Difference between revisions of "S3c2440kits"

From eLinux.org
Jump to: navigation, search
(Mother board 1 ----- Kit2440-III)
(Add category)
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
===Highlights===
 +
{|border="1"
 +
|Samsung S3C2440A, based on ARM920T, 400MHz<br>64MB SDRAM and 64MB NAND Flash<br>UART, Ethernet, Audio I/O, SD card,...<br>Four USB HOST and One USB device<br>Supports 24-bit TFT LCD with touchscreen<br>Supports Linux2.6 and WinCE 5.0
 +
|[[File:S3c2440kits-mini.jpg]]
 +
|}
 +
 
=='''Hardware'''==
 
=='''Hardware'''==
 
===CPU Board <b>----- [http://code.google.com/p/corewind2440/wiki/Core2440III Core2440-III]</b>===
 
===CPU Board <b>----- [http://code.google.com/p/corewind2440/wiki/Core2440III Core2440-III]</b>===
Line 70: Line 76:
 
|}
 
|}
 
<hr>
 
<hr>
 +
[[Category:Development Boards]]

Latest revision as of 08:40, 28 October 2011

Highlights

Samsung S3C2440A, based on ARM920T, 400MHz
64MB SDRAM and 64MB NAND Flash
UART, Ethernet, Audio I/O, SD card,...
Four USB HOST and One USB device
Supports 24-bit TFT LCD with touchscreen
Supports Linux2.6 and WinCE 5.0
S3c2440kits-mini.jpg

Hardware

CPU Board ----- Core2440-III

S3c2440-top.jpgS3c2440-back.jpg

  • ARM9 Samsung S3C2440A development board
  • 64Mbyte SDRAM, 64Mbyte Nand Flash
  • 250 pins connectors( Extend out all the I/O from S3C2440A with 250-pin connector)
  • One JTAG interface
  • RTC support
  • PCB: 6 layers, 78.7mm X 38mm X 1.6 mm

Mother board 1 ----- Kit2440-III

S3c2440-kit-interface.jpg

  • LCD/Touch Screen interface (40-pin FPC connector, support resolution up to 2048*2048)
  • Audio input and output slot (3.5mm audio jack)
  • 4 USB Host interface and 1 USB device
  • one SD card slot
  • One 10/100M Ethernet interface (RJ45)
  • 3 serial port(One 3-wire Serial port, the others was under the DB9 interface)
  • One 20-pin Jtag interface
  • One reset button
  • two expansion connector (two 20Pin 2mm pitch of the GPIO Interface Contains:Camera, SPI, I/O, AD)
  • PCB: 4 layers, 105mm x 80mm
  • Fully supports Linux2.6.29

Electrical Characteristics

  • Power supply: +9V
  • Working temperature: 0~70°C

Software

Linux

  • Version: 2.6.29
  • Compile: arm-linux-gcc-4.3.2
  • Support file system
    • Yaffs — readable and writable file system, default selection.
    • Cramfs — compressed read-only file system, not recommended.
    • Ext2 — available when connecting a hard-disk
    • Fat32 — be used in mobile storing device.
    • NFS — network file system, can be used for debugging applications and drivers
  • drivers for source code
    • 3 standard serial port drivers.
    • Audio driver ( support playing and recording ).
    • LCD drivers ( including: resolution 320×240, 240×320 and 640×480 ).
    • Touch-screen driver.
    • USB camera ( including: OV511 camera and others ).
    • USB mouse, USB keyboard, U disk, mobile hard disk and so on.
    • Nand Flash, SD card driver, Yaffs driver, Watchdog, DM9000 driver, RTC driver.
  • Linux application and service program.
    • busybox1.2.0 tool kit ( includes general Linux instructions ).
    • Telnet、FTP、inetd ( remote login tools and services ).
    • Madplay ( MP3 player in console ).
    • rz and sz ( file receiving and sending application via serial port in console ).
    • Qt/Embedded

Manuals

KIT2440_III_user_manul
KIT2440_III_Linux_Development_manual
KIT2440_III_WinCE_Development_manual
WinCE5_0_installation_guidance

Development Resoures


S3c2440kits-revl1-soft.jpg

Developers' Resources

Join and share full development
resources of KIT2440-III
Start Here! >>
Linux development >>
WinCE development >>

S3c2440kits-revl1-line2.jpg S3c2440kits-revl1-hard.jpg

Hardware Information

Major component
information available
Kit2440-III >>
Core2440-III >>



S3c2440kits-revl1-line2.jpg S3c2440kits-revl1-com.jpg

Buy now

Kit2440-III product
Marketplace
Go >>