branding
-PS: 500mA Mobile phone charger & USB Port on Laptop and Desktop (These are all I had)
-Fuse(s): ONLY seems to have green polyswitch (F3) on bottom side of board F1 and F2 don't exist
-In the position of the (other fuses) there is a mounting hole, likewise there is also a mounting hole under the Raspberry Pi Logo.
-There is also an extra header (P5) defined on the bottom side of the PCB near P1 (which is on the top side)
-Won't boot with a known working (This same card will boot on BS1215 ) Kingston 4GB Class 4 SD Card, Raspbian "wheezy" 2012-09-18
-The unit WILL boot from the SD card bought from Element 14.
-Will add more when I know more.
Farnell/Element14 (AU) TheSteveB
BS1236 Samsung
225
K4P46324EB-AGC1
GKEM509X
(512MB version)
SMSC
LAN9512-JZX
B1232-A1B17
8R151680A
CTI-TW (e3)
2F
220
16H
None / None

? / ?

SE8117T33
1225-LF
RS Yaron