eLinux.org - Changes related to "RPi Hub" [en]

FR:RPi Hub

2013-05-24T20:42:47Z

‎Dépannage

Rpi Camera Module

2013-05-24T15:45:08Z

Link to forum post

RPi Community

2013-05-24T15:36:09Z

Region added

Rpi Camera Module

2013-05-24T14:12:08Z

‎Known Issues: -? and -n don't currently work

RPi VerifiedPeripherals

2013-05-24T06:17:57Z

update Futronic Fingerprint scanner - libScanApi example modified to print error message

FR:RPi Hub

2013-05-23T19:36:59Z

up-to-date. source: 21:45, 22 May 2013‎

RPi VerifiedPeripherals

2013-05-23T18:51:37Z

‎Working USB Wi-Fi Adapters:

RPi VerifiedPeripherals

2013-05-23T18:44:06Z

‎Working USB Wi-Fi Adapters:

RPi Expansion Boards

2013-05-23T13:50:26Z

FR:RPi Hub

2013-05-23T13:15:33Z

Changement de titre de page

RPi Distributions

2013-05-23T13:01:26Z

‎Comparison: Versions and Links update

RPi Buying Guide

2013-05-23T12:28:26Z

typo

FR:RPi Hub

2013-05-23T12:22:40Z

‎Expéditions aux clients: Ajout d'un lien vers Snootlab

Rpi Camera Module

2013-05-23T11:48:09Z

Add references

Show changes

RPi Expansion Boards

2013-05-22T23:55:08Z

edit link

RPi VerifiedPeripherals

2013-05-22T23:51:34Z

edit links

Rpi Camera Module

2013-05-22T22:09:32Z

First draft of a page for the camera module

New page

[[Category: RaspberryPi]]
{{Template:RPi_Hardware}}

==Introduction==

The Raspberry Pi Camera board was released for sale on 14/05/2013. It contains a 5MPixel sensor and connects via a ribbon cable to the CSI connector on the board.

==Sample Programs==

Sample programs using the camera for taking stills and video have been developed by the Foundation and the source for these is available on [https://github.com/raspberrypi/userland/tree/master/host_applications/linux/apps/raspicam github].

Forum user M1M1 published instructions on compiling the sample programs [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=43&t=43990#p350970 here]

The command line parameters for the programs are as follows:
<pre>
RaspiVid Camera App
===================

Display camera output to display, and optionally saves an H264 capture at requested bitrate

usage: RaspiVid [options]

Image parameter commands

‐?, ‐‐ help : This help information
‐w, ‐‐ width : Set image width <size>. Default 1920
‐h, ‐‐ height : Set image height <size>. Default 1080
‐b, ‐‐ bitrate : Set bitrate. Use bits per second (e.g. 10MBits/ s would be ‐ b 10000000)
‐o, ‐‐ output : Output filename <filename> (to write to stdout, use '‐o ‐ ')
‐v, ‐‐ verbose : Output verbose information during run
‐t, ‐‐ timeout : Time (in ms) before takes picture and shuts down. If not specified, set to 5s
‐d, ‐‐ demo : Run a demo mode (cycl e through range of camera options, no capture)
‐fps, ‐‐ framerate : Specify the frames per second to record
‐e, ‐‐ penc : Display preview image *after* encoding (shows compression artifacts)

Preview parameter commands

‐p, ‐‐ preview : Preview window settings <'x,y,w,h'>
‐f, ‐‐ fullscreen : Fullscreen preview mode
‐n, ‐‐ nopreview : Do not display a preview window

Image parameter commands

‐sh, ‐‐ sharpness : Set image sharpness ( ‐100 to 100)
‐co, ‐‐ contrast : Set image contrast ( ‐100 to 100)
‐br, ‐‐ brightness : Set image brightness (0 to 100)
‐sa, ‐‐ saturation : Set image saturation ( ‐100 to 100)
‐ISO, ‐‐ ISO : Set capture ISO
‐vs, ‐‐ vstab : Turn on video stablisation
‐ev, ‐‐ ev : Set EV com pensation
‐ex, ‐‐ exposure : Set exposure mode (see Notes)
‐awb, ‐‐ awb : Set AWB mode (see Notes)
‐ifx, ‐‐ imxfx : Set image effect (see Notes)
‐cfx, ‐‐ colfx : Set colour effect (U:V)
‐mm, ‐‐ metering : Set metering mode (see Notes)
‐rot, ‐‐ rotation : Set image rotation (0 ‐359)
‐hf, ‐‐ hflip : Set horizontal flip
‐vf, ‐‐ vflip : Set vertical flip

Notes

Exposure mode options :
off,auto,night,nightpreview,backlight,spotlight,sports,snow,beach,verylong,fixedfps,antishake,fireworks

AWB mode options :
off,auto,sun,cloud,shade,tungsten,fluorescent,incandescent,flash,horizon

Image Effect mode options :
none,negative,solarise,sketch,denoise,emboss,oilpaint,h atch,gpen,pastel,watercolour,film,blur,saturation,col
ourswap,washedout,posterise,colourpoint,colourbalance,cartoon

Metering Mode options :
average,spot,backlit,matrix
</pre>

<pre>
RaspiStill Camera App
=====================

Runs camera for specific time, and take JPG capture at end if requested

usage: RaspiStill [options]

Image parameter commands

‐?, ‐‐ help        : This help information
‐w, ‐‐ width     : Set image width <size>
‐h, ‐‐ height      : Set image height <size>
‐q, ‐‐ quality     : Set jpeg quality <0 to 100>
‐r, ‐‐ raw         : Add raw bayer data to jpeg metadata
‐o, ‐‐ output      : Output filename <filename> (to write to stdout, use '‐o ‐ '). If not specified, no file is saved
‐v, ‐‐ verbose    : Output verbose information during run
‐t, ‐‐ timeout    : Time (in ms) before takes picture and shuts down (if not specified, set to 5s)
‐th, ‐‐ thumb      : Set thumbnail parameters (x:y:quality)
‐d, ‐‐ demo       : Run a demo mode (cycle through range of camera options, no capture)
‐e, ‐‐ encoding    : Encoding to use for output file (jpg, bmp, gif, png)
‐x, ‐‐ exif       : EXIF tag to apply to captures (forma t as 'key=value')
‐tl, ‐‐ timelapse          : Timelapse mode. Takes a picture every <t>ms

Preview parameter commands

‐p, ‐‐ preview    : Preview window settings <'x,y,w,h'>
‐f, ‐‐ fullscreen          : Fullscreen preview mode
‐n, ‐‐ nopreview : Do not display a preview window

Image parameter commands

‐sh, ‐‐ sharpness         : Set image sharpness ( ‐100 to 100)
‐co, ‐‐ contrast : Set imag e contrast ( ‐100 to 100)
‐br, ‐‐ brightness        : Set image brightness (0 to 100)
‐sa, ‐‐ saturation        : Set image saturation ( ‐100 to 100)
‐ISO, ‐‐ ISO      : Set capture ISO
‐vs, ‐‐ vstab     : Turn on video stablisation
‐ev, ‐‐ ev         : Set EV com pensation
‐ex, ‐‐ exposure : Set exposure mode (see Notes)
‐awb, ‐‐ awb      : Set AWB mode (see Notes)
‐ifx, ‐‐ imxfx    : Set image effect (see Notes)
‐cfx, ‐‐ colfx     : Set colour effect (U:V)
‐mm, ‐‐ metering : Set metering mode (see Notes)
‐rot, ‐‐ rotation         : Set image rotation (0 ‐359)
‐hf, ‐‐ hflip      : Set horizontal flip
‐vf, ‐‐ vflip      : Set vertical flip

Notes

Exposure mode options :
off,auto,night,nightpreview,backlight,spotlight,sports,snow,beach,verylong,fixedfps,antishake,fireworks

AWB mode options :
off,auto,sun,cloud,shade,tungsten,fluorescent,incandescent,flash,horizon

Image Effect mode options :
none,negative,solarise,sketch,denoise,emboss,oilpaint,h atch,gpen,pastel,watercolour,film,blur,saturation,col
ourswap,washedout,posterise,colourpoint,colourbalance,cartoon

Metering Mode options :
average,spot,backlit,matrix
</pre>
==Known Issues==

* It is believed that still captures are not using the full sensor.
* Some users have noted that images are 'flipped', this can be corrected by use of the -hf and -vf command line flags. This behaviour may be addressed in future foundation releases.
* Correct EXIF data (including user supplied tags) are not being written to the output files.
==Troubleshooting==

RPi Hub

2013-05-22T21:45:41Z

Added an entry describing the camera module inclduing a link to a stub page

RPi Distributions

2013-05-22T18:25:38Z

FR:RPi Hub

2013-05-20T23:27:01Z

‎Configuration de base:

RPi applications

2013-05-20T20:22:38Z

RPiconfig

2013-05-20T14:14:38Z

‎Overclocking options:

RPi Distributions

2013-05-20T11:07:51Z

uppdatera

FR:RPi Hub

2013-05-20T09:56:48Z

‎Désormais livrés aux clients:

RaspberryPi Boards

2013-05-19T17:37:47Z

RPi VerifiedPeripherals

2013-05-19T14:41:45Z

Updated WIFI adapters, Patriot Memory PCBOWAU2-N now works plug and play in 2013-02-09 Raspbian, also fixed broken link for Patriot Memory PCUSBW1150

RPi Expansion Boards

2013-05-19T06:44:09Z

Adjust link

RPi Cases

2013-05-19T00:14:18Z

updated acme reseller link

RPi VerifiedPeripherals

2013-05-18T16:07:39Z

‎Working Bluetooth adapters:

FR:RPi Hub

2013-05-18T15:25:34Z

‎À propos:

RPi Distributions

2013-05-18T14:22:02Z

RPi VerifiedPeripherals

2013-05-18T13:45:35Z

‎Working USB Keyboards: - SolidTek

FR:RPi Hub

2013-05-18T13:43:19Z

‎Projets, Guides et Tutoriels:

@@ Line 52: / Line 52: @@
 * Après le premier démarrage en particulier, il est important de faire un arrêt propre avec la commande '''sudo halt'''.
-* '''Des problèmes ? Essayez la page [[R-Pi_Troubleshooting | Dépannage]].'''
+* '''Des problèmes ? Essayez la page [[FR:R-Pi_Troubleshooting | Dépannage]].'''
 | style="width:33%; vertical-align:top; border:1px solid #aaa;" |
@@ Line 121: / Line 121: @@
 === Dépannage ===
-Rendez-vous sur la [[R-Pi Troubleshooting|page de dépannage]] pour de l'aide sur comment résoudre les problèmes les plus courants.
+Rendez-vous sur la [[FR:R-Pi Troubleshooting|page de dépannage]] pour de l'aide sur comment résoudre les problèmes les plus courants.
 === Bogues ===

@@ Line 104: / Line 104: @@
 * [https://plus.google.com/107182636490355951240/posts Google Plus]
 * ''[[Raspberry Jam]]s''
 == Other Pages ==

@@ Line 2,692: / Line 2,692: @@
 * TEMPer1 (id: 0c45:7401)
 ** works out of the box on raspbian/wheezy with [https://github.com/petervojtek/usb-thermometer pcsensors library]
 == PS2 / AT to USB Converters ==

@@ Line 88: / Line 88: @@
 * L'unité gèrera toute une gamme de [[RPi VerifiedPeripherals|composants, périphériques et accessoires]].
 * Les [[Rpi Low-level peripherals|interfaces bas-niveau]] permettent l'utilisation de [[RPi Expansion Boards|cartes d'extension]] optionnelles pour une grande variété de projets.
 * Des connexions sont aussi possibles via le [[RPi_Serial_Connection|port série]] intégré.
 * Pour des problématiques plus avancées, voir [[RPi Advanced Setup|Configuration avancée]].

@@ Line 1,706: / Line 1,706: @@
 * '''ZyXEL'''
 ** [http://www.element14.com/community/message/50015#50015/l/re-installing-kernel-headers-on-the-pi NWD2105] USB ID: 0586:341e, RT3070 chipset, rt2800usb driver (B)
 ** [http://www.zyxel.com/products_services/g_202.shtml G-202] model 0586:3410 ZyXEL Communications Corp. ZyAIR G-202 802.11bg using zd1211rw kernel module and zd1211-firmware package

@@ Line 146: / Line 146: @@
 * Correct EXIF data (including user supplied tags) are not being written to the output files.
 * The -? (--help) and -n (--nopreview) command-line options currently don't work, but should be fixed in a future release of the camera apps.
 ==Troubleshooting==

@@ Line 1,575: / Line 1,575: @@
 * '''GMYLE'''
 **  Wireless 11n USB Adapter. Uses RTL8188CUS chipset - cheap on eBay. Installs and works using the install-rtl8188cus-latest.sh script.
 * '''Hawking'''

@@ Line 153: / Line 153: @@
 ====Piface====
 [http://piface.openlx.org.uk Piface] is simpler than the [[RPi Gertboard]] (it's aimed at less experienced users), but also intended to connect to PCs and Android to be platform agnostic
 ==== Pi Plates ====

@@ Line 28: / Line 28: @@
 === Historique ===
-Si vous voulez savoir pourquoi le Raspberry Pi a été créé, et pourquoi il est tel qu'il est, veuillez visiter la page [[RPi General History|Historique Général]] qui fait la lumière sur les événements marquants de son histoire. Il ne s'agit pas d'un historique détaillé et il peut donc être lu rapidement. Vous pouvez également consulter la page des [[Rpi_HardwareHistory | modifications de conception]] sur la façon dont le Raspberry Pi a évolué et la page [[RaspberryPi_Boards | différences de fabrication]] qui peut vous aider si vous rencontrez des difficultés avec votre carte.
+Si vous voulez savoir pourquoi le Raspberry Pi a été créé, et pourquoi il est tel qu'il est, veuillez visiter la page [[Histoire résumée de RPi|Historique Général]] qui fait la lumière sur les événements marquants de son histoire. Il ne s'agit pas d'un historique détaillé et il peut donc être lu rapidement. Vous pouvez également consulter la page des [[Rpi_HardwareHistory | modifications de conception]] sur la façon dont le Raspberry Pi a évolué et la page [[RaspberryPi_Boards | différences de fabrication]] qui peut vous aider si vous rencontrez des difficultés avec votre carte.
 == Bien démarrer ==

@@ Line 228: / Line 228: @@
 |-
 | [http://openelec.tv/component/k2/item/235-openelec-on-raspberry-pi-our-first-arm-device-supported OpenELEC]
-| 2013-03-25 (3.0.0)
+| 2013-05-17 (3.0.3)
 | 2012-05-10
 | Linux 3.6.11 (embedded)
 | [http://www.opensource.org/licenses/index.html OSI mixed] (GPLv2 BSD etc)
-| 85 MiB (inc. XBMC)
+| 88 MiB (incl. XBMC)
 | {{yes}}
-| [http://wiki.openelec.tv/index.php?title=Installing_OpenELEC_on_Raspberry_Pi install instructions]<br />
+| [http://www.openelec.tv/get-openelec/download/viewcategory/10-raspberry-pi-builds - Official Downloadsite]<br />
-[http://openelec.tv/component/k2/item/241-openelec-meets-raspberry-pi-part-1 build instructions - part 1]<br />[http://openelec.tv/component/k2/item/242-openelec-meets-raspberry-pi-part-2 build instructions - part 2]<br />[http://sources.openelec.tv/tmp/image/openelec-rpi/ official builds]<br />[http://sparky0815.de/openelec-download-images-fat-files/ raw image (unofficial)]
+[http://wiki.openelec.tv/index.php?title=Installing_OpenELEC_on_Raspberry_Pi - Install instructions]<br />
 | [https://github.com/OpenELEC/OpenELEC.tv/tree/master/packages ~{{formatnum:140}}] (+ [http://wiki.openelec.tv/index.php?title=OpenELEC_Addons_(official) 7] via xbmc)
 | root:openelec<br/>(ssh only)

@@ Line 10: / Line 10: @@
 Countries that are currently subject to UK (including EU and UN) export restrictions include North Korea, Iran, Ivory Coast, Liberia and Zimbabwe. A full list and further details are provided at [http://www.businesslink.gov.uk/bdotg/action/layer?topicId=1084100244]
-Farnell have also been refusing to sell direct to some consumers in the EU, to the best of my knowlage they have not given full details of why.
+Farnell have also been refusing to sell direct to some consumers in the EU, to the best of my knowledge they have not given full details of why.
 There are three main options for buying a Raspberry Pi, buying direct from the distributor, buying from a subsidary or sister company of the distributor or buying from a third party reseller which option is best will depend on the location of the customer, the number of Raspberry Pi's being purchased, and the urgency of the order.

← Older revision		Revision as of 12:22, 23 May 2013
Line 5:		Line 5:
	== Expéditions aux clients ==		== Expéditions aux clients ==

−	'''Mise à jour des délais de livraison en date du 22 mars 2013 : ''' Le délai de livraison est d'environ 2 semaines pour Farnell et de 4 semaines pour RS. [http://thepihut.com/ The Pi Hut] ~~dispose~~ de Raspberry Pi disponibles pour distribution immédiate	+	'''Mise à jour des délais de livraison en date du 22 mars 2013 : ''' Le délai de livraison est d'environ 2 semaines pour Farnell et de 4 semaines pour RS. [http://snootlab.com/raspberry-pi/321-raspberry-pi-pcb-b-512-mb.html Snootlab (fr)] et [http://thepihut.com/ The Pi Hut (en)] disposent de Raspberry Pi disponibles pour distribution immédiate

@@ Line 193: / Line 193: @@
 ==== Quick2Wire GPIO Expansion Board ====
-[http://quick2wire.com Quick2Wire GPIO board and experimenters kit] is an extension board for the Raspberry Pi that has level converters to allow the driving of TTL and real world devices such as LED's and switches.  It will also provide an experimenters kit, a software framework and a number of tutorials.
+[http://quick2wire.com Quick2Wire GPIO board and experimenters kit] is an extension board for the Raspberry Pi that has level converters to allow the driving of TTL and real world devices such as LED's and switches.  It will also provide an experimenters kit, a software framework and a number of tutorials. The Quick2Wire kits are also available from [http://www.pi-supply.com Pi Supply].
 ==== Raspberry Pi IO Interface ====

@@ Line 2,717: / Line 2,717: @@
 Pi Supply offers a 5.25V (+-0.25v) 1500mA power supply, manufactured specially for the Raspberry Pi to account for voltage drop due to the high current draw of the Raspberry Pi when compared to typical (phone charging etc.) duties. This is available in four varieties :
-* [http://www.pi-supply.com/ UK]
+* [http://www.pi-supply.com/product/uk-micro-usb-raspberry-pi-power-supply-5v-1500ma/ UK]
-* [http://www.pi-supply.com/ EU]
+* [http://www.pi-supply.com/product/european-eu-micro-usb-raspberry-pi-power-supply-5v-1500ma/ EU]
-* [http://www.pi-supply.com/ USA]
+* [http://www.pi-supply.com/product/american-usa-micro-usb-raspberry-pi-power-supply-5v-1500ma/ USA]
-* [http://www.pi-supply.com/ AUS]
+* [http://www.pi-supply.com/product/australian-aus-micro-usb-raspberry-pi-power-supply-5v-1500ma/ AUS]
 The Pi Hut offers a 5V 1500mA power supply, manufactured specially for the Raspberry Pi. This is available in three varieties :
@@ Line 2,839: / Line 2,839: @@
 ** Switching Power Supply. Model: PSAC09R-050. Output: 5&nbsp;V, 1.8&nbsp;A, microUSB.  [http://www.digikey.com/product-detail/en/PSAC09R-050/993-1109-ND/2635771 Digi-key Link]
 * '''Pi Supply'''
-** [http://www.pi-supply.com/ 5.25V 1.5A Raspberry Pi USB Power Supply] Comes in 4 varieties for worldwide compatibility - UK, European (EU), American (USA) and Australian (AUS). Is of the detachable USB type so can double up as iPhone/Smartphone charger.
+** [http://www.pi-supply.com/product-category/raspberry-pi-power-supplies/ 5.25V 1.5A Raspberry Pi USB Power Supply] Comes in 4 varieties for worldwide compatibility - UK, European (EU), American (USA) and Australian (AUS). Is of the detachable USB type so can double up as iPhone/Smartphone charger.
 * '''PortaPow'''
 ** PortaPow UK Mains Wall Power Supply

@@ Line 99: / Line 99: @@
 * The unit will support a range of [[RPi VerifiedPeripherals|devices, peripherals and accessories]].
 * The [[Rpi Low-level peripherals|Low-level interfaces]] allow the use of optional [[RPi Expansion Boards|Expansion Boards]] in a wide range of projects.
 * You can also connect via the built-in [[RPi_Serial_Connection|serial port]]
 * For more advanced issues including see [[RPi Advanced Setup|Advanced Setup]].

← Older revision	Revision as of 18:25, 22 May 2013
(One intermediate revision by one user not shown)

@@ Line 45: / Line 45: @@
 ----
 Les premiers  petits pas du Raspberry Pi...
-* Assurez-vous d'avoir tout l'[[RPi Hardware Basic Setup#Typical_Hardware_You_Will_Need|équipement]] dont vous avez besoin pour démarrer avec votre Raspberry Pi.
+* Assurez-vous d'avoir tout l'[[FR:RPi Hardware Basic Setup#Matériel_courant_dont_vous_aurez_besoin|équipement]] dont vous avez besoin pour démarrer avec votre Raspberry Pi.
-* Familiarisez-vous avec le [[RPi Hardware Basic Setup#Connecting_Together | schéma de la carte et la connectique]] pour être prêt à tout brancher.
+* Familiarisez-vous avec le [[FR:RPi Hardware Basic Setup#Branchements | schéma de la carte et la connectique]] pour être prêt à tout brancher.
 * Si une carte SD pré-installée n'a pas été fournie, vous devrez en préparer une avec le [[RPi_Easy_SD_Card_Setup | système d'exploitation]] de votre choix.
 * Si vous n'utilisez pas un moniteur HDMI, vous aurez peut-être besoin de configurer le mode vidéo correct en éditant le fichier texte [[RPiconfig]] sur la carte SD.

@@ Line 2: / Line 2: @@
 === Additional apt Sources ===
-*[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=30&t=19349 Open Monitoring Distrbution] (Nagios, Shinken, NagVis, PNP, Thruk, DokuWiki, check_mk, mod_gearman)
+*[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=30&t=19349 Open Monitoring Distribution] (Nagios, Shinken, NagVis, PNP, Thruk, DokuWiki, check_mk, mod_gearman)
 *[[RPi_XBMC#3rd_party_apt_source | XBMC]]
 *[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=56&t=15793 open media vault]
 *[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=6096 webmin]
 *[http://maniactwister.de/b/aazlvr/en Dionaea]
-*[http://wiki.linuxaudio.org/wiki/raspberrypi#audio_software_repository JACK]
+*[http://rpi.autostatic.com/ Raspbian audio software repository]
 === Raspberry Pi Software Application Notes ===

@@ Line 405: / Line 405: @@
 |-
 !align="right"|avoid_pwm_pll
-| Unlink core_freq from the rest of the gpu. Can cause low quality analog audio, which should be fixed with latest firmware. Default 0
+| Don't dedicate a pll to PWM audio. This will reduce analogue audio quality slightly. The spare PLL allows the core_freq to be set independently from the rest of the gpu allowing more control over overclocking. Default 0
 |-
 !align="right"|sdram_freq
@@ Line 411: / Line 411: @@
 |-
 !align="right"|over_voltage
-| ARM/GPU core voltage adjust. [-16,8] equates to [0.8V,1.4V] with 0.025V steps. force_turbo will allow values higher than 6. Default 0 (1.2V) <ref name=voltages>What this means is that you can specify -16 and expect about 0.8V as the GPU/core voltage. This is 0.4V below the normal value of 1.2. If you specify 16, you'd get 0.4V ABOVE the normal value of 1.2V, or 1.6V. The fact that someone carefully specified "8" and "1.4V" as the upper limit in the examples leads me to think that it is likely to shorten the life of your raspberry pi significantly if you would specify values above "8".  So: don't specify values above zero, but if you do, don't go above 8.</ref>
+| ARM/GPU core voltage adjust. [-16,8] equates to [0.8V,1.4V] with 0.025V steps. <ref name=voltages>What this means is that you can specify -16 and get 0.8V as the GPU/core voltage, and specify 8 and get 1.4V</ref> Default is 0 (1.2V). Values above 6 are only allowed when force_turbo or current_limit_override are specified (which set the warranty bit)
 |-
 !align="right"|over_voltage_sdram
@@ Line 426: / Line 426: @@
 |-
 !align="right"|force_turbo
-| Disables dynamic cpufreq driver and minimum settings below. Enables h264/v3d/isp overclock options. Default 0
+| Disables dynamic cpufreq driver and minimum settings below. Enables h264/v3d/isp overclock options. Default 0. May set warranty bit.
 |-
 !align="right"|initial_turbo
@@ Line 447: / Line 447: @@
 |-
 !align="right"| current_limit_override
-| Disables SMPS current limit protection when set to "0x5A000020". Can help if you are currently hitting a reboot failure when overclocking too high. <ref name=current_limit_override>http://www.raspberrypi.org/phpBB3/viewtopic.php?f=29&t=6201&start=325#p170793</ref>
+| Disables SMPS current limit protection when set to "0x5A000020". Can help if you are currently hitting a reboot failure when overclocking too high. May set warrany bit.<ref name=current_limit_override>http://www.raspberrypi.org/phpBB3/viewtopic.php?f=29&t=6201&start=325#p170793</ref>
 |}

@@ Line 396: / Line 396: @@
 ==BerryTerminal==
 BerryTerminal is a minimal Linux distribution designed to turn the Raspberry Pi mini computer into a low-cost thin client.
- It allows users to login to a central Edubuntu or other LTSP server, and run applications on the central server
+It allows users to login to a central Edubuntu or other LTSP server, and run applications on the central server
 *[http://www.berryterminal.com/doku.php Main Site]
 *[http://dl.berryboot.com/berryterminal-20130321.zip Download]
@@ Line 404: / Line 404: @@
 [http://www.geexbox.org/category/arm/ http://www.geexbox.org/category/arm/]
 ==DarkElec==
 None of the currently available solutions do a perfect job with running XBMC on the Pi, however OpenELEC comes by far the closest, in spite of its locked down nature.

@@ Line 3: / Line 3: @@
 {{Template:Hub_Flags}} <!-- please edit template to alter banner and flag display on all hubs -->
-== Désormais livrés aux clients ==
+== Expéditions aux clients ==
 '''Mise à jour des délais de livraison en date du 22 mars 2013 : ''' Le délai de livraison est d'environ 2 semaines pour Farnell et de 4 semaines pour RS. [http://thepihut.com/ The Pi Hut] dispose de Raspberry Pi disponibles pour distribution immédiate
 Voir le [[RPi Buying Guide|Guide d'achat]] pour la façon d'en commander un, ou se rendre sur la [http://www.raspberrypi.org Page d'Accueil de la Fondation Raspberry Pi]
 == À propos ==

@@ Line 1,027: / Line 1,027: @@
 * Quake 3 crashes and reboots near instantly after rendering the arena when overclocked (Turbo)
 * Prone to SD card (SDHC 4 GB Class 4) corruption after a force halt when overclocked (High+)
+| [[File:RPi-BH1310-Front_BrianXP7.jpg|100px|thumb|center]]
+| [[File:RPi-BH1310-Back_BrianXP7.jpg|100px|thumb|center]]
 | Allied Electronics (US)
 | [[User:BrianXP7|BrianXP7]]
 |-}

@@ Line 1,622: / Line 1,622: @@
 * '''Patriot Memory'''
-** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter  (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered USB hub.
+** [http://www.patriotmemory.com/product/detail.jsp?prodline=6&catid=97&prodgroupid=163&id=1198&type=24 PCUSBW1150] Wireless 11N USB adapter  (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered USB hub.
-** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter  (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module
+** [http://www.patriotmemory.com/product/detail.jsp?prodline=6&catid=97&prodgroupid=163&id=973&type=24 PCBOWAU2-N] Wireless 11N USB adapter  (uses Realtek RTL8191SU chip) Worked immedietly, plug and play in 2013-02-09 Raspbian via powered USB hub.
 * '''Ralink'''

@@ Line 247: / Line 247: @@
 ==== RFM12Pi - Wireless OpenEnergyMonitor Base-station ====
 Add's RFM12B wireless (868/433/912Mhz) RF transceiver capability to the Raspberry Pi. The RFM12pi has got an-board ATtiny84 microcontroller pre-loaded with firmware to decode RFM12B packets from [http://jeelabs.org JeeNode] and [http://openenergymonitor.org OpenEnergyMonitor] sensor modules onto Raspberry Pi's internal serial UART. Designed to be used with [http://emoncms.org emoncms] running on a Raspberry Pi web-server to make a low power energy, temperature and other environmental data logging and visualisation server. Developed as part of the [http://openenergymonitor.org openenergymonitor.org] project. For more info see [http://openenergymonitor.blogspot.com/2012/11/raspberry-pi-emonbase.html introductory blog] post, [http://openenergymonitor.org/emon/emonbase/raspberrypi overview documentation page] and [http://wiki.openenergymonitor.org/index.php?title=Raspberry_Pi technical documentation wiki].
 ==Expansion boards by manufacturer==

@@ Line 649: / Line 649: @@
 Europe customers: [http://www.myraspibox.com/ myraspibox store] Price: 6.00€ to 7.00€
-USA customers: [https://store.acmeun.com/ USA reseller store] Price: $7.50
+USA customers: [https://store.acmeun.com/ USA reseller store - Acme Unlimited] Price: $7.50
 {{clear}}

@@ Line 1,766: / Line 1,766: @@
 * IOGear GBU321 (Broadcom BCM2045 Chipset)
 ** Works with Raspbian Wheezy directly attached to Raspberry Pi and via powered USB hub.
 * Trust BT-2400p
 ** Working well with Raspbian Wheezy directly attached to Raspberry Pi. Using with sma-Bluetooth (SMA Solar Inverter reading software).
@@ Line 1,780: / Line 1,781: @@
 ** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.
 ** [http://dx.com/p/super-mini-bluetooth-2-0-adapter-dongle-vista-compatible-11866 Super Mini Bluetooth 2.0 Dongle]. The device is recognized and after installing bluez-firmware you can bring it up with hcitool hci0 up. However whenever you try to pair with any device it will cause kernel panic and lock up the system. Confirmed on Raspbian, RaspBMC. The device is a counterfeit Cambridge Silicon Radio device, probably with several bugs in it causing lockups.
-* Asus USB-BT211
+* '''Asus USB-BT211'''
 ** Shows up as HCI device in Raspbian, but it does not scan or pair.
 ** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962
 == USB Ethernet adapters ==

@@ Line 19: / Line 19: @@
 * Obtenez les dernières informations depuis la [http://www.raspberrypi.org page d'accueil de la Fondation Raspberry Pi], le [http://twitter.com/intent/user?screen_name=Raspberry_Pi fil Twitter] ou dans les [http://www.raspberrypi.org/forum/general-discussion/news-articles-and-blog-posts-about-raspberry-pi forums].
-* Pour les questions les plus fréquemment posées sur le Raspberry Pi, voyez la [[RPi FAQ|section FAQ]] ou la page [http://www.raspberrypi.org/?page_id=8 FAQ de la Fondation Raspberry Pi].
+* Pour les questions les plus fréquemment posées sur le Raspberry Pi, voyez la [[FR:RPi FAQ|section FAQ]] ou la page [http://www.raspberrypi.org/?page_id=8 FAQ de la Fondation Raspberry Pi].
 * Les deux fabricants partenaires disposent de communautés pour des discussions à vocation plus technique, des articles, FAQ et informations :
 :* Premier Farnell : [http://www.element14.com/community/groups/raspberry-pi?view=discussions Groupe Raspberry Pi Element 14]

@@ Line 394: / Line 394: @@
 *[http://rpitc.blogspot.se/ Homepage]
 *[http://rpitc.blogspot.se/p/download.html Dowload]
 ==GeeXboX ARM==
@@ Line 489: / Line 494: @@
 This debian squeeze image created to perform "pwn plug" type of attacks using Raspberry pi.
 pleas look at the wiki for further details [https://sourceforge.net/p/ha-pi/wiki/Home/ Wiki]
 ==Bodhi==

@@ Line 1,082: / Line 1,082: @@
 ** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B)
-*'''SolidTek'''
+*'''[http://www.solidtekusa.com/ SolidTek]'''
-** Solid Tek KB-P3100BU ASK-3100U.
+** SolidTek KB-P3100BU ASK-3100U.
 *'''Sony'''

@@ Line 150: / Line 150: @@
 *Des tâches usuelles et des astuces utiles se trouvent sur la [[FR:RPi Guides | page Guides]].
 *Des projects peuvent être trouvés, et ajoutés, sur la [[RPi Projects |page Projets]].
-*Les fiches techniques du Raspberry Pi sont sur la [[RPi DatasheetCategories |page Fiches techniques]].
+*Les fiches techniques du Raspberry Pi sont sur la [[FR:RPi DatasheetCategories |page Fiches techniques]].
 *Les utilisateurs compétents peuvent souhaiter consulter et contribuer aux éléments de la liste de souhaits des projets sur la [[RPi Tasks |page Tâches]].