Difference between revisions of "User:Hj-alceol"

From eLinux.org
Jump to: navigation, search
(Projects)
(An 4€ RPi case)
Line 12: Line 12:
 
How to :
 
How to :
 
# Print the template with the right scale
 
# Print the template with the right scale
# Validate the sizes  
+
# Validate the sizes
# Cut and glue
+
# Glue the template on the board
 +
# Cut, assemble and glue
 
# If the RPi will stay powered for a long time.  A few vent holes could be added
 
# If the RPi will stay powered for a long time.  A few vent holes could be added
 
Final touch
 
Final touch

Revision as of 03:33, 20 July 2012

HJ-Alceol

Projects

  1. RPi Art FoamCardBoard case In Case Page
  2. RPNuino

An 4€ RPi case

When having an RPi for 30€, buying a 15€ case is quit expensive. I decided to create this case. You just need :

  1. An 21x29.7 Art foam Cardboard
  2. Cutter
  3. Glue (the gel kind is the best

How to :

  1. Print the template with the right scale
  2. Validate the sizes
  3. Glue the template on the board
  4. Cut, assemble and glue
  5. If the RPi will stay powered for a long time. A few vent holes could be added

Final touch

  1. Print a Raspberry Pi logo and glue it

RPNuino

This project aims to interface an Arduino stack thru the standard USB port. It will be coupled with an RPN kindof calculator allowing a Php/Apache stack to send commands and retrieve information on the Arduino.

The RPi runs under Arch linux with only the eth0 connection.

Work in progress !