Difference between revisions of "Userspace Arduino"

From eLinux.org
Jump to: navigation, search
Line 220: Line 220:
 
* will use [[RPi_Gertboard]] for initial development
 
* will use [[RPi_Gertboard]] for initial development
 
<br />
 
<br />
 
+
[[Userspace_Arduino:To Do]]
 
<br />
 
<br />
 
[[Category:Arduino]]
 
[[Category:Arduino]]
Line 226: Line 226:
 
[[Category: MinnowBoard]]
 
[[Category: MinnowBoard]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
[[Userspace_Arduino:To Do]]
+
[[Category: Userspace_Arduino]]

Revision as of 19:51, 19 July 2013

Development Blogs for the Userspace Arduino project:


This page documents research on creating a userspace executable using the wiring and Processing language used with Arduino.

Getting Started

Image

Beaglebone Black

The examples have been tested to work on production images later than 2013.06.20. You will need a 4 GB (or greater) microSD card for flashing the Beaglebone Black, a process which may take well over 45 minutes. It is documented on the CircuitCo wiki. If you are unsure which image is currently loaded on the Beaglebone Black, check it at http://www.crashcourse.ca/wiki/index.php/Examining_your_BBB_install_version.

Toolchain

BeagleBone Black

~$ wget http://www.angstrom-distribution.org/toolchains/angstrom-2011.03-x86_64-linux-armv7a-linux-gnueabi-toolchain.tar.bz2
~$ sudo tar -C / -xzf angstrom-2011.03-x86_64-linux-armv7a-linux-gnueabi-toolchain.tar.bz2
~$ export PATH=/usr/local/angstrom/arm/bin:$PATH
~$ export CROSS_COMPILE=arm-angstrom-linux-gnueabi-


Links to 64 and 32 bit versions of Angstrom toolchain.


MinnowBoard

  • todo

Raspberry Pi

  • todo

Cloning

git clone https://github.com/prpplague/Userspace-Arduino.git


Running a demo


Running Blink LED program:

cd Userspace-Arduino/arduino-makefile/examples/BlinkUserspace
make
  • A binary BlinkUserspace.elf should be created in a directory build-userspace
  • send-exec is an upload and execute script, which is integrated with the Arduino-Userspace repository. It uses the scp protocol to copy binaries to the Beaglebone Black over USB/ethernet and execute it. You can find it in the utility folder.
  • To use it, simply do
make upload 

Setup SSH keys (optional)

  • If you want to avoid a password prompt, you can set up the ssh keys for the Beaglebone Black:
cd ~/.ssh
ssh-keygen -t dsa #set a password or you can leave it blank
ssh-copy-id -i ~/.ssh/id_dsa.pub root@$192.168.7.2 # replace id_dsa.pub by your public key file if some other name is given
ssh root@192.168.7.2 # login and enter password once

Here after, you won't be prompted for a password from this machine

Boards Supported


Beaglebone Black

Initial development is being done with the Beaglebone Black and the Bacon Cape

  • if you have your Beaglebone Black loaded with a firmware image older that 07.11.2013, you will need copy the Bacon Cape dtbo file on to your beaglebone black
~# scp ~/Downloads/BB-BONE-BACONE-00A0.dtbo root@192.168.7.2:/lib/firmware/BB-BONE-BACONE-00A0.dtbo
Arduino Pin BBB Header Pin Function Alternate Function
0 P9_11 UART (RXD)
1 P9_13 UART (TXD)
2 P9_15 GPIO
3 P9_14 PWM
4 P9_12 GPIO
5 P9_16 PWM
6 P9_42 PWM
7 P8_19 GPIO PWM
8 P9_19 I2C (SCL)
9 P9_20 I2C (SDA)
10 P9_17 GPIO SPI_CS0
11 P9_18 GPIO SPI_MOSI
12 P9_21 SPI_MISO
13 P9_22 GPIO SCK
14 USR LED 0 LED
15 USR LED 1 LED
16 USR LED 2 LED
17 USR LED 3 LED
18 P9_33 AIN4
19 P9_35 AIN6
20 P9_36 AIN5
21 P9_37 AIN2
22 P9_38 AIN3
23 P9_39 AIN0
24 P9_40 AIN1


MinnowBoard

  • Initial support started
  • Need Lure accessory board for testing


Raspberry Pi


Userspace_Arduino:To Do