eLinux.org - Changes related to "Template:RPi Hardware" [en]

RPi VerifiedPeripherals

2013-05-19T14:41:45Z

Updated WIFI adapters, Patriot Memory PCBOWAU2-N now works plug and play in 2013-02-09 Raspbian, also fixed broken link for Patriot Memory PCUSBW1150

2013-05-19T06:44:09Z

Adjust link

2013-05-19T00:14:18Z

updated acme reseller link

2013-05-18T16:07:39Z

‎Working Bluetooth adapters:

2013-05-18T13:45:35Z

‎Working USB Keyboards: - SolidTek

2013-05-17T21:50:33Z

Expanded description

2013-05-17T17:28:01Z

TFT LCD Modules

2013-05-16T20:54:48Z

‎Working USB Hubs: DUB-H7: It's recommended that the total power consumption of the connected USB devices should not exceed 2.4 A, or 12 W.

2013-05-15T14:25:00Z

@@ Line 1,622: / Line 1,622: @@
 * '''Patriot Memory'''
-** [http://patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=1198&type=20 PCUSBW1150] Wireless 11N USB adapter  (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered USB hub.
+** [http://www.patriotmemory.com/product/detail.jsp?prodline=6&catid=97&prodgroupid=163&id=1198&type=24 PCUSBW1150] Wireless 11N USB adapter  (uses Realtek RTL8188CUS) Install using Micronet script. Works only through powered USB hub.
-** [http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=163&id=973&type=20 PCBOWAU2-N] Wireless 11N USB adapter  (uses Realtek RTL8191SU chip) Installed using r8712u Kernel module
+** [http://www.patriotmemory.com/product/detail.jsp?prodline=6&catid=97&prodgroupid=163&id=973&type=24 PCBOWAU2-N] Wireless 11N USB adapter  (uses Realtek RTL8191SU chip) Worked immedietly, plug and play in 2013-02-09 Raspbian via powered USB hub.
 * '''Ralink'''

@@ Line 247: / Line 247: @@
 ==== RFM12Pi - Wireless OpenEnergyMonitor Base-station ====
 Add's RFM12B wireless (868/433/912Mhz) RF transceiver capability to the Raspberry Pi. The RFM12pi has got an-board ATtiny84 microcontroller pre-loaded with firmware to decode RFM12B packets from [http://jeelabs.org JeeNode] and [http://openenergymonitor.org OpenEnergyMonitor] sensor modules onto Raspberry Pi's internal serial UART. Designed to be used with [http://emoncms.org emoncms] running on a Raspberry Pi web-server to make a low power energy, temperature and other environmental data logging and visualisation server. Developed as part of the [http://openenergymonitor.org openenergymonitor.org] project. For more info see [http://openenergymonitor.blogspot.com/2012/11/raspberry-pi-emonbase.html introductory blog] post, [http://openenergymonitor.org/emon/emonbase/raspberrypi overview documentation page] and [http://wiki.openenergymonitor.org/index.php?title=Raspberry_Pi technical documentation wiki].
 ==Expansion boards by manufacturer==

@@ Line 649: / Line 649: @@
 Europe customers: [http://www.myraspibox.com/ myraspibox store] Price: 6.00€ to 7.00€
-USA customers: [https://store.acmeun.com/ USA reseller store] Price: $7.50
+USA customers: [https://store.acmeun.com/ USA reseller store - Acme Unlimited] Price: $7.50
 {{clear}}

@@ Line 1,766: / Line 1,766: @@
 * IOGear GBU321 (Broadcom BCM2045 Chipset)
 ** Works with Raspbian Wheezy directly attached to Raspberry Pi and via powered USB hub.
 * Trust BT-2400p
 ** Working well with Raspbian Wheezy directly attached to Raspberry Pi. Using with sma-Bluetooth (SMA Solar Inverter reading software).
@@ Line 1,780: / Line 1,781: @@
 ** [http://dx.com/p/mini-bluetooth-v3-0-usb-2-0-dongle-71248 Bluetooth "3.0" Dongle]. Doesn't work reliably - eg. after some time it will hang and the device will need to be reset using fcntl. The device id is 1131:1004 Integrated System Solution Corp. Bluetooth Device.
 ** [http://dx.com/p/super-mini-bluetooth-2-0-adapter-dongle-vista-compatible-11866 Super Mini Bluetooth 2.0 Dongle]. The device is recognized and after installing bluez-firmware you can bring it up with hcitool hci0 up. However whenever you try to pair with any device it will cause kernel panic and lock up the system. Confirmed on Raspbian, RaspBMC. The device is a counterfeit Cambridge Silicon Radio device, probably with several bugs in it causing lockups.
-* Asus USB-BT211
+* '''Asus USB-BT211'''
 ** Shows up as HCI device in Raspbian, but it does not scan or pair.
 ** http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9962
 == USB Ethernet adapters ==

@@ Line 1,082: / Line 1,082: @@
 ** MTS2219 Wireless Keyboard and mouse set. Powered hub NOT used. (B)
-*'''SolidTek'''
+*'''[http://www.solidtekusa.com/ SolidTek]'''
-** Solid Tek KB-P3100BU ASK-3100U.
+** SolidTek KB-P3100BU ASK-3100U.
 *'''Sony'''

@@ Line 26: / Line 26: @@
 ==== LedBorg ====
 [http://www.piborg.org/ledborg LedBorg] is an ultra bright RGB LED add on board for your Raspberry Pi. Capable of 27 colour combinations and controllable from either a GUI or the command line, it can also perform patterns.
-Small board which connects directly to the GPIO header.
+Small board which connects directly to the GPIO header, Light up your case to suit your mood or display status information.
 ====Meltwater's RGB LED Board====

← Older revision		Revision as of 17:28, 17 May 2013
Line 140:		Line 140:

	The old-style 2-line, 16-character LCD displays can be commonly controlled over UART, thus providing a cheap way to display values for sensors etc.<!-- This is almost certainly wrong. These displays come in I2C and parallel bus models. Check and post refs. -->		The old-style 2-line, 16-character LCD displays can be commonly controlled over UART, thus providing a cheap way to display values for sensors etc.<!-- This is almost certainly wrong. These displays come in I2C and parallel bus models. Check and post refs. -->
		+
		+	===TFT LCD Modules===
		+
		+	LCD Modules with SPI or a parallel interface, can be connected to the Raspberry Pi.
		+
		+	SPI displays is available in sizes from 1.8" to 2.8".
		+
		+	Parallel interface displays can be found in many sizes, usually up to 5". Parallel interfaces can be 8 or 16-bits wide.
		+
		+	'''Linux Framebuffer driver projects'''
		+	* https://github.com/notro/fbtft/wiki
		+	* http://www.whence.com/rpi/
		+
		+	'''Display Adapter kits'''
		+	* [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=64&t=43702 Raspberry PI LCD Adapter Kit for ITDB02 displays]
		+	* [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=59&t=40674 1.8inch TFT LCD + Switch Shield]

	==References==		==References==

@@ Line 371: / Line 371: @@
 |USB 2.0
 |7-Port
-|3.0&nbsp;A
+|2.4&nbsp;A
 |Verified
-|[http://www.misco.co.uk/product/94282/D-Link-7-Port-USB-Hub] Power USB slots can be used to power Raspberry Pi.
+|[http://www.dlink.com/us/en/home-solutions/connect/usb/dub-h7-7-port-usb-2-0-hub] Power USB slots can be used to power Raspberry Pi.
 |- valign="top" align="left" style="background: #F5FAFF;"

← Older revision		Revision as of 14:25, 15 May 2013
Line 1,122:		Line 1,122:

	[[Media:Raspberry_Pi_I-O_viii.doc \| Raspberry_Pi_I-O_viii.doc]]		[[Media:Raspberry_Pi_I-O_viii.doc \| Raspberry_Pi_I-O_viii.doc]]
		+
		+	==SPI==
		+
		+	There is one SPI bus brought out to the header: [[RPi_SPI]]

	==MIPI CSI-2==		==MIPI CSI-2==