Difference between revisions of "Talk:RPi Low-level peripherals"

From eLinux.org
Jump to: navigation, search
Line 6: Line 6:
  
 
Donster2k: Most of the reference links to the forum are broken. Probably happened when they moved the forum.
 
Donster2k: Most of the reference links to the forum are broken. Probably happened when they moved the forum.
 +
 +
naicheben: The color legend is fine for the table "Header Pinout" but it does not correspond to the GPIOs.gif as stated below the GIF. Shouldn't we better use same color "coding"?

Revision as of 16:05, 2 March 2012

Donster2k: "Kernel boot messages go to the UART at 115200bps." - This should be configurable as a kernel parameter. It is the bootloader that will always output to the uart on the header, correct?

Donster2k: What will be the power-on states of the GPIO pins?

Donster2k: USB2 spec states that the max current draw from a port (either powered hub or PC's usb) is 500mA. Does this mean that the revB module will need to be powered via a usb charger?

Donster2k: Most of the reference links to the forum are broken. Probably happened when they moved the forum.

naicheben: The color legend is fine for the table "Header Pinout" but it does not correspond to the GPIOs.gif as stated below the GIF. Shouldn't we better use same color "coding"?