Difference between revisions of "UsingJtagTools"
(Legacy Content Conversion)
|Line 83:||Line 83:|
Latest revision as of 21:52, 10 February 2008
Note: This assumes that you use the default locations for the jtag tools 0.6 install (HEAD from cvs). Please adjust your paths accordingly
Add Support for the Juicebox
here is a [attachment:jtag-jb.diff patch] against the 0.5.1 release. it would be nice if someone made the changes against the cvs repo head and submit it to the openwince folks. There's been some version slippage, and you'll need v0.3.2 of the OpenWinCE Includes to compile jtag 0.5.1.
here is an [attachment:jtag-jb-cvs-alpha.diff alpha patch] against version 0.6 (cvs head). please try this out and post/fix issues you see with it.
* Install OpenWinCE Includes * Get the latest code from cvs * Apply the patch * Run "autogen.sh" * make && make install
Get the latest Jtag Tools from the OpenWinCE project CVS Repo - http://openwince.sourceforge.net/jtag/
Manually Add Support
Note: This is by far the least desirable method
Using the attached BSDL on ["JuiceBoxJTAG"] file you can create the necessary files for jtag tools using the included bsdl2jtag.
#Convert the BSDL file by piping in the #bsdl file and piping the stdout to a file bsdl2jtag < s3c44b0x.bsdl > 0001 #Modify the MANUFACTURERS file echo 11110000111 juicebox juicebox >> /usr/local/share/jtag/MANUFACTURERS #Create the juicebox device mkdir -p /usr/local/share/jtag/juicebox/s3c44b0x mv 0001 /usr/local/share/jtag/juicebox/s3c44b0x/ echo 1111000011110000 s3c44b0x S3C44B0X > /usr/local/share/jtag/juicebox/PARTS echo 0001 0001 0001 > /usr/local/share/jtag/juicebox/s3c44b0x/STEPPINGS
I am having issues doing anything useful since I do not have the correct bus driver, or don't know which to use. If you are using jtag tools with the juicebox please post some details on the bus driver.
Using Jtag Tools
You can now start jtag tools (/usr/local/bin/jtag) and detect the device
This example uses a Xilinx Parallel Cable III (Model DLC5)
jtag> cable parallel 0x378 DLC5 jtag> detect jtag> print chain
Print out the current pin values
jtag> instruction SAMPLE/PRELOAD jtag> shift ir jtag> shift dr jtag> dr
Initialize the Bus (to peek/poke/copy memory and the other good stuff) and ID the cart
jtag> initbus s3c44b0x *no cart* jtag> peek 0x00590000 bus_read(0x00590000) = 0x0000CE0C (52748) *video cart* jtag> peek 0x00590000 bus_read(0x00590000) = 0x00001880 (6272)
Note: Here I am assuming that the cart id is only 32 bits but I don't know that to be the case
Useful Scripts for Jtag Tools
This script will set up a Xilinx Parallel Cable III (DLC5), detect the juicebox, print out the jtag chain, and initialize the juicebox jtag driver. The help screen is just to show you what other commands are available.
cable parallel 0x378 DLC5 detect print initbus s3c44b0x help
This script is kinda useless but I wanted to show that you can call one script from another. This probably can be done with "include" as well but I haven't that command yet. id_cart
script /home/antics/jb/init peek 0x00590000