WandBoard - Revision history

Agalakhov: /* EDM module */

2013-01-17T15:26:40Z

‎EDM module

Agalakhov: /* EDM module */

2013-01-17T15:23:37Z

‎EDM module

Agalakhov at 14:33, 17 January 2013

2013-01-17T14:33:18Z

Agalakhov: Created page with "The http://wandboard.org WandBoard is a very low-cost development platform based on the Freescale i.MX6 processor. = Hardware = There are currently two versions of WandB..."

2013-01-17T14:31:59Z

Created page with "The http://wandboard.org WandBoard is a very low-cost development platform based on the Freescale i.MX6 processor. = Hardware = There are currently two versions of WandB..."

New page

The [[http://wandboard.org WandBoard]] is a very low-cost development platform based on the Freescale i.MX6 processor.

= Hardware =

There are currently two versions of WandBoard, "Solo" and "Dual". The WandBoard itself is a System-On-Module of the [[EDM]] standard that comes with a matching motherboard. The motherboard is quite trivial and is the same for both versions of the WandBoard.

[[File:WandBoard_front.jpg]]
[[File:WandBoard_back.jpg]]

== EDM module ==

* Freescale i.MX6 CPU (ARM Cortex A9)
** i.MX6 Solo (single core) on "Solo" version
** i.MX6 Dual Lite (dual core) on "Dual" version
** Vivante GPU
* DDR3 RAM
** 512 MB on "Solo" version (two 2Gbit chips)
** 1 Gigabyte on "Dual" version (four 2Gbit chips)
* MicroSD card slot (bootable, at SD3 of the CPU)
* AR8031 Gigabit LAN
* BCM4329 Wi-Fi+Bluetooth (at SD2, UART3, AUD5; unpopulated on "Solo" version)
* Flat cable connector for camera (CSI, I2C2, GPIO)
* Power circuit (5V input)

== Motherboard ==

* Gigabit LAN connector
* HDMI connector
* USB host connector (USB3 for future use but currently in USB2 mode only)
* USB OTG connector
* MicroSD card slot (at SD1)
* UART DB9 connector (at UART1 via ADM3202)
* Audio I/O (at AUD3 via SGTL5000) and SPDIF (3.5mm jacks)
* 5VDC power barrel connector
* SATA connector (probably unpopulated, reserved for future use; no SATA on i.MX6 Solo and Dual Lite)
* Four 1.27mm 2x10 expansion headers:
** LVDS0 (4 signal pairs + clock), +3V3
** Flat panel display data lines (24 bit total); no power or GND at this header
** Rest of FPD data lines, FPD control lines, +3V3, three I2C interfaces
** One SPI (with two CS), 8 GPIO lines, +5V

= Availability =

As of Jan 17, 2013 preorder only. Prices are 69 USD for Solo and 89 USD for Dual. First boards seem to be shipped to partner developers.

= Community =

* Website: [http://wandboard.org http://wandboard.org]

[[category:Development Boards]]

@@ Line 13: / Line 13: @@
 ** i.MX6 Solo (single core) on "Solo" version
 ** i.MX6 Dual Lite (dual core) on "Dual" version
-** Vivante GPU
+** Vivante GPU:
-*** 3D core: GC2000 @ 528MHz (600 MHz shader), 88M triangles/sec, 4 shader cores: 21.6 GFLOPS
+*** 3D core: GC880 @ @ 533MHz, 1 shader core 4.8 GFLOPS
 *** 2D core: GC320 composition engine
-*** vector graphics: GC355 OpenVG 1.1 vector acceleration with hardware tessellation
-−
 * DDR3 RAM
 ** 512 MB on "Solo" version (two 2Gbit chips)

@@ Line 31: / Line 31: @@
 * MicroSD card slot (at SD1)
 * UART DB9 connector (at UART1 via ADM3202)
-* Audio I/O (at AUD3 via SGTL5000) and SPDIF (3.5mm jacks)
+* Audio I/O (at AUD3 via SGTL5000) and SPDIF (3.5mm jacks and optical)
 * 5VDC power barrel connector
 * SATA connector (probably unpopulated, reserved for future use; no SATA on i.MX6 Solo and Dual Lite)