Difference between revisions of "RidgeRun LeopardBoard SDK Hints"

From eLinux.org
Jump to: navigation, search
('Leopard Board got bricked ' BOOTUBLStarting UART Boot...)
(Add categories)
 
(33 intermediate revisions by 2 users not shown)
Line 47: Line 47:
 
2. Apply the [[Media:mac_address.patch]] that generates a random MAC address for the leopard.
 
2. Apply the [[Media:mac_address.patch]] that generates a random MAC address for the leopard.
  
=== 'USB Host mode' working ===
 
 
In order to accomplish USB host mode on Leopard, some hardware modifications need to be done. For more details visit:
 
[http://designsomething.org/leopardboard/f/22/t/73.aspx USB Host Mode (HW)]
 
 
Besides the hardware modifications, the [[Media:usb_mouse.patch]] needs to be applied on kernel 2.6.29.
 
  
 
=== 'Leopard Board got bricked ' BOOTUBLStarting UART Boot... ===
 
=== 'Leopard Board got bricked ' BOOTUBLStarting UART Boot... ===
Line 73: Line 67:
 
the MTD partitions causing the above messages. To solve this issue:
 
the MTD partitions causing the above messages. To solve this issue:
  
1. Run "make installbootloader": this will upgrade your board with the uboot that comes with the SDK.
+
1. Run "make installbootloader": this will upgrade your board with the uboot that comes with the SDK
2. Reboot your board.
+
 
3. Run "make install".
+
2. Reboot your board
 +
 
 +
3. Run "make install"
  
 
If the problem persists, your board probably got bricked, refer to: [http://designsomething.org/leopardboard/f/22/t/97.aspx How to recover a bricked Leopard Board]
 
If the problem persists, your board probably got bricked, refer to: [http://designsomething.org/leopardboard/f/22/t/97.aspx How to recover a bricked Leopard Board]
 +
 +
=== 'xdctools and dvsdk directories not found' ===
 +
 +
The SDK requires several tools provided by TI, which you should have installed on your host machine.
 +
 +
If the following error appears, you should download [http://software-dl.ti.com/dsps/dsps_registered_sw/sdo_sb/targetcontent/rtsc/xdctools_3_10/xdctools_3_10_05_61/index_external.html xdctools_setuplinux_3_10_05_61.bin]
 +
 +
<pre>
 +
Please provide the path to xdctools_3_10_05_61 installation location or press ctrl-c to abort
 +
 +
Unable to find the directory . Aborting
 +
make[1]: *** [xdctools_3_10_05_61] Error 1
 +
make[1]: Leaving directory `<home_directory>/DM355SDK789311/proprietary/xdctools_3_10_05'
 +
Error building xdctools_3_10_05
 +
make: *** [dependency_build] Error 1
 +
 +
</pre>
 +
 +
Also, if the following error appears, you should download [https://focus-webapps.ti.com/licreg/productdownload.tsp?toPerform=productDownload&downloadPage=true&location=http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/dvsdk/DVSDK_2_00/latest//exports//dvsdk_setuplinux_2_00_00_22.bin dvsdk_setuplinux_2_00_00_22.bin]
 +
 +
<pre>
 +
Please provide the path to dvsdk_2_00_00_22 installation location or press ctrl-c to abort
 +
 +
Unable to find the file /.dvsdk_version. Aborting
 +
make[1]: *** [dvsdk_2_00_00_22] Error 1
 +
make[1]: Leaving directory `<home_directory>/DM355SDK789311/proprietary/dvsdk_2_00_00'
 +
Error building dvsdk_2_00_00
 +
make: *** [dependency_build] Error 1
 +
 +
</pre>
 +
 +
Both packages should be install in your home directory for the SDK to find them automatically, if you do install these tools in another path, you can provide the correct path when the SDK requests it or create a dynamic link from that path to your home directory.
 +
 +
=== 'Error building gst-dmai-plugins' ===
 +
 +
If you are having the following error when building gst-dmai-plugins:
 +
 +
<pre>
 +
js: "/home/jim/DM355SDK789311/proprietary/xdctools_3_10_05/
 +
xdctools_3_10_05_61/packages/xdc/xdc.tci", line 461:
 +
xdc.services.global.XDCException: xdc.MODULE_NOT_FOUND: xdc.module:
 +
module name '-p' must be qualified with its package name
 +
  "./config.bld", line 5
 +
gmake: *** No rule to make target `.configuro'.  Stop.
 +
js: "/home/jim/DM355SDK789311/proprietary/xdctools_3_10_05/
 +
xdctools_3_10_05_61/packages/xdc/tools/Cmdr.xs", line 40: Error:
 +
xdc.tools.configuro: configuration failed due to earlier errors
 +
(status = 2); 'linker.cmd' deleted.
 +
</pre>
 +
 +
You might have a corrupted file system on your host machine.
 +
*Run 'make clean' in ~/DM355SDK789311$
 +
*Check for any messages about corrupted files in the log, if found, fix the corresponding issue.
 +
*Run 'make clean' again
 +
*Compile again the SDK: 'make'
 +
 +
=== 'mono (mono-common) is NOT installed' ===
 +
 +
It is a known issue with the old SDK: LeopardSDK-781811-Linux-x86-Install.bin. The issue basically consists on the package mono-common not installed, and then mono-gmcs, when they both are already installed in the host machine.
 +
 +
<pre>
 +
>> mono (mono-common) is NOT installed
 +
  gmcs (mono-gmcs) is installed
 +
There are missing packages, please install them:
 +
apt-get install mono-common
 +
make: *** [.oscheck] Error 1
 +
</pre>
 +
 +
One workaround to get pass this issue, once you have both packages installed, is to remove gmcs from:
 +
 +
<pre>
 +
bsp/arch/host.required
 +
</pre>
 +
 +
or you can also create a symbolic link to the gmcs2 with name gmcs
 +
 +
<pre>
 +
sudo ln -s /usr/bin/gmcs /usr/bin/gmcs2
 +
</pre>
 +
 +
=== CMEMK errors when capturing video ===
 +
 +
This is not a non fatal error found in the SDK when video is captured using the VGA.
 +
 +
<pre>
 +
 +
Execution ended after 13373478335 ns.
 +
Setting pipeline to PAUSED ...
 +
Setting pipeline to READY ...
 +
Setting pipeline to NULL ...
 +
[42949461.220000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87b14000
 +
[42949461.230000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d8000
 +
CMEM Error: free[42949461.240000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d3000
 +
: failed to free[42949461.250000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87c8a000
 +
0x41c1c000
 +
CME[42949461.260000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d2000
 +
M Error: free: f[42949461.270000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d1000
 +
ailed to free 0x[42949461.280000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874ec000
 +
41997000
 +
CMEM E[42949461.290000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87507000
 +
rror: free: failed to free 0x419ab000
 +
CMEM Error: free: failed to free 0x419ac000
 +
CMEM Error: free: failed to free 0x41b22000
 +
CMEM Error: free: failed to free 0x41b23000
 +
 +
</pre>
 +
 +
 +
 +
In order to correct this issue, the patch [[Media:Update-cmem.patch]] should be applied in DM355SDK789311/proprietary/dvsdk_2_00_00.
 +
 +
== Integrating the audio codecs on RR SDK ==
 +
 +
'''Important:''' The audio codecs are still been tested. Their functionality needs to be improved, there for many changes are required.
 +
 +
=== RidgeRun Integration and Testing Status ===
 +
 +
 +
{| border=2
 +
! Codec !! Example Verified !! GStreamer Integration Complete !! GStreamer Integration Verified !! Notes
 +
|-
 +
|  G.711 encode
 +
| Not tested
 +
| Not integrated
 +
| Not verified
 +
|
 +
|-
 +
|  G.711 decode
 +
| Not tested
 +
| Not integrated
 +
| Not verified
 +
|
 +
|-
 +
|  MP3 encode
 +
| Complete
 +
| Complete
 +
| Complete
 +
| A
 +
|-
 +
|  MP3 decode
 +
| Complete
 +
| Complete
 +
| Complete
 +
|
 +
|-
 +
|  WMA encode
 +
| Example fails.
 +
|
 +
|
 +
|
 +
|-
 +
|  WMA decode
 +
| No tested.
 +
| Not integrated
 +
| Not verified
 +
|
 +
|-
 +
|  AAC encode
 +
| Complete
 +
| Complete
 +
| Complete
 +
| A
 +
|-
 +
|  AAC decode
 +
| Complete
 +
| Complete
 +
| Complete
 +
|
 +
|-
 +
|  AEC <br>(acoustic echo cancellation)
 +
| Not tested
 +
| Not integrated
 +
| Not verified
 +
|
 +
|-
 +
|}
 +
 +
Notes:
 +
 +
* A - Can not record from alsa (alsasrc) and encode on the same GStreamer pipeline. Can record from alsa (alsasrc) and save to a file (in .pcm format).
 +
 +
=== Integrating the audio codecs into the SDK ===
 +
 +
'''NOTE:''' This is still under construction
 +
 +
* Select the codecs in the SDK configuration menu
 +
 
 +
  1. Run make config
 +
  2. Go to: Proprietary software
 +
  3. Select:
 +
            Texas Instruments CodecEngine for DM355
 +
            Gstreamer DMAI plugins
 +
              ------> SVN plugins source (Branch)
 +
            Build DM355s Codec configuration instead of standard D355 codecs
 +
 +
* You need to download the codecs from Texas Instruments page. [http://www.go-dsp.com/forms/TIDigitalMediaSWCM/index.htm Download]. Once you extract all the files contained in the package:
 +
 +
*Create a folder name codecs under proprietary.
 +
<pre>
 +
DM355SDK789311/proprietary$ mkdir codecs
 +
</pre>
 +
 +
*Copy the folder with the codecs in the SDK directory
 +
<pre>
 +
cp bundle-dm355s-AUDIO1-v1.2/aaclc_enc_2_6_00_production_dm355_mvl/packages-production/ittiam DM355SDK789311/proprietary/codecs -R
 +
</pre>
 +
 +
Repeat this step for:
 +
<pre>
 +
cp bundle-dm355s-AUDIO1-v1.2/mp3_enc_2_8_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
 +
cp bundle-dm355s-AUDIO1-v1.2/mp3_dec_3_6_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
 +
cp bundle-dm355s-AUDIO1-v1.2/aaclc_enc_2_6_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
 +
cp bundle-dm355s-AUDIO1-v1.2/wma_dec_4_6_01_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
 +
cp bundle-dm355s-AUDIO1-v1.2/wma_enc_2_5_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
 +
 +
</pre>
 +
 +
*After the last step, the folder /DM355SDK789311/proprietary/codecs/ittiam/codecs$ should look like this:
 +
 +
<pre>
 +
aac_dec  aaclc_enc  mp3_dec  mp3_enc  wma_dec  wma_enc
 +
</pre>
 +
 +
'''NOTE:''' This is important, because the encoders and decoders are going to search for the available codecs in this directory.
 +
 +
*Apply the patch for the codecs to include the parameters definitions for the mp3 and aac encoders. This [[Media:Encoding-parameters.patch]] needs to be applied on the directory DM355SDK789311/proprietary/codecs.
 +
 +
*The audio codecs have been tested and are working in Diego Dompe's branch, specifically in the revision 496.
 +
 +
1. Go to /DM355SDK789311/proprietary/gst-dmai-plugins/
 +
    make clean
 +
 +
2. Go to /DM355SDK789311/proprietary/gst-dmai-plugins/src/
 +
    svn update -r 496
 +
    autoreconf --install
 +
 +
3. Apply the [[Media:Audio_decoders.patch]] in the directory /DM355SDK789311/proprietary/gst-dmai-plugins/src/src
 +
 +
4. Compile the plugins.
 +
    Go to /DM355SDK789311/proprietary/gst-dmai-plugins/
 +
    make VERBOSE=1
 +
 +
5. Install the plugins
 +
    Go to /DM355SDK789311/proprietary/gst-dmai-plugins/
 +
    make install
 +
 +
=== Disable audio codecs in the SDK ===
 +
 +
If you want to disable an specific codec in the SDK, follow the next steps. This example will remove the aac encoder and decoder.
 +
 +
1. Modify the dm355s.cfg file
 +
 +
<pre>
 +
* Go to DM355SDK840402/proprietary/gst-dmai-plugins/src/src$
 +
* Open the dm355s.cfg file
 +
* Comment the lines:
 +
      var AAC_DEC = xdc.useModule('ittiam.codecs.aac_dec.ce.AAC_DEC');
 +
      var AACLC_ENC = xdc.useModule('ittiam.codecs.aaclc_enc.ce.AACLC_ENC');
 +
      {name: "aaclcdec", mod: AAC_DEC, local: true, groupId: 1},
 +
      {name: "aaclcenc", mod: AACLC_ENC, local: true, groupId: 1},
 +
</pre>
 +
 +
2. Modify the configure.ac file
 +
 +
<pre>
 +
* Go to DM355SDK840402/proprietary/gst-dmai-plugins/src$
 +
* Open the configure.ac file
 +
* Comment the lines:
 +
      #AC_DEFINE([AACLC_ARM_ITTIAM_ENCODER],[1],[Ittiam ARM AACLC Encoder])
 +
      enable_aaclcenc_xdm1=1;
 +
      enable_aaclcdec_xdm1=1;
 +
</pre>
 +
 +
3. Compile the plugins and install them
 +
 +
<pre>
 +
* Go to DM355SDK840402/proprietary/gst-dmai-plugins$
 +
* make VERBOSE=1
 +
* make install
 +
</pre>
 +
 +
[[Category:Development Boards]]
 +
[[Category:Tips and Tricks]]

Latest revision as of 10:29, 28 October 2011

Solutions to known issues

'division by zero' in kernel error when I try to use ALSA input

This is a known issue that has been discussed on the ASOC mailing list. The problem is that the function davinci_pcm_enqueue_dma performs this operations:

data_type = prtd->params->data_type;
count = period_size / data_type;

The first time, data_type is set to zero, so we get the error Division by zero in kernel. This is the reason why the pipe arecord | aplay works after running arecord or aplay first.

Apply the Media:Asoc-davinci-pcm.patch to the kernel 2.6.29 to resolve this issue.

'Kernel panic' Unable to mount root fs when using NFS

This issue happens when NFS file system is used. Leopard Board does not have a MAC address assign, this issue can be detected by taking a look into the kernel log after booting the board:

1. MAC address is set to 00:00:00:00:00

[42949373.950000] dm9000 Ethernet Driver, V1.31
[42949374.080000] dm9000 dm9000: eth%d: Invalid ethernet MAC address. Please seg
[42949374.080000] eth0 (dm9000): not using net_device_ops yet
[42949374.090000] eth0: dm9000e at c780c000,c7810016 IRQ 73 MAC: 00:00:00:00:00)

2. Kernel panic error

[42949465.940000] Kernel panic - not syncing: VFS: Unable to mount root fs on u)

There are different ways of solving this issue:

1. Forced the leopard to get a MAC address: run the ping command in the u-boot console:

Leopard Board # ping <ip_address>   or 
Leopard Board # setenv bootcmd="ping 192.168.1.1;nboot KERNEL"

2. Apply the Media:mac_address.patch that generates a random MAC address for the leopard.


'Leopard Board got bricked ' BOOTUBLStarting UART Boot...

Whenever UBL or the Uboot on a Leopard Board fail, this means that your board got bricked, however, there's an easy way to recover it. For information on how to recover your leopard, go to: How to recover a bricked Leopard Board

'NAND read: 'FS' is not a number' UBOOT,KERNEL,FS are not set

This issue causes your board to do not boot, causing the following message:

NAND read: 'FS' is not a number

NAND read: 'KERNEL' is not a number
## Booting image at 82000000 ...
Bad Magic Number

The problem is that "make install" was ran over the uboot that comes preinstalled on the Leopard Board. This uboot doesn't support the MTD partitions causing the above messages. To solve this issue:

1. Run "make installbootloader": this will upgrade your board with the uboot that comes with the SDK

2. Reboot your board

3. Run "make install"

If the problem persists, your board probably got bricked, refer to: How to recover a bricked Leopard Board

'xdctools and dvsdk directories not found'

The SDK requires several tools provided by TI, which you should have installed on your host machine.

If the following error appears, you should download xdctools_setuplinux_3_10_05_61.bin

Please provide the path to xdctools_3_10_05_61 installation location or press ctrl-c to abort

Unable to find the directory . Aborting
make[1]: *** [xdctools_3_10_05_61] Error 1
make[1]: Leaving directory `<home_directory>/DM355SDK789311/proprietary/xdctools_3_10_05'
Error building xdctools_3_10_05
make: *** [dependency_build] Error 1

Also, if the following error appears, you should download dvsdk_setuplinux_2_00_00_22.bin

Please provide the path to dvsdk_2_00_00_22 installation location or press ctrl-c to abort

Unable to find the file /.dvsdk_version. Aborting
make[1]: *** [dvsdk_2_00_00_22] Error 1
make[1]: Leaving directory `<home_directory>/DM355SDK789311/proprietary/dvsdk_2_00_00'
Error building dvsdk_2_00_00
make: *** [dependency_build] Error 1

Both packages should be install in your home directory for the SDK to find them automatically, if you do install these tools in another path, you can provide the correct path when the SDK requests it or create a dynamic link from that path to your home directory.

'Error building gst-dmai-plugins'

If you are having the following error when building gst-dmai-plugins:

js: "/home/jim/DM355SDK789311/proprietary/xdctools_3_10_05/
xdctools_3_10_05_61/packages/xdc/xdc.tci", line 461:
xdc.services.global.XDCException: xdc.MODULE_NOT_FOUND: xdc.module:
module name '-p' must be qualified with its package name
   "./config.bld", line 5
gmake: *** No rule to make target `.configuro'.  Stop.
js: "/home/jim/DM355SDK789311/proprietary/xdctools_3_10_05/
xdctools_3_10_05_61/packages/xdc/tools/Cmdr.xs", line 40: Error:
xdc.tools.configuro: configuration failed due to earlier errors
(status = 2); 'linker.cmd' deleted.

You might have a corrupted file system on your host machine.

  • Run 'make clean' in ~/DM355SDK789311$
  • Check for any messages about corrupted files in the log, if found, fix the corresponding issue.
  • Run 'make clean' again
  • Compile again the SDK: 'make'

'mono (mono-common) is NOT installed'

It is a known issue with the old SDK: LeopardSDK-781811-Linux-x86-Install.bin. The issue basically consists on the package mono-common not installed, and then mono-gmcs, when they both are already installed in the host machine.

 >> mono (mono-common) is NOT installed
   gmcs (mono-gmcs) is installed
There are missing packages, please install them:
 apt-get install mono-common
make: *** [.oscheck] Error 1

One workaround to get pass this issue, once you have both packages installed, is to remove gmcs from:

bsp/arch/host.required

or you can also create a symbolic link to the gmcs2 with name gmcs

sudo ln -s /usr/bin/gmcs /usr/bin/gmcs2

CMEMK errors when capturing video

This is not a non fatal error found in the SDK when video is captured using the VGA.


Execution ended after 13373478335 ns.
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
[42949461.220000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87b14000
[42949461.230000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d8000
CMEM Error: free[42949461.240000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d3000
: failed to free[42949461.250000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87c8a000
 0x41c1c000
CME[42949461.260000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d2000
M Error: free: f[42949461.270000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d1000
ailed to free 0x[42949461.280000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874ec000
41997000
CMEM E[42949461.290000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87507000
rror: free: failed to free 0x419ab000
CMEM Error: free: failed to free 0x419ac000
CMEM Error: free: failed to free 0x41b22000
CMEM Error: free: failed to free 0x41b23000


In order to correct this issue, the patch Media:Update-cmem.patch should be applied in DM355SDK789311/proprietary/dvsdk_2_00_00.

Integrating the audio codecs on RR SDK

Important: The audio codecs are still been tested. Their functionality needs to be improved, there for many changes are required.

RidgeRun Integration and Testing Status

Codec Example Verified GStreamer Integration Complete GStreamer Integration Verified Notes
G.711 encode Not tested Not integrated Not verified
G.711 decode Not tested Not integrated Not verified
MP3 encode Complete Complete Complete A
MP3 decode Complete Complete Complete
WMA encode Example fails.
WMA decode No tested. Not integrated Not verified
AAC encode Complete Complete Complete A
AAC decode Complete Complete Complete
AEC
(acoustic echo cancellation)
Not tested Not integrated Not verified

Notes:

  • A - Can not record from alsa (alsasrc) and encode on the same GStreamer pipeline. Can record from alsa (alsasrc) and save to a file (in .pcm format).

Integrating the audio codecs into the SDK

NOTE: This is still under construction

  • Select the codecs in the SDK configuration menu
 1. Run make config
 2. Go to: Proprietary software
 3. Select:
           Texas Instruments CodecEngine for DM355
           Gstreamer DMAI plugins
              ------> SVN plugins source (Branch)
           Build DM355s Codec configuration instead of standard D355 codecs
  • You need to download the codecs from Texas Instruments page. Download. Once you extract all the files contained in the package:
  • Create a folder name codecs under proprietary.
DM355SDK789311/proprietary$ mkdir codecs
  • Copy the folder with the codecs in the SDK directory
cp bundle-dm355s-AUDIO1-v1.2/aaclc_enc_2_6_00_production_dm355_mvl/packages-production/ittiam DM355SDK789311/proprietary/codecs -R

Repeat this step for:

cp bundle-dm355s-AUDIO1-v1.2/mp3_enc_2_8_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/mp3_dec_3_6_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/aaclc_enc_2_6_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/wma_dec_4_6_01_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/wma_enc_2_5_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R

  • After the last step, the folder /DM355SDK789311/proprietary/codecs/ittiam/codecs$ should look like this:
aac_dec  aaclc_enc  mp3_dec  mp3_enc  wma_dec  wma_enc

NOTE: This is important, because the encoders and decoders are going to search for the available codecs in this directory.

  • Apply the patch for the codecs to include the parameters definitions for the mp3 and aac encoders. This Media:Encoding-parameters.patch needs to be applied on the directory DM355SDK789311/proprietary/codecs.
  • The audio codecs have been tested and are working in Diego Dompe's branch, specifically in the revision 496.
1. Go to /DM355SDK789311/proprietary/gst-dmai-plugins/
   make clean
2. Go to /DM355SDK789311/proprietary/gst-dmai-plugins/src/ 
   svn update -r 496
   autoreconf --install
3. Apply the Media:Audio_decoders.patch in the directory /DM355SDK789311/proprietary/gst-dmai-plugins/src/src
4. Compile the plugins. 
   Go to /DM355SDK789311/proprietary/gst-dmai-plugins/
   make VERBOSE=1
5. Install the plugins
   Go to /DM355SDK789311/proprietary/gst-dmai-plugins/
   make install

Disable audio codecs in the SDK

If you want to disable an specific codec in the SDK, follow the next steps. This example will remove the aac encoder and decoder.

1. Modify the dm355s.cfg file

* Go to DM355SDK840402/proprietary/gst-dmai-plugins/src/src$
* Open the dm355s.cfg file
* Comment the lines:
      var AAC_DEC = xdc.useModule('ittiam.codecs.aac_dec.ce.AAC_DEC');
      var AACLC_ENC = xdc.useModule('ittiam.codecs.aaclc_enc.ce.AACLC_ENC');
      {name: "aaclcdec", mod: AAC_DEC, local: true, groupId: 1},
      {name: "aaclcenc", mod: AACLC_ENC, local: true, groupId: 1},

2. Modify the configure.ac file

* Go to DM355SDK840402/proprietary/gst-dmai-plugins/src$ 
* Open the configure.ac file
* Comment the lines:
      #AC_DEFINE([AACLC_ARM_ITTIAM_ENCODER],[1],[Ittiam ARM AACLC Encoder])
      enable_aaclcenc_xdm1=1;
      enable_aaclcdec_xdm1=1;

3. Compile the plugins and install them

 
* Go to DM355SDK840402/proprietary/gst-dmai-plugins$ 
* make VERBOSE=1
* make install