eLinux.org - Changes related to "RPi Performance" [en]

RPi Expansion Boards

2013-05-17T21:50:33Z

Expanded description

R-Pi Troubleshooting

2013-05-17T18:59:49Z

Changed date of image for Hynix chip to work

RPi Screens

2013-05-17T17:28:01Z

TFT LCD Modules

RPi Programming

2013-05-17T12:55:49Z

added info re. iverilog

RPi SD cards

2013-05-17T12:11:47Z

corrected numbers after multiple runs for benchmark

RPi Distributions

2013-05-17T07:02:43Z

‎Available Distributions:

RPi VerifiedPeripherals

2013-05-16T20:54:48Z

‎Working USB Hubs: DUB-H7: It's recommended that the total power consumption of the connected USB devices should not exceed 2.4 A, or 12 W.

RPi Projects

2013-05-16T01:31:08Z

fix title, Raspberry Pi Internet Radio

RPi Low-level peripherals

2013-05-15T14:25:00Z

RPi Distributions

2013-05-15T01:46:41Z

removed RpiLinux

RPi VerifiedPeripherals

2013-05-14T21:49:08Z

added Logitech M187 wireless mini mouse to working section

RPi Hardware Basic Setup

2013-05-14T20:56:37Z

Moved Start up to centre of page

Show changes

RPi Utilities

2013-05-14T17:02:38Z

‎Web Interfaces:

RPi Community

2013-05-13T19:06:22Z

update : new issues

RPi Expansion Boards

2013-05-12T14:18:12Z

‎MyPiShop:

Show changes

RPi SD cards

2013-05-11T16:39:49Z

adding Sandisk and verbatim cards

@@ Line 26: / Line 26: @@
 ==== LedBorg ====
 [http://www.piborg.org/ledborg LedBorg] is an ultra bright RGB LED add on board for your Raspberry Pi. Capable of 27 colour combinations and controllable from either a GUI or the command line, it can also perform patterns.
-Small board which connects directly to the GPIO header.
+Small board which connects directly to the GPIO header, Light up your case to suit your mood or display status information.
 ====Meltwater's RGB LED Board====

@@ Line 49: / Line 49: @@
 *** start.elf amongst others
 ** Did you have admin rights when you used the SD-card writer software? Without it the software might go through the motions without actually doing anything!
-** Older images do not load boot code for revB boards with the Hynix chip.  Use release 2012-02-09 (?) or later.  (I observe a single blip on the green activity LED)
+** Older images do not load boot code for revB boards with the Hynix chip.  Use release 2013-02-09 (?) or later.  (I observe a single blip on the green activity LED)
 ** It is also possible that the image you are writing to the card is corrupt, as downloads do occasionally end up corrupted or truncated. You can check with a checksum utility to verify the integrity of the download.

← Older revision		Revision as of 17:28, 17 May 2013
Line 140:		Line 140:

	The old-style 2-line, 16-character LCD displays can be commonly controlled over UART, thus providing a cheap way to display values for sensors etc.<!-- This is almost certainly wrong. These displays come in I2C and parallel bus models. Check and post refs. -->		The old-style 2-line, 16-character LCD displays can be commonly controlled over UART, thus providing a cheap way to display values for sensors etc.<!-- This is almost certainly wrong. These displays come in I2C and parallel bus models. Check and post refs. -->
		+
		+	===TFT LCD Modules===
		+
		+	LCD Modules with SPI or a parallel interface, can be connected to the Raspberry Pi.
		+
		+	SPI displays is available in sizes from 1.8" to 2.8".
		+
		+	Parallel interface displays can be found in many sizes, usually up to 5". Parallel interfaces can be 8 or 16-bits wide.
		+
		+	'''Linux Framebuffer driver projects'''
		+	* https://github.com/notro/fbtft/wiki
		+	* http://www.whence.com/rpi/
		+
		+	'''Display Adapter kits'''
		+	* [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=64&t=43702 Raspberry PI LCD Adapter Kit for ITDB02 displays]
		+	* [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=59&t=40674 1.8inch TFT LCD + Switch Shield]

	==References==		==References==

@@ Line 87: / Line 87: @@
 * wvdial -- Dialer for Land-line, GSM, UMTS modems and other serial devices.
 * VHDL -- VHDL (VHSIC hardware description language) is a hardware description language used in electronic design automation to describe digital and mixed-signal systems such as field-programmable gate arrays and integrated circuits.
-* Verilog -- Verilog, standardized as IEEE 1364, is a hardware description language (HDL) used to model electronic systems. It is most commonly used in the design and verification of digital circuits at the register-transfer level of abstraction.
+* Verilog -- Verilog, standardized as IEEE 1364, is a hardware description language (HDL) used to model electronic systems. It is most commonly used in the design and verification of digital circuits at the register-transfer level of abstraction. icarus verilog (iverilog) is available at http://iverilog.icarus.com/ or apt-get install iverilog
 ==Uncategorised==

@@ Line 2,109: / Line 2,109: @@
 |Incyi 28 Jul 2012
 |-
-|style='background-color:#c00;'| nok
+|style='background-color:#0a0;'| ok
 |SanDisk
 |SDHC
@@ Line 2,115: / Line 2,115: @@
 |10
 |Extreme Pro
-|Works with updated kernel/firmware, stock debian6-19-04-2012 boots kernel but won't run init (mmc timeout waiting for interrupt)
+|Works with stock Arch Linux 2013-05-01
-|Perchrh 28 Apr 2012, Tiwipewo 27 May 2012
+|Perchrh 28 Apr 2012, Tiwipewo 27 May 2012, Perchrh 17 May 2013
 |-
 |style='background-color:#0a0;'| ok
@@ Line 3,129: / Line 3,129: @@
 |-
 |Transcend SDHC 32GB Class 10 (TS32GSDHC10E) || 20.3 || 15.3 || Debian Wheezy "Rasbpian" || Linux raspberrypi 3.1.9+ #242 PREEMPT Wed Aug 1 19:47:22 BST 2012 armv6l GNU/Linux || man:0x000074 oem:0x4a45 name:SDC   hwrev:0x1 fwrev:0x0
 |-
 |Sandisk Extreme Pro SDHC 16GB Class 10 UHS-I (SDSDXPA-016G-A75) ||21.6 ||21.7 || Debian Wheezy "Rasbpian" || Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux  ||

@@ Line 394: / Line 394: @@
 *[http://rpitc.blogspot.se/ Homepage]
 *[http://rpitc.blogspot.se/p/download.html Dowload]
 ==DarkElec==
@@ Line 658: / Line 663: @@
 These are other popular distributions that are often asked about for Raspberry Pi but are not available.
 ==Ubuntu==

@@ Line 371: / Line 371: @@
 |USB 2.0
 |7-Port
-|3.0&nbsp;A
+|2.4&nbsp;A
 |Verified
-|[http://www.misco.co.uk/product/94282/D-Link-7-Port-USB-Hub] Power USB slots can be used to power Raspberry Pi.
+|[http://www.dlink.com/us/en/home-solutions/connect/usb/dub-h7-7-port-usb-2-0-hub] Power USB slots can be used to power Raspberry Pi.
 |- valign="top" align="left" style="background: #F5FAFF;"

@@ Line 349: / Line 349: @@
 | vertical-align:top; border:1px solid #aaa;" |
 Ongoing
 <!-- Example List Item: (Please copy and do not remove for future reference)

← Older revision		Revision as of 14:25, 15 May 2013
Line 1,122:		Line 1,122:

	[[Media:Raspberry_Pi_I-O_viii.doc \| Raspberry_Pi_I-O_viii.doc]]		[[Media:Raspberry_Pi_I-O_viii.doc \| Raspberry_Pi_I-O_viii.doc]]
		+
		+	==SPI==
		+
		+	There is one SPI bus brought out to the header: [[RPi_SPI]]

	==MIPI CSI-2==		==MIPI CSI-2==

@@ Line 334: / Line 334: @@
+|
 | pi:raspberry
 | none
 |}
@@ Line 598: / Line 586: @@
 Maintained by [http://blog.sheasilverman.com Shea Silverman]
 * [http://blog.sheasilverman.com/pimame-raspberry-pi-os-download/ Main site]
 =Announced distributions=

@@ Line 1,303: / Line 1,303: @@
 ** M90 optical mouse
 ** M185 Wireless Mouse (B)
 ** M210 (part of the MK260 set) (B)
 ** M305 Wireless Mouse

@@ Line 9: / Line 9: @@
 ==Web Interfaces==
 * '''[[raspcontrol | Raspcontrol]]''' Gives information about a Raspberry Pi system at a glance (No longer under development).
 * '''[http://frozenmist.co.uk/downloads/berryio/ BerryIO]''' Shows system info and also allows control of GPIO ports, A/D and D/A controllers, LCD character displays and network interfaces.
 * '''[https://code.google.com/p/webiopi/ WebIOPi]''' Easily adaptable GPIO port control web interface.

← Older revision		Revision as of 19:06, 13 May 2013
Line 25:		Line 25:
	- Issue 05 - September 2012 - Available NOW -		- Issue 05 - September 2012 - Available NOW -
	- Issue 06 - October 2012 - Available NOW -		- Issue 06 - October 2012 - Available NOW -
		+	- Issue 07 - November 2012 - Available NOW -
		+	- Issue 08 - December 2012 - Available NOW -
		+	- Issue 09 - February 2013 - Available NOW -
		+	- Issue 10 - March 2013 - Available NOW -
		+	- Issue 11 - April 2013 - Available NOW -
		+	- Issue 12 - May 2013 - Available NOW -

@@ Line 2,072: / Line 2,072: @@
 |May need updated bootcode.bin (BELzEBUB), Confirmed on Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 (Arces), works with Raspian R3 (Histvan)
 |Timer 16 May 2012, BELzEBUB 30 Jun 2012, Arces 9 Jul 2012, Histvan 14 Jul 2012
 |-
 |style='background-color:#c00;'| nok
@@ Line 2,830: / Line 2,839: @@
 |Petacz 13 Aug 2012
 |-
-|style='background-color:#c00;'| nok
+|style='background-color:#0a0;'| ok
 |Verbatim
 |SDHC
@@ Line 2,836: / Line 2,845: @@
 |10
 |Premium
-|Tested with September release of Raspbian and Debian Wheezy - both fail to boot with mmc errors
+|Tested with 2013-02-09 release of Raspbian Wheezy and Rasplex 0.1.37 - blue plastic version
-|XQx 31 Oct 2012
+|Jahislove 11 may 2013
 |-
 |style='background-color:#0a0;'| ok