Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

RidgeRun LeopardBoard SDK Hints

Revision as of 13:58, 17 March 2010 by Cmurillo (Talk | contribs)

Jump to: navigation, search

Solutions to known issues

'division by zero' in kernel error when I try to use ALSA input

This is a known issue that has been discussed on the ASOC mailing list. The problem is that the function davinci_pcm_enqueue_dma performs this operations:

data_type = prtd->params->data_type;
count = period_size / data_type;

The first time, data_type is set to zero, so we get the error Division by zero in kernel. This is the reason why the pipe arecord | aplay works after running arecord or aplay first.

Apply the Media:Asoc-davinci-pcm.patch to the kernel 2.6.29 to resolve this issue.

'Kernel panic' Unable to mount root fs when using NFS

This issue happens when NFS file system is used. Leopard Board does not have a MAC address assign, this issue can be detected by taking a look into the kernel log after booting the board:

1. MAC address is set to 00:00:00:00:00

[42949373.950000] dm9000 Ethernet Driver, V1.31
[42949374.080000] dm9000 dm9000: eth%d: Invalid ethernet MAC address. Please seg
[42949374.080000] eth0 (dm9000): not using net_device_ops yet
[42949374.090000] eth0: dm9000e at c780c000,c7810016 IRQ 73 MAC: 00:00:00:00:00)

2. Kernel panic error

[42949465.940000] Kernel panic - not syncing: VFS: Unable to mount root fs on u)

There are different ways of solving this issue:

1. Forced the leopard to get a MAC address: run the ping command in the u-boot console:

Leopard Board # ping <ip_address>   or 
Leopard Board # setenv bootcmd="ping;nboot KERNEL"

2. Apply the Media:mac_address.patch that generates a random MAC address for the leopard.

'Leopard Board got bricked ' BOOTUBLStarting UART Boot...

Whenever UBL or the Uboot on a Leopard Board fail, this means that your board got bricked, however, there's an easy way to recover it. For information on how to recover your leopard, go to: How to recover a bricked Leopard Board

'NAND read: 'FS' is not a number' UBOOT,KERNEL,FS are not set

This issue causes your board to do not boot, causing the following message:

NAND read: 'FS' is not a number

NAND read: 'KERNEL' is not a number
## Booting image at 82000000 ...
Bad Magic Number

The problem is that "make install" was ran over the uboot that comes preinstalled on the Leopard Board. This uboot doesn't support the MTD partitions causing the above messages. To solve this issue:

1. Run "make installbootloader": this will upgrade your board with the uboot that comes with the SDK

2. Reboot your board

3. Run "make install"

If the problem persists, your board probably got bricked, refer to: How to recover a bricked Leopard Board

'xdctools and dvsdk directories not found'

The SDK requires several tools provided by TI, which you should have installed on your host machine.

If the following error appears, you should download xdctools_setuplinux_3_10_05_61.bin

Please provide the path to xdctools_3_10_05_61 installation location or press ctrl-c to abort

Unable to find the directory . Aborting
make[1]: *** [xdctools_3_10_05_61] Error 1
make[1]: Leaving directory `<home_directory>/DM355SDK789311/proprietary/xdctools_3_10_05'
Error building xdctools_3_10_05
make: *** [dependency_build] Error 1

Also, if the following error appears, you should download dvsdk_setuplinux_2_00_00_22.bin

Please provide the path to dvsdk_2_00_00_22 installation location or press ctrl-c to abort

Unable to find the file /.dvsdk_version. Aborting
make[1]: *** [dvsdk_2_00_00_22] Error 1
make[1]: Leaving directory `<home_directory>/DM355SDK789311/proprietary/dvsdk_2_00_00'
Error building dvsdk_2_00_00
make: *** [dependency_build] Error 1

Both packages should be install in your home directory for the SDK to find them automatically, if you do install these tools in another path, you can provide the correct path when the SDK requests it or create a dynamic link from that path to your home directory.

'Error building gst-dmai-plugins'

If you are having the following error when building gst-dmai-plugins:

js: "/home/jim/DM355SDK789311/proprietary/xdctools_3_10_05/
xdctools_3_10_05_61/packages/xdc/", line 461: xdc.MODULE_NOT_FOUND: xdc.module:
module name '-p' must be qualified with its package name
   "./config.bld", line 5
gmake: *** No rule to make target `.configuro'.  Stop.
js: "/home/jim/DM355SDK789311/proprietary/xdctools_3_10_05/
xdctools_3_10_05_61/packages/xdc/tools/Cmdr.xs", line 40: Error: configuration failed due to earlier errors
(status = 2); 'linker.cmd' deleted.

You might have a corrupted file system on your host machine.

  • Run 'make clean' in ~/DM355SDK789311$
  • Check for any messages about corrupted files in the log, if found, fix the corresponding issue.
  • Run 'make clean' again
  • Compile again the SDK: 'make'

'mono (mono-common) is NOT installed'

It is a known issue with the old SDK: LeopardSDK-781811-Linux-x86-Install.bin. The issue basically consists on the package mono-common not installed, and then mono-gmcs, when they both are already installed in the host machine.

 >> mono (mono-common) is NOT installed
   gmcs (mono-gmcs) is installed
There are missing packages, please install them:
 apt-get install mono-common
make: *** [.oscheck] Error 1

One workaround to get pass this issue, once you have both packages installed, is to remove gmcs from:


or you can also create a symbolic link to the gmcs2 with name gmcs

sudo ln -s /usr/bin/gmcs /usr/bin/gmcs2

CMEMK errors when capturing video

This is not a non fatal error found in the SDK when video is captured using the VGA.

Execution ended after 13373478335 ns.
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
[42949461.220000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87b14000
[42949461.230000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d8000
CMEM Error: free[42949461.240000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d3000
: failed to free[42949461.250000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87c8a000
CME[42949461.260000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d2000
M Error: free: f[42949461.270000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874d1000
ailed to free 0x[42949461.280000] CMEMK Error: FREE: Not a registered user of physical buffer 0x874ec000
CMEM E[42949461.290000] CMEMK Error: FREE: Not a registered user of physical buffer 0x87507000
rror: free: failed to free 0x419ab000
CMEM Error: free: failed to free 0x419ac000
CMEM Error: free: failed to free 0x41b22000
CMEM Error: free: failed to free 0x41b23000

In order to correct this issue, the patch Media:Update-cmem.patch should be applied in DM355SDK789311/proprietary/dvsdk_2_00_00.

Integrating the audio codecs on RR SDK

Important: The audio codecs are still been tested. Their functionality needs to be improved, there for many changes are required.

RidgeRun Integration and Testing Status

Codec Example Verified GStreamer Integration Complete GStreamer Integration Verified Notes
G.711 encode Not tested Not integrated Not verified
G.711 decode Not tested Not integrated Not verified
MP3 encode Complete Complete Complete A
MP3 decode Complete Complete Complete
WMA encode Example fails.
WMA decode No tested. Not integrated Not verified
AAC encode Complete Complete Complete A
AAC decode Complete Complete Complete
(acoustic echo cancellation)
Not tested Not integrated Not verified


  • A - Can not record from alsa (alsasrc) and encode on the same GStreamer pipeline. Can record from alsa (alsasrc) and save to a file (in .pcm format).

Integrating the audio codecs into the SDK

NOTE: These steps are still under construction. The patches required will be post on this wiki as soon as possible.

  • Select the codecs in the SDK configuration menu
 1. Run make config
 2. Go to: Proprietary software
 3. Select:
           Texas Instruments CodecEngine for DM355
           Gstreamer DMAI plugins
              ------> SVN plugins source (Branch)
           Build DM355s Codec configuration instead of standard D355 codecs
  • You need to download the codecs from Texas Instruments page. Download. Once you extract all the files contained in the package:
  • Create a folder name codecs under proprietary.
DM355SDK789311/proprietary$ mkdir codecs
  • Copy the folder with the codecs in the SDK directory
cp bundle-dm355s-AUDIO1-v1.2/aaclc_enc_2_6_00_production_dm355_mvl/packages-production/ittiam DM355SDK789311/proprietary/codecs -R

Repeat this step for:

cp bundle-dm355s-AUDIO1-v1.2/mp3_enc_2_8_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/mp3_dec_3_6_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/aaclc_enc_2_6_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/wma_dec_4_6_01_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R
cp bundle-dm355s-AUDIO1-v1.2/wma_enc_2_5_00_production_dm355_mvl/packages-production/ittiam/ DM355SDK789311/proprietary/codecs -R

  • After the last step, the folder /DM355SDK789311/proprietary/codecs/ittiam/codecs$ should look like this:
aac_dec  aaclc_enc  mp3_dec  mp3_enc  wma_dec  wma_enc

NOTE: This is important, because the encoders and decoders are going to search for the available codecs in this directory.

  • Apply the patch for the codecs to include the parameters definitions for the mp3 and aac encoders. This Media:Encoding-parameters.patch needs to be applied on the directory DM355SDK789311/proprietary/codecs.
  • The audio codecs have been tested and are working in Diego Dompe's branch, specifically in the revision 496.
1. Go to /DM355SDK789311/proprietary/gst-dmai-plugins/
   make clean
2. Go to /DM355SDK789311/proprietary/gst-dmai-plugins/src/ 
   svn update -r 496
   autoreconf --install
3. Apply the in the directory /DM355SDK789311/proprietary/gst-dmai-plugins/src/src
4. Compile the plugins
   cd ..
   make build install