Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "Userspace Arduino"

Jump to: navigation, search
Line 220: Line 220:
* will use [[RPi_Gertboard]] for initial development
* will use [[RPi_Gertboard]] for initial development
<br />
<br />
= Action List and Issues  =
* The Arduino 1.5 IDE has better support for arbitrary architectures than the Energia fork of Arduino. This could help since the architecture specific stuff has been moved to config files. Further investigation is needed. Should the Userspace implementation forked directly out of the Arduino IDE or should the current implementation continue?
* For development beyond the GSOC period, an option to get this upstream needs to be considered.
* The BBB needs a separate FTDI cable for serial ports. However, a /dev/ttyACM port is available over USB. It can be used for uploading via the normal bootloader way. After the upload, it can be used for serial read/write to the host (PC).
* A single protocol to tackle uploading via USB and ethernet and may not be feasible. Networking over USB is pretty unreliable and tough for newbies to get working. For ethernet upload, several of the above options can be considered. For USB, a simple bootloader emulator will do.
<br />
<br />
<br />

Revision as of 19:49, 19 July 2013

Development Blogs for the Userspace Arduino project:

This page documents research on creating a userspace executable using the wiring and Processing language used with Arduino.

Getting Started


Beaglebone Black

The examples have been tested to work on production images later than 2013.06.20. You will need a 4 GB (or greater) microSD card for flashing the Beaglebone Black, a process which may take well over 45 minutes. It is documented on the CircuitCo wiki. If you are unsure which image is currently loaded on the Beaglebone Black, check it at


BeagleBone Black

~$ wget
~$ sudo tar -C / -xzf angstrom-2011.03-x86_64-linux-armv7a-linux-gnueabi-toolchain.tar.bz2
~$ export PATH=/usr/local/angstrom/arm/bin:$PATH
~$ export CROSS_COMPILE=arm-angstrom-linux-gnueabi-

Links to 64 and 32 bit versions of Angstrom toolchain.


  • todo

Raspberry Pi

  • todo


git clone

Running a demo

Running Blink LED program:

cd Userspace-Arduino/arduino-makefile/examples/BlinkUserspace
  • A binary BlinkUserspace.elf should be created in a directory build-userspace
  • send-exec is an upload and execute script, which is integrated with the Arduino-Userspace repository. It uses the scp protocol to copy binaries to the Beaglebone Black over USB/ethernet and execute it. You can find it in the utility folder.
  • To use it, simply do
make upload 

Setup SSH keys (optional)

  • If you want to avoid a password prompt, you can set up the ssh keys for the Beaglebone Black:
cd ~/.ssh
ssh-keygen -t dsa #set a password or you can leave it blank
ssh-copy-id -i ~/.ssh/ root@$ # replace by your public key file if some other name is given
ssh root@ # login and enter password once

Here after, you won't be prompted for a password from this machine

Boards Supported

Beaglebone Black

Initial development is being done with the Beaglebone Black and the Bacon Cape

  • if you have your Beaglebone Black loaded with a firmware image older that 07.11.2013, you will need copy the Bacon Cape dtbo file on to your beaglebone black
~# scp ~/Downloads/BB-BONE-BACONE-00A0.dtbo root@
Arduino Pin BBB Header Pin Function Alternate Function
0 P9_11 UART (RXD)
1 P9_13 UART (TXD)
2 P9_15 GPIO
3 P9_14 PWM
4 P9_12 GPIO
5 P9_16 PWM
6 P9_42 PWM
7 P8_19 GPIO PWM
8 P9_19 I2C (SCL)
9 P9_20 I2C (SDA)
10 P9_17 GPIO SPI_CS0
12 P9_21 SPI_MISO
13 P9_22 GPIO SCK
18 P9_33 AIN4
19 P9_35 AIN6
20 P9_36 AIN5
21 P9_37 AIN2
22 P9_38 AIN3
23 P9_39 AIN0
24 P9_40 AIN1


  • Initial support started
  • Need Lure accessory board for testing

Raspberry Pi

Userspace_Arduino:To Do