Difference between revisions of "User:Hj-alceol"

From eLinux.org
Jump to: navigation, search
(Projects)
Line 1: Line 1:
 
= HJ-Alceol =
 
= HJ-Alceol =
 
== Projects ==
 
== Projects ==
# RPi Art FoamCardboard case
+
# RPi Art FoamCardBoard case [[RPi_Cases#Foam_Board|In Case Page]]
 
# RPNuino
 
# RPNuino
 +
 
== An 4€ RPi case ==
 
== An 4€ RPi case ==
 
When having an RPi for 30€, buying a 15€ case is quit expensive.  I decided to create this case.  You just need :
 
When having an RPi for 30€, buying a 15€ case is quit expensive.  I decided to create this case.  You just need :

Revision as of 09:15, 20 July 2012

HJ-Alceol

Projects

  1. RPi Art FoamCardBoard case In Case Page
  2. RPNuino

An 4€ RPi case

When having an RPi for 30€, buying a 15€ case is quit expensive. I decided to create this case. You just need :

  1. An 21x29.7 Art foam Cardboard
  2. Cutter
  3. Glue (the gel kind is the best

How to :

  1. Print the template with the right scale
  2. Validate the sizes
  3. Cut and glue
  4. If the RPi will stay powered for a long time. A few vent holes could be added

Final touch

  1. Print a Raspberry Pi logo and glue it

RPNuino

This project aims to interface an Arduino stack thru the standard USB port. It will be coupled with an RPN kindof calculator allowing a Php/Apache stack to send commands and retrieve information on the Arduino.

The RPi runs under Arch linux with only the eth0 connection.

Work in progress !