Difference between revisions of "User:Hj-alceol"

From eLinux.org
Jump to: navigation, search
(Created page with "= HJ-Alceol =")
 
Line 1: Line 1:
 
= HJ-Alceol =
 
= HJ-Alceol =
 +
== Projects ==
 +
# RPi Art FoamCardboard case
 +
# RPNuino
 +
== An 4€ RPi case ==
 +
When having an RPi for 30€, buying a 15€ case is quit expensive.  I decided to create this case.  You just need :
 +
# An 21x29.7 Art foam Cardboard
 +
# Cutter
 +
# Glue (the gel kind is the best
 +
 +
How to :
 +
# Print the template with the right scale
 +
# Validate the sizes
 +
# Cut and glue
 +
# If the RPi will stay powered for a long time.  A few vent holes could be added
 +
Final touch
 +
# Print a Raspberry Pi logo and glue it
 +
 +
== RPNuino ==
 +
This project aims to interface an Arduino stack thru the standard USB port.  It will be coupled with an RPN kindof calculator allowing a Php/Apache stack to send commands and retrieve information on the Arduino.
 +
 +
The RPi runs under Arch linux with only the eth0 connection.
 +
 +
Work in progress !

Revision as of 08:30, 20 July 2012

HJ-Alceol

Projects

  1. RPi Art FoamCardboard case
  2. RPNuino

An 4€ RPi case

When having an RPi for 30€, buying a 15€ case is quit expensive. I decided to create this case. You just need :

  1. An 21x29.7 Art foam Cardboard
  2. Cutter
  3. Glue (the gel kind is the best

How to :

  1. Print the template with the right scale
  2. Validate the sizes
  3. Cut and glue
  4. If the RPi will stay powered for a long time. A few vent holes could be added

Final touch

  1. Print a Raspberry Pi logo and glue it

RPNuino

This project aims to interface an Arduino stack thru the standard USB port. It will be coupled with an RPN kindof calculator allowing a Php/Apache stack to send commands and retrieve information on the Arduino.

The RPi runs under Arch linux with only the eth0 connection.

Work in progress !