eLinux.org - Changes related to "RPi MW-A" [en]

RPi VerifiedPeripherals

2013-06-18T22:14:49Z

‎Working USB Hubs

RPi VerifiedPeripherals

2013-06-18T14:53:01Z

add Trendnet TU2-ET100 device in Ethernet supported device

RPi VerifiedPeripherals

2013-06-18T13:58:54Z

‎USB Keyboards

RPi VerifiedPeripherals

2013-06-17T21:38:53Z

fix link

RPi VerifiedPeripherals

2013-06-14T01:36:16Z

Minor style change in problem USB ethernet adapters

@@ Line 543: / Line 543: @@
 |Not Verified
 | The high-power 4 A power adapter makes this a tempting purchase, but some users report problems connecting devices with a USB 3.0 hub. Since Pi can't benefit from USB 3.0, better off to use one of the Plugable USB 2.0 7 or 4 port hubs like USB2-HUB-AG7 to both power the Pi and attached USB devices.
 |- valign="top" align="left" style="background: #F5FAFF;"

@@ Line 1,821: / Line 1,821: @@
 * '''Sitecom'''
 ** Sitecom LN-030 V2 detected as ASIX AX88772 USB 2.0 Ethernet Adapter works out of the box. Doesn't seem to require any extra power supply.
 * '''A-Link'''
 ** A-Link NA1GU Gigabit USB 2.0 Ethernet adapter

@@ Line 786: / Line 786: @@
 ** Model AKB-410UB. Keyboard with Touchpad.
-* '''Apple'''    (Apple keyboards that have USB ports require an external powered hub to work, and do not work on the Raspberry Pi directly! Note: Apple keyboard works fine using the latest Raspberry Pi, even when connected directly (and with mouse connected))
+* '''Apple'''    (older Raspberry Pis may require a powered hub to work)
 ** [http://upload.wikimedia.org/wikipedia/commons/thumb/e/ea/Apple_iMac_Keyboard_A1243.png/800px-Apple_iMac_Keyboard_A1243.png Apple Keyboard with Numeric Keypad (aluminium/wired) A1243]
 ** [http://upload.wikimedia.org/wikipedia/commons/8/81/Apple_Keyboard_A1242.jpg Apple Keyboard (aluminium/wired) A1242]

@@ Line 2,738: / Line 2,738: @@
 The Raspberry Pi does not have a power on/off switch as standard (it does have a reset switch), however some add on boards have been developed to cater for this need.
 * '''Pi Supply'''
-** [http://www.pi-supply.com The Pi Supply Switch v1.1] is an on/off power switch for the Raspberry Pi which includes a hard on and off switch and a soft shutdown switch for the Pi, making it easy to manage power on your Pi. They were recently successfully funded on Kickstarter.<ref>[http://www.pi-supply.com/blog http://www.pi-supply.com/blog]</ref>
+** [http://www.pi-supply.com The Pi Supply Switch v1.1] is an [http://www.pi-supply.com/product/pi-supply-raspberry-pi-power-switch/ on/off power switch] for the Raspberry Pi which includes a hard on and off switch and a soft shutdown switch for the Pi, making it easy to manage power on your Pi. They were recently successfully funded on Kickstarter.<ref>[http://www.pi-supply.com/blog http://www.pi-supply.com/blog]</ref>
 == Power adapters ==

@@ Line 1,807: / Line 1,807: @@
 lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter
 * '''Apple'''
-** Apple USB Ethernet Adapter using asix kernel driver. Works out of the box on Raspbian, haven't tested on any other OS.
+** Apple USB Ethernet Adapter using <code>asix</code> kernel driver. Works out of the box (driver present since kernel 2.6.32). Doing OK using Apple USB charger and Pi's own USB port. USB register states that it draws max. 250 mA.
 * '''Edimax'''
 ** Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Works out of the box. Needs its own power source.
@@ Line 1,832: / Line 1,832: @@
 ===Problem Ethernet adapters===
-* Axago
+* '''Axago'''
 ** Axago ADE-X1 10/100 Ethernet Adapter (USB: 9710:7830 driver:mcs7830). Adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. Needed to unplug and plug USB again. Tested with and without powered USB hub. dmesg error: NETDEV WATCHDOG: eth1 (MOSCHIP usb-ethernet driver): transmit queue 0 timed out
-* Davicom / Kontron
+* '''Davicom / Kontron'''
-** Kontron DM9601  (USB: 0fe6:9700) Cost $5 on Ebay, works OK with Dell laptop under WinXP & Debian. While it is advertised as USB 2.0, actually it is a USB 1.1 device, thus, its throughput is limited to 12 Mbps. Check with lsusb -v, field ''bcdUSB''. Adaptor works on boot on R-Pi model A well enough for ping and NTP, but then crashes with "Kernel Bug at net/core/skbuff.c:127" immediately when file transfer begins.  TP1-TP2 voltage measured solid at 4.92 V. See also http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=39567&p=325003#p325003  The Linux DM9601 Driver is reported to be the problem here: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=66&t=34557  so until driver is updated, do not bother with this device.
+** Kontron DM9601 (USB: 0fe6:9700) Cost $5 on Ebay, works OK with Dell laptop under WinXP & Debian. While it is advertised as USB 2.0, actually it is a USB 1.1 device, thus, its throughput is limited to 12 Mbps. Check with lsusb -v, field ''bcdUSB''. Adaptor works on boot on R-Pi model A well enough for ping and NTP, but then crashes with "Kernel Bug at net/core/skbuff.c:127" immediately when file transfer begins.  TP1-TP2 voltage measured solid at 4.92 V. See also http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=39567&p=325003#p325003  The Linux DM9601 Driver is reported to be the problem here: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=66&t=34557  so until driver is updated, do not bother with this device.
 == USB Sound Cards ==