Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "SBC3530"

From eLinux.org
Jump to: navigation, search
Line 171: Line 171:
 
|}
 
|}
 
Mark 1:The value is the average detected in the condition that CPU running at full speed in 600MHz working condition, other circuit in a working conditon, and does not access other modules, USB interface don’t in working condition.
 
Mark 1:The value is the average detected in the condition that CPU running at full speed in 600MHz working condition, other circuit in a working conditon, and does not access other modules, USB interface don’t in working condition.
 +
<br />
 
Mark 2:The value is the average detected in the condition that 4 USB interface supply Power, and the board connected to the LCD module, digital camera, WIFI and other cases, etc.
 
Mark 2:The value is the average detected in the condition that 4 USB interface supply Power, and the board connected to the LCD module, digital camera, WIFI and other cases, etc.
 
<br />
 
<br />

Revision as of 07:19, 10 February 2010

EMA SBC3530——http://www.ema-tech.com

EMA EGS3530

EMA SBC3530


Overview

1.SBC3530 from EMA is a Low-power, high-performance single board computer based on TI’s OMAP35x multimedia applications processor. Designed with EPIC Standard and extendable architecture . SBC3530 helps users leverage the benefits of OMAP35x processor comprising of advanced Superscalar ARM Cortex-A8 RISC core with NEON co-processing, IVA2.2 subsystem with a C64x+ digital signal processor (DSP) core and SGX subsystem for 2D and 3D graphics acceleration (PowerVR).
2.The SBC3530 helps users building their products around the OMAP35x enjoy the benefits of faster user interfaces, faster data access and multi-standard encode/decode. Resolution up to 1920 * 1080, Supports multiple display output, such as VGA, LCD, S-Video and AV composite video output. Supports multi-standard encode/decode at D4 (1280×720p/60Hz) 30 fps. Supports multiple embedded operation system, such as Android, Embedded Linux, WinCE. Supports 4-channel video input, maximum support 4-way CVBS. Built-in hardware encryption and hardware authentication mechanism to better protect the user's application software.
3.SBC3530 comes with X-Loader、U-Boot、Linux Kernel(V2.6.30) and JFFS2 File system for Linux. The PSP Software Release from TI includes the Code Sourcery tool chain and the required source code and utilities.
4.It is an ideal platform for users to develop their applications.Present SBC3530 has been applied to mobile Internet devices, Global Positioning System (GPS), 2D/3D Game Station, medical equipment, Image Capture Machine, HMI, etc.

Specifications

Hardware

CPU TI OMAP3530 Multi-Core CPU uperscalar ARM Cortex-A8 RISC core NEON™ SIMD co-processing 430MHz TMS320 C64x+ (DSP) core POWERVR SG™ 2D/3D graphics acceleration
RAM 128MByte/256MByte/512MByte DDR
Flash 128MByte/256MByte/512MByte/1GByte Nand Flash
Ethernet 1x 10M/100M High performance Ethernet, RJ45 interface
COM Port 1x RS232(5 Lines: TX,RX,CTS,RTS,GND)
2x 3.3V UART(5 Lines: TX,RX,CTS,RTS,GND)
USB Host 4x USB 2.0 high speed host(each provide 500mA current)
USB OTG 1x USB 2.0 high speed OTG(Device option)
Audio 1x 3.5mm stereo audio phone jack
1x 3.5mm microphone jac
VGA Standard VGA, support all VESA standard resolution
AV/S-Video Video Output

Support mode list:
NTSC-J, M
PAL-B, D, G, H, I
PAL-M
CGMS-A
Video Input 4 channel video input
Support up to:
4 CVBS
Or 1 CVBS + 1 YPbPr/RGB(embedded sync)
Or 1 CVBS + 1 YPbPr/RGB(embedded sync)
Or 2 CVBS + 1 S-Video
Or 2 S-Video
CVBS supports NTSC/PAL/SECAM
SD Slot MMC/SD/SDIO/SDHC slot, support up to 32GByte
FRAM 64KBit high speed F-RAM with virtually unlimited writing cycle
Security Hardware security-dog for hardware & software protection
RTC CR1220 RTC battery socket
Button 1x Side button (user interrupt)
1x Reset button (inside)
1x PowerON button (inside)
LED LED 2x Power LED
2x Power management unit LED
2x GPIO LED
Boot switch 1x 6Bit boot mode switch
Power 1x 5V 4A DC Jack
1x 5V 4A TJC3 connector
1x Battery module connector
1x Power management signal connector
Expansion connectors 1x 3.3V I2C port
1x 3.3V LCD interface with touch screen support
1x 1.8V SPI port
1x 1.8V SDIO expansion for WIFI module
1x 1.8V 6x6 scanning keypad connector
1x 1.8V GPIO expansion
1x 1.8V GPMC High speed bus expansion
1x 1.8V Digital camera interface


Operating conditions

Conditions Min Normal Max
Power supply 5V 0.3A 5V 0.5A(mark 1) 5V 4A(mark 2)
power consumption 1.5W 2.5W(mark 1) 20W(mark 2)
Temperature(Commercial) 0°C / 70°C
Temperature(Industrial) -40°C / 0°C

Mark 1:The value is the average detected in the condition that CPU running at full speed in 600MHz working condition, other circuit in a working conditon, and does not access other modules, USB interface don’t in working condition.
Mark 2:The value is the average detected in the condition that 4 USB interface supply Power, and the board connected to the LCD module, digital camera, WIFI and other cases, etc.


Loading...




EMA logo.png