Difference between revisions of "SBC3530"

From eLinux.org
Jump to: navigation, search
Line 26: Line 26:
 
==='''Hardware'''===
 
==='''Hardware'''===
 
{| border=1  
 
{| border=1  
||<STRONG>处理器</STRONG>
+
||<STRONG>CPU</STRONG>
|TI OMAP3530
+
|TI OMAP3530 Multi-Core CPU
|600MHz ARM Cortex™-A8内核 NEON™ SIMD协处理器 430MHz TMS320C64x+ DSP POWERVR SG™ 2D/3D图形加速处理引擎
+
|uperscalar ARM Cortex-A8 RISC core NEON™ SIMD co-processing 430MHz TMS320 C64x+ (DSP) core POWERVR SG™ 2D/3D graphics acceleration
 
|-
 
|-
 
|<STRONG>RAM</STRONG>
 
|<STRONG>RAM</STRONG>
Line 36: Line 36:
 
|colspan=2 |128MByte/256MByte/512MByte/1GByte Nand Flash
 
|colspan=2 |128MByte/256MByte/512MByte/1GByte Nand Flash
 
|-
 
|-
|<STRONG>以太网</STRONG>
+
|<STRONG>Ethernet</STRONG>
|colspan=2 |1x 10M/100M高性能以太网RJ45接口
+
|colspan=2 |1x 10M/100M High performance Ethernet, RJ45 interface
 
|-
 
|-
|rowspan=2|<STRONG>串口</STRONG>
+
|rowspan=2|<STRONG>COM Port</STRONG>
|colspan=2 |1x 5线RS232接口(TX,RX,CTS,RTS,GND)
+
|colspan=2 |1x RS232(5 Lines: TX,RX,CTS,RTS,GND)
 
|-
 
|-
|colspan=2 |2x 3.3V 5线UART(TX,RX,CTS,RTS,GND)
+
|colspan=2 |2x 3.3V UART(5 Lines: TX,RX,CTS,RTS,GND)
 
|-
 
|-
 
|<STRONG>USB Host</STRONG>
 
|<STRONG>USB Host</STRONG>
|colspan=2 |4x USB 2.0高速Host(每个口提供标准500mA供电)
+
|colspan=2 |4x USB 2.0 high speed host(each provide 500mA current)
 
|-
 
|-
 
|<STRONG>USB OTG</STRONG>
 
|<STRONG>USB OTG</STRONG>
|colspan=2 |1x USB 2.0高速OTG(可用作Device)
+
|colspan=2 |1x USB 2.0 high speed OTG(Device option)
 
|-
 
|-
|rowspan=2|<STRONG>音频</STRONG>
+
|rowspan=2|<STRONG>Audio</STRONG>
|colspan=2 |1x 3.5mm音频输出接口
+
|colspan=2 |1x 3.5mm stereo audio phone jack
 
|-
 
|-
|colspan=2 |1x 3.5mm麦克风输入接口
+
|colspan=2 |1x 3.5mm microphone jac
 
|-
 
|-
 
|<STRONG>VGA</STRONG>
 
|<STRONG>VGA</STRONG>
|colspan=2 |标准VGA输出接口,支持所有VESA标准分辨率
+
|colspan=2 |Standard VGA, support all VESA standard resolution
 
|-
 
|-
|rowspan=5|<STRONG>AV/S-Video视频输出</STRONG>
+
|rowspan=5|<STRONG>AV/S-Video Video Output
|colspan=2 |支持下列标准:
+
</STRONG>
 +
|colspan=2 |Support mode list:
 
|-
 
|-
 
|colspan=2 |NTSC-J, M
 
|colspan=2 |NTSC-J, M
Line 70: Line 71:
 
|-
 
|-
 
|rowspan=8|<STRONG>视频输入</STRONG>
 
|rowspan=8|<STRONG>视频输入</STRONG>
|colspan=2 |4通道视频输入
+
|colspan=2 |4 channel video input
 
|-
 
|-
|colspan=2 |最大支持:
+
|colspan=2 |Support up to:
 
|-
 
|-
|colspan=2 |4路CVBS
+
|colspan=2 |4 CVBS
 
|-
 
|-
|colspan=2 |或1路CVBS、1路YPbPr
+
|colspan=2 |Or 1 CVBS + 1 YPbPr/RGB(embedded sync)
 
|-
 
|-
|colspan=2 |或1路CVBS、1路RGB(内置复合同步信号)
+
|colspan=2 |Or 1 CVBS + 1 YPbPr/RGB(embedded sync)
 
|-
 
|-
|colspan=2 |或2路CVBS、1路S-Video
+
|colspan=2 |Or 2 CVBS + 1 S-Video
 
|-
 
|-
|colspan=2 |或2路S-Video
+
|colspan=2 |Or 2 S-Video
 
|-
 
|-
|colspan=2 |CVBS可支持NTSC/PAL/SECAM制式
+
|colspan=2 |CVBS supports NTSC/PAL/SECAM
 
|-
 
|-
|<STRONG>SD卡槽</STRONG>
+
|<STRONG>SD Slot</STRONG>
|colspan=2 |MMC/SD/SDIO/SDHC卡槽,最高支持32GByte容量
+
|colspan=2 |MMC/SD/SDIO/SDHC slot, support up to 32GByte
 
|-
 
|-
|<STRONG>铁电存储器</STRONG>
+
|<STRONG>FRAM</STRONG>
|colspan=2 |64Kbit/128Kbit/256Kbit/512Kbit无限次擦写高速铁电存储器
+
|colspan=2 |64KBit high speed F-RAM with virtually unlimited writing cycle
 
|-
 
|-
|<STRONG>安全加密</STRONG>
+
|<STRONG>Security</STRONG>
|colspan=2 |硬件加密验证
+
|colspan=2 |Hardware security-dog for hardware & software protection
 
|-
 
|-
 
|<STRONG>RTC</STRONG>
 
|<STRONG>RTC</STRONG>
|colspan=2 |内置RTC,使用CR1220 电池供电
+
|colspan=2 |CR1220 RTC battery socket
 
|-
 
|-
|rowspan=3|<STRONG>按钮</STRONG>
+
|rowspan=3|<STRONG>Button</STRONG>
|colspan=2 |1x 可编程用户中断按钮
+
|colspan=2 |1x Side button (user interrupt)
 
|-
 
|-
|colspan=2 |1x 机内RESET 按钮
+
|colspan=2 |1x Reset button (inside)
 
|-
 
|-
|colspan=2 |1x 机内POWERON 按钮
+
|colspan=2 |1x PowerON button (inside)
 
|-
 
|-
|rowspan=3|<STRONG>LED 指示灯</STRONG>
+
|rowspan=3|<STRONG>LED LED </STRONG>
|colspan=2 |2x 电源指示灯
+
|colspan=2 |2x Power LED
 
|-
 
|-
|colspan=2 |2x 可编程电源管理模块指示灯
+
|colspan=2 |2x Power management unit LED
 
|-
 
|-
|colspan=2 |2x 可编程GPIO 指示灯
+
|colspan=2 |2x GPIO LED
 
|-
 
|-
|<STRONG>启动模式选择开关</STRONG>
+
|<STRONG>Boot switch</STRONG>
|colspan=2 |1x 6 位启动模式选择拨码开关
+
|colspan=2 |1x 6Bit boot mode switch
 
|-
 
|-
|rowspan=4|<STRONG>电源</STRONG>
+
|rowspan=4|<STRONG>Power </STRONG>
|colspan=2 |1x 5V 4A DC 插口
+
|colspan=2 |1x 5V 4A DC Jack
 
|-
 
|-
|colspan=2 |1x 5V 4A TJC3 连接器
+
|colspan=2 |1x 5V 4A TJC3 connector
 
|-
 
|-
|colspan=2 |1x 电池管理模块接口
+
|colspan=2 |1x Battery module connector
 
|-
 
|-
|colspan=2 |1x 电源管理信号接口
+
|colspan=2 |1x Power management signal connector
 
|-
 
|-
|rowspan=8|<STRONG>扩展接口</STRONG>
+
|rowspan=8|<STRONG>Expansion connectors</STRONG>
|colspan=2 |1x 3.3V I2C 接口
+
|colspan=2 |1x 3.3V I2C port
 
|-
 
|-
|colspan=2 |1x 3.3V LCD 模块接口(支持触摸)
+
|colspan=2 |1x 3.3V LCD interface with touch screen support
 
|-
 
|-
|colspan=2 |1x 1.8V SPI 接口
+
|colspan=2 |1x 1.8V SPI port
 
|-
 
|-
|colspan=2 |1x 1.8V SDIO 接口
+
|colspan=2 |1x 1.8V SDIO expansion for WIFI module
 
|-
 
|-
|colspan=2 |1x 1.8V 6x6 扫描键盘接口
+
|colspan=2 |1x 1.8V 6x6 scanning keypad connector
 
|-
 
|-
|colspan=2 |1x 1.8V GPIO 扩展接口
+
|colspan=2 |1x 1.8V GPIO expansion
 
|-
 
|-
|colspan=2 |1x 1.8V GPMC 高速总线接口
+
|colspan=2 |1x 1.8V GPMC High speed bus expansion
 
|-
 
|-
|colspan=2 |1x 1.8V 数字摄像头模块接口
+
|colspan=2 |1x 1.8V Digital camera interface
 
|-
 
|-
 
|}
 
|}
Line 146: Line 147:
  
 
{|border=1  
 
{|border=1  
|colspan=2 |<STRONG>环境</STRONG>  
+
|colspan=2 |<STRONG>Conditions</STRONG>  
|colspan=2 |<STRONG>最小值</STRONG>
+
|colspan=2 |<STRONG>Min</STRONG>
|colspan=2 |<STRONG>典型值</STRONG>
+
|colspan=2 |<STRONG>Normal</STRONG>
|colspan=2 |<STRONG>值最大</STRONG>
+
|colspan=2 |<STRONG>Max</STRONG>
 
|-
 
|-
| colspan=2 |供电
+
| colspan=2 |Power supply
 
| colspan=2 |5V 0.3A
 
| colspan=2 |5V 0.3A
| colspan=2|5V 0.5A(备注2)
+
| colspan=2|5V 0.5A(mark 1)
| colspan=2|5V 4A(备注1)
+
| colspan=2|5V 4A(mark 2)
 
|-
 
|-
|colspan=2 |工作功耗
+
|colspan=2 |power consumption
 
|colspan=2 |1.5W  
 
|colspan=2 |1.5W  
|colspan=2 |2.5W(备注2)
+
|colspan=2 |2.5W(mark 1)
|colspan=2 |20W(备注1)
+
|colspan=2 |20W(mark 2)
 
|-
 
|-
|colspan=2 |工作温度(商业级版本)
+
|colspan=2 |Temperature(Commercial)
 
|colspan=2 |0°C
 
|colspan=2 |0°C
 
|colspan=2 |/
 
|colspan=2 |/
 
|colspan=2 |70°C
 
|colspan=2 |70°C
 
|-
 
|-
|colspan=2 |工作温度(工业级版本)
+
|colspan=2 |Temperature(Industrial)
 
|colspan=2 |-40°C
 
|colspan=2 |-40°C
 
|colspan=2 |/
 
|colspan=2 |/
 
|colspan=2 |0°C
 
|colspan=2 |0°C
 
|}
 
|}
<STRONG>备注1:</STRONG>该值为4 路USB 接口全部对外供电,并且接上LCD 模块、数字摄像头、WIFI 模块情况下的平均值。
+
Mark 1:The value is the average detected in the condition that CPU running at full speed in 600MHz working condition, other circuit in a working conditon, and does not access other modules, USB interface don’t in working condition.
<br />
+
Mark 2:The value is the average detected in the condition that 4 USB interface supply Power, and the board connected to the LCD module, digital camera, WIFI and other cases, etc.
<STRONG>备注2:</STRONG>该值为CPU 处于600MHz 全速工作状态,并且不接入其他模块,USB 接口不对外供电的情况下的平均值。
+

Revision as of 02:27, 10 February 2010

EMA SBC3530——http://www.ema-tech.com

EMA EGS3530

EMA-SBC3530-1.jpg


Overview

1.SBC3530 from EMA is a Low-power, high-performance single board computer based on TI’s OMAP35x multimedia applications processor. Designed with EPIC Standard and extendable architecture . SBC3530 helps users leverage the benefits of OMAP35x processor comprising of advanced Superscalar ARM Cortex-A8 RISC core with NEON co-processing, IVA2.2 subsystem with a C64x+ digital signal processor (DSP) core and SGX subsystem for 2D and 3D graphics acceleration (PowerVR).
2.The SBC3530 helps users building their products around the OMAP35x enjoy the benefits of faster user interfaces, faster data access and multi-standard encode/decode. Resolution up to 1920 * 1080, Supports multiple display output, such as VGA, LCD, S-Video and AV composite video output. Supports multi-standard encode/decode at D4 (1280×720p/60Hz) 30 fps. Supports multiple embedded operation system, such as Android, Embedded Linux, WinCE. Supports 4-channel video input, maximum support 4-way CVBS. Built-in hardware encryption and hardware authentication mechanism to better protect the user's application software.
3.SBC3530 comes with X-Loader、U-Boot、Linux Kernel(V2.6.30) and JFFS2 File system for Linux. The PSP Software Release from TI includes the Code Sourcery tool chain and the required source code and utilities.
4.It is an ideal platform for users to develop their applications.Present SBC3530 has been applied to mobile Internet devices, Global Positioning System (GPS), 2D/3D Game Station, medical equipment, Image Capture Machine, HMI, etc.

Specifications

Hardware

CPU TI OMAP3530 Multi-Core CPU uperscalar ARM Cortex-A8 RISC core NEON™ SIMD co-processing 430MHz TMS320 C64x+ (DSP) core POWERVR SG™ 2D/3D graphics acceleration
RAM 128MByte/256MByte/512MByte DDR
Flash 128MByte/256MByte/512MByte/1GByte Nand Flash
Ethernet 1x 10M/100M High performance Ethernet, RJ45 interface
COM Port 1x RS232(5 Lines: TX,RX,CTS,RTS,GND)
2x 3.3V UART(5 Lines: TX,RX,CTS,RTS,GND)
USB Host 4x USB 2.0 high speed host(each provide 500mA current)
USB OTG 1x USB 2.0 high speed OTG(Device option)
Audio 1x 3.5mm stereo audio phone jack
1x 3.5mm microphone jac
VGA Standard VGA, support all VESA standard resolution
AV/S-Video Video Output

Support mode list:
NTSC-J, M
PAL-B, D, G, H, I
PAL-M
CGMS-A
视频输入 4 channel video input
Support up to:
4 CVBS
Or 1 CVBS + 1 YPbPr/RGB(embedded sync)
Or 1 CVBS + 1 YPbPr/RGB(embedded sync)
Or 2 CVBS + 1 S-Video
Or 2 S-Video
CVBS supports NTSC/PAL/SECAM
SD Slot MMC/SD/SDIO/SDHC slot, support up to 32GByte
FRAM 64KBit high speed F-RAM with virtually unlimited writing cycle
Security Hardware security-dog for hardware & software protection
RTC CR1220 RTC battery socket
Button 1x Side button (user interrupt)
1x Reset button (inside)
1x PowerON button (inside)
LED LED 2x Power LED
2x Power management unit LED
2x GPIO LED
Boot switch 1x 6Bit boot mode switch
Power 1x 5V 4A DC Jack
1x 5V 4A TJC3 connector
1x Battery module connector
1x Power management signal connector
Expansion connectors 1x 3.3V I2C port
1x 3.3V LCD interface with touch screen support
1x 1.8V SPI port
1x 1.8V SDIO expansion for WIFI module
1x 1.8V 6x6 scanning keypad connector
1x 1.8V GPIO expansion
1x 1.8V GPMC High speed bus expansion
1x 1.8V Digital camera interface


Operating conditions

Conditions Min Normal Max
Power supply 5V 0.3A 5V 0.5A(mark 1) 5V 4A(mark 2)
power consumption 1.5W 2.5W(mark 1) 20W(mark 2)
Temperature(Commercial) 0°C / 70°C
Temperature(Industrial) -40°C / 0°C

Mark 1:The value is the average detected in the condition that CPU running at full speed in 600MHz working condition, other circuit in a working conditon, and does not access other modules, USB interface don’t in working condition. Mark 2:The value is the average detected in the condition that 4 USB interface supply Power, and the board connected to the LCD module, digital camera, WIFI and other cases, etc.