diff -pruN linux-2.6.8.1.orig/arch/mips/boot/Makefile rbtx/arch/mips/boot/Makefile --- linux-2.6.8.1.orig/arch/mips/boot/Makefile 2004-08-14 03:55:59.000000000 -0700 +++ rbtx/arch/mips/boot/Makefile 2004-10-19 14:22:31.000000000 -0700 @@ -36,6 +36,14 @@ vmlinux.srec: vmlinux $(obj)/addinitrd: $(obj)/addinitrd.c $(HOSTCC) -o $@ $^ +ifdef CONFIG_MIPS64 +vmlinux.elf: vmlinux.32 + $(STRIP) -o $(obj)/vmlinux.elf vmlinux.32 +else +vmlinux.elf: vmlinux + $(STRIP) -o $(obj)/vmlinux.elf vmlinux +endif + archhelp: @echo '* vmlinux.ecoff - ECOFF boot image' @@ -43,5 +51,6 @@ clean-files += addinitrd \ elf2ecoff \ vmlinux.ecoff \ vmlinux.srec \ + vmlinux.elf \ zImage.tmp \ zImage diff -pruN linux-2.6.8.1.orig/arch/mips/configs/tx-r4k-be_defconfig rbtx/arch/mips/configs/tx-r4k-be_defconfig --- linux-2.6.8.1.orig/arch/mips/configs/tx-r4k-be_defconfig 1969-12-31 16:00:00.000000000 -0800 +++ rbtx/arch/mips/configs/tx-r4k-be_defconfig 2004-10-19 14:22:31.000000000 -0700 @@ -0,0 +1,1423 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_MIPS=y +# CONFIG_MIPS64 is not set +# CONFIG_64BIT is not set +CONFIG_MIPS32=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_KMOD=y + +# +# Machine selection +# +# CONFIG_MACH_JAZZ is not set +# CONFIG_BAGET_MIPS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_NEC_OSPREY is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SOC_AU1X00 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +CONFIG_TX_RBTX4927=y +CONFIG_TX_RBTX4938=y +# CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND is not set +CONFIG_TX_BOARDS=y +# CONFIG_PICMG_PCI_BACKPLANE_DEFAULT is not set +# CONFIG_PCI_ISA_BRIDGE is not set +# CONFIG_SMSC_SUPERIO is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_IRQ_CPU=y +CONFIG_HAVE_BOARD_IO_FUNCS=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_FB is not set +CONFIG_HEARTBEAT=y +CONFIG_ARCH_EXTRAVERSION="-r4k" + +# +# CPU selection +# +# CONFIG_CPU_MIPS32 is not set +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +CONFIG_CPU_TX49XX=y +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_LLDSCD=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_PREEMPT=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_PCI_NAMES=y +CONFIG_ISA=y +CONFIG_MMU=y + +# +# PCMCIA/CardBus support +# +# CONFIG_PCMCIA is not set +CONFIG_PCMCIA_PROBE=y + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y +# CONFIG_BINFMT_IRIX is not set + +# +# MIPS initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLOCK is not set +CONFIG_MTD_BLOCK_RO=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_CSTM_MIPS_IXX is not set +CONFIG_MTD_TXBOARD=y +# CONFIG_MTD_PCI is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_IDS=m +CONFIG_MTD_NAND_TXX9NDFMC=m +# CONFIG_MTD_NAND_DISKONCHIP is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_LBD is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AACRAID is not set +CONFIG_SCSI_AIC7XXX=y +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set +# CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_AIC7XXX_DEBUG_MASK=0 +# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +# CONFIG_IEEE1394_VIDEO1394 is not set +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +# CONFIG_IEEE1394_DV1394 is not set +CONFIG_IEEE1394_RAWIO=m +# CONFIG_IEEE1394_CMP is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +CONFIG_NET_KEY=m +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_LOCAL=y +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_IP_NF_COMPAT_IPCHAINS=m +# CONFIG_IP_NF_COMPAT_IPFWADM is not set +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_XFRM=y +CONFIG_XFRM_USER=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +CONFIG_TC35815_1=y +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_LAN_SAA9730 is not set +# CONFIG_NET_POCKET is not set +CONFIG_TXBOARD_OBNE_NET=y + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=m +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +CONFIG_PCI_HERMES=m +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_DIGI is not set +# CONFIG_ESPSERIAL is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_SERIAL_TX3912 is not set +# CONFIG_AU1000_UART is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_TXX9=y +CONFIG_SERIAL_TXX9_CONSOLE=y +CONFIG_SERIAL_TXX9_STDSERIAL=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_QIC02_TAPE is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_TXX9_WDT=m + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_RTC is not set +CONFIG_GEN_RTC=y +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TXX9_IT is not set +# CONFIG_TXX9_SPIDRV is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISA is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_TXX9PIO is not set + +# +# Hardware Sensors Chip support +# +# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ISA devices +# +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4232 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_WAVEFRONT is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_SGALAXY is not set +# CONFIG_SND_SSCAPE is not set + +# +# PCI devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_YMFPCI=m +# CONFIG_SND_ALS4000 is not set +CONFIG_SND_CMIPCI=m +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VX222 is not set + +# +# ALSA USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# ALSA MIPS devices +# +# CONFIG_SND_TX49XX is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_UHCI_HCD=m + +# +# USB Device Class drivers +# +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_MIDI is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_RW_DETECT is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Human Interface Devices (HID) +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_HPUSBSCSI is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network adaptors +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=m + +# +# USB Host-to-Host Cables +# +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +# CONFIG_USB_BELKIN is not set +# CONFIG_USB_GENESYS is not set +# CONFIG_USB_NET1080 is not set +# CONFIG_USB_PL2301 is not set + +# +# Intelligent USB Devices/Gadgets +# +# CONFIG_USB_ARMLINUX is not set +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_ZAURUS is not set +CONFIG_USB_CDCETHER=y + +# +# USB Network Adapters +# +# CONFIG_USB_AX8817X is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_TIGL is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_TEST is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_GOKU=y +CONFIG_USB_GOKU=m +# CONFIG_USB_GADGET_SA1100 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_NAND=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=m +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="" +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB is not set +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_MIPS_UNCACHED is not set + +# +# Security options +# +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff -pruN linux-2.6.8.1.orig/arch/mips/configs/tx-r4k_defconfig rbtx/arch/mips/configs/tx-r4k_defconfig --- linux-2.6.8.1.orig/arch/mips/configs/tx-r4k_defconfig 1969-12-31 16:00:00.000000000 -0800 +++ rbtx/arch/mips/configs/tx-r4k_defconfig 2004-10-19 14:22:31.000000000 -0700 @@ -0,0 +1,1421 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_MIPS=y +# CONFIG_MIPS64 is not set +# CONFIG_64BIT is not set +CONFIG_MIPS32=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_KMOD=y + +# +# Machine selection +# +# CONFIG_MACH_JAZZ is not set +# CONFIG_BAGET_MIPS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_NEC_OSPREY is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SOC_AU1X00 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +CONFIG_TX_RBTX4927=y +CONFIG_TX_RBTX4938=y +# CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND is not set +CONFIG_TX_BOARDS=y +# CONFIG_PICMG_PCI_BACKPLANE_DEFAULT is not set +# CONFIG_PCI_ISA_BRIDGE is not set +# CONFIG_SMSC_SUPERIO is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_BOOT_ELF32=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_FB is not set +CONFIG_HEARTBEAT=y +CONFIG_ARCH_EXTRAVERSION="-r4k" + +# +# CPU selection +# +# CONFIG_CPU_MIPS32 is not set +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +CONFIG_CPU_TX49XX=y +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_LLDSCD=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_PREEMPT=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_PCI_NAMES=y +CONFIG_ISA=y +CONFIG_MMU=y + +# +# PCMCIA/CardBus support +# +# CONFIG_PCMCIA is not set +CONFIG_PCMCIA_PROBE=y + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# MIPS initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLOCK is not set +CONFIG_MTD_BLOCK_RO=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_CSTM_MIPS_IXX is not set +CONFIG_MTD_TXBOARD=y +# CONFIG_MTD_PCI is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_IDS=m +CONFIG_MTD_NAND_TXX9NDFMC=m +# CONFIG_MTD_NAND_DISKONCHIP is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_LBD is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AACRAID is not set +CONFIG_SCSI_AIC7XXX=y +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set +# CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_AIC7XXX_DEBUG_MASK=0 +# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=m + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=m + +# +# Protocol Drivers +# +# CONFIG_IEEE1394_VIDEO1394 is not set +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +# CONFIG_IEEE1394_DV1394 is not set +CONFIG_IEEE1394_RAWIO=m +# CONFIG_IEEE1394_CMP is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +CONFIG_NET_KEY=m +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_LOCAL=y +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_IP_NF_COMPAT_IPCHAINS=m +# CONFIG_IP_NF_COMPAT_IPFWADM is not set +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_XFRM=y +CONFIG_XFRM_USER=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +CONFIG_TC35815_1=y +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_LAN_SAA9730 is not set +# CONFIG_NET_POCKET is not set +CONFIG_TXBOARD_OBNE_NET=y + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=m +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +CONFIG_PCI_HERMES=m +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_DIGI is not set +# CONFIG_ESPSERIAL is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_SERIAL_TX3912 is not set +# CONFIG_AU1000_UART is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_TXX9=y +CONFIG_SERIAL_TXX9_CONSOLE=y +CONFIG_SERIAL_TXX9_STDSERIAL=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_QIC02_TAPE is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_TXX9_WDT=m + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_RTC is not set +CONFIG_GEN_RTC=y +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TXX9_IT is not set +# CONFIG_TXX9_SPIDRV is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISA is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_TXX9PIO is not set + +# +# Hardware Sensors Chip support +# +# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ISA devices +# +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4232 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_WAVEFRONT is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_SGALAXY is not set +# CONFIG_SND_SSCAPE is not set + +# +# PCI devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_YMFPCI=m +# CONFIG_SND_ALS4000 is not set +CONFIG_SND_CMIPCI=m +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VX222 is not set + +# +# ALSA USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# ALSA MIPS devices +# +# CONFIG_SND_TX49XX is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_UHCI_HCD=m + +# +# USB Device Class drivers +# +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_MIDI is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_RW_DETECT is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Human Interface Devices (HID) +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_HPUSBSCSI is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network adaptors +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=m + +# +# USB Host-to-Host Cables +# +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +# CONFIG_USB_BELKIN is not set +# CONFIG_USB_GENESYS is not set +# CONFIG_USB_NET1080 is not set +# CONFIG_USB_PL2301 is not set + +# +# Intelligent USB Devices/Gadgets +# +# CONFIG_USB_ARMLINUX is not set +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_ZAURUS is not set +CONFIG_USB_CDCETHER=y + +# +# USB Network Adapters +# +# CONFIG_USB_AX8817X is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_TIGL is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_TEST is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_GOKU=y +CONFIG_USB_GOKU=m +# CONFIG_USB_GADGET_SA1100 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_NAND=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=m +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="" +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB is not set +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_MIPS_UNCACHED is not set + +# +# Security options +# +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff -pruN linux-2.6.8.1.orig/arch/mips/Kconfig rbtx/arch/mips/Kconfig --- linux-2.6.8.1.orig/arch/mips/Kconfig 2004-08-14 03:55:32.000000000 -0700 +++ rbtx/arch/mips/Kconfig 2004-10-19 14:22:31.000000000 -0700 @@ -11,7 +11,7 @@ config MIPS64 only select this option if you have hardware that actually has a 64-bit processor and if your application will actually benefit from 64-bit processing, otherwise say N. You must say Y for kernels for - SGI IP27 (Origin 200 and 2000). If in doubt say N. + SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N. config 64BIT def_bool MIPS64 @@ -146,6 +146,7 @@ config TOSHIBA_JMR3927 depends on MIPS32 select DMA_NONCOHERENT select HW_HAS_PCI + select SWAP_IO_SPACE config MIPS_COBALT bool "Support for Cobalt Server (EXPERIMENTAL)" @@ -198,6 +199,7 @@ config MIPS_EV96100 select IRQ_CPU select MIPS_GT96100 select RM7000_CPU_SCACHE + select SWAP_IO_SPACE help This is an evaluation board based on the Galileo GT-96100 LAN/WAN communications controllers containing a MIPS R5000 compatible core @@ -268,6 +270,7 @@ config MIPS_ATLAS bool "Support for MIPS Atlas board" select DMA_NONCOHERENT select HW_HAS_PCI + select SWAP_IO_SPACE help This enables support for the QED R5231-based MIPS Atlas evaluation board. @@ -277,6 +280,7 @@ config MIPS_MALTA select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT select HW_HAS_PCI + select SWAP_IO_SPACE help This enables support for the VR5000-based MIPS Malta evaluation board. @@ -294,6 +298,7 @@ config MOMENCO_OCELOT select IRQ_CPU select IRQ_CPU_RM7K select RM7000_CPU_SCACHE + select SWAP_IO_SPACE help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . @@ -306,6 +311,7 @@ config MOMENCO_OCELOT_G select IRQ_CPU_RM7K select PCI_MARVELL select RM7000_CPU_SCACHE + select SWAP_IO_SPACE help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . @@ -318,6 +324,7 @@ config MOMENCO_OCELOT_C select IRQ_MV64340 select PCI_MARVELL select RM7000_CPU_SCACHE + select SWAP_IO_SPACE help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . @@ -332,6 +339,7 @@ config MOMENCO_JAGUAR_ATX select LIMITED_DMA select PCI_MARVELL select RM7000_CPU_SCACHE + select SWAP_IO_SPACE help The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . @@ -349,6 +357,7 @@ config PMC_YOSEMITE select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K + select SWAP_IO_SPACE help Yosemite is an evaluation board for the RM9000x2 processor manufactured by PMC-Sierra @@ -381,7 +390,7 @@ config DDB5476 evaluation board. Features : kernel debugging, serial terminal, NFS root fs, on-board - ether port USB, AC97, PCI, PCI VGA card & framebuffer console, + ether port USB, AC97, PCI, PCI VGA card & framebuffer console, IDE controller, PS2 keyboard, PS2 mouse, etc. config DDB5477 @@ -400,17 +409,18 @@ config DDB5477_BUS_FREQUENCY int "bus frequency (in kHZ, 0 for auto-detect)" depends on DDB5477 default 0 - + config NEC_OSPREY bool "Support for NEC Osprey board" select DMA_NONCOHERENT select IRQ_CPU - + config SGI_IP22 bool "Support for SGI IP22 (Indy/Indigo2)" select DMA_NONCOHERENT select IP22_CPU_SCACHE select IRQ_CPU + select SWAP_IO_SPACE help This are the SGI Indy, Challenge S and Indigo2, as well as certain OEM variants like the Tandem CMN B006S. To compile a Linux kernel @@ -421,6 +431,7 @@ config SGI_IP27 depends on MIPS64 select DMA_IP27 select HW_HAS_PCI + select PCI_DOMAINS help This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics workstations. To compile a Linux kernel that runs on these, say Y @@ -462,9 +473,9 @@ config MAPPED_KERNEL bool "Mapped kernel support" depends on SGI_IP27 help - Change the way a Linux kernel is loaded unto memory on a MIPS64 + Change the way a Linux kernel is loaded into memory on a MIPS64 machine. This is required in order to support text replication and - NUMA. If you need to undersatand it, read the source code. + NUMA. If you need to understand it, read the source code. config REPLICATE_KTEXT bool "Kernel text replication support" @@ -483,7 +494,7 @@ config REPLICATE_EXHANDLERS config SGI_IP32 bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on MIPS64 && EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI select R5000_CPU_SCACHE @@ -513,15 +524,15 @@ config SOC_AU1550 endchoice -choice +choice prompt "AMD/Alchemy Au1x00 board support" depends on SOC_AU1X00 help These are evaluation boards built by AMD/Alchemy to showcase their Au1X00 Internet Edge Processors. The SOC design - is based on the MIPS32 architecture running at 266/400/500MHz - with many integrated peripherals. Further information can be - found at their website, . Say Y here if you + is based on the MIPS32 architecture running at 266/400/500MHz + with many integrated peripherals. Further information can be + found at their website, . Say Y here if you wish to build a kernel for this platform. config MIPS_PB1000 @@ -529,12 +540,14 @@ config MIPS_PB1000 depends on SOC_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI + select SWAP_IO_SPACE config MIPS_PB1100 bool "PB1100 board" depends on SOC_AU1100 select DMA_NONCOHERENT select HW_HAS_PCI + select SWAP_IO_SPACE config MIPS_PB1500 bool "PB1500 board" @@ -596,6 +609,7 @@ config SIBYTE_SB1xxx_SOC bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_COHERENT + select SWAP_IO_SPACE choice prompt "BCM1xxx SOC-based board" @@ -818,6 +832,39 @@ config TOSHIBA_RBTX4927 select DMA_NONCOHERENT select HW_HAS_PCI select ISA + select SWAP_IO_SPACE + +config TX_RBTX4927 + bool "Support for TX RBTX4927" + +config TX_RBTX4938 + bool "Support for TX RBTX4938" + +config TX_BRANCH_LIKELY_BUG_WORKAROUND + bool "Enable workarounds for TX39/49 branch likely bug" + default n + +config TX_FPU_C_BUG_WORKAROUND + bool "Enable workarounds for TX49 FPU C instruction bug" + depends on CONFIG_TX_RBTX4927 + default n + +config TX_BOARDS + bool + depends on TX_RBTX4927 || TX_RBTX4938 + default y + select IRQ_CPU + select DMA_NONCOHERENT + select HW_HAS_PCI + select ISA + +config PICMG_PCI_BACKPLANE_DEFAULT + bool "Support for PICMG PCI Backplane" + depends on TX_BOARDS + +config PCI_ISA_BRIDGE + bool "Support for PCI/ISA Bridge" + depends on TX_BOARDS config RWSEM_GENERIC_SPINLOCK bool @@ -849,7 +896,7 @@ config DMA_NONCOHERENT config EARLY_PRINTK bool - depends on MACH_DECSTATION + depends on MACH_DECSTATION || TX_BOARDS default y config GENERIC_ISA_DMA @@ -859,7 +906,7 @@ config GENERIC_ISA_DMA config I8259 bool - depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT + depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT || (TX_BOARDS && PCI_ISA_BRIDGE) default y config LIMITED_DMA @@ -934,7 +981,10 @@ config ITE_BOARD_GEN config SWAP_IO_SPACE bool - depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 || SIBYTE_SB1xxx_SOC || SGI_IP22 || MOMENCO_OCELOT_C || MOMENCO_OCELOT_G || MOMENCO_OCELOT || MOMENCO_JAGUAR_ATX || MIPS_MALTA || MIPS_ATLAS || MIPS_EV96100 || MIPS_PB1100 || MIPS_PB1000 + +config HAVE_BOARD_IO_FUNCS + bool + depends on (TX_BOARDS && !CPU_LITTLE_ENDIAN) default y # @@ -984,7 +1034,7 @@ config IT8712 config BOOT_ELF32 bool - depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI + depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI || TX_BOARDS default y config MIPS_L1_CACHE_SHIFT @@ -1089,8 +1139,18 @@ config TANBAC_TB0219 bool "Added TANBAC TB0219 Base board support" depends on TANBAC_TB0229 -endmenu +config HEARTBEAT + bool "Use power LED as a heartbeat" + help + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. + +config ARCH_EXTRAVERSION + string "Archtecture specific EXTRAVERSION" + default "" +endmenu menu "CPU selection" @@ -1382,21 +1442,6 @@ config PREEMPT This allows applications to run more reliably even when the system is under load. -config DEBUG_SPINLOCK - bool "Spinlock debugging" - depends on DEBUG_KERNEL - help - Say Y here and build SMP to catch missing spinlock initialization - and certain other kinds of spinlock errors commonly made. This is - best used in conjunction with the NMI watchdog so that spinlock - deadlocks are also debuggable. - -config DEBUG_SPINLOCK_SLEEP - bool "Sleep-inside-spinlock checking" - help - If you say Y here, various routines which may sleep will become very - noisy if they are called with a spinlock held. - config RTC_DS1742 bool "DS1742 BRAM/RTC support" depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 @@ -1436,6 +1481,10 @@ config PCI information about which PCI hardware does work under Linux and which doesn't. +config PCI_DOMAINS + bool + depends on PCI + source "drivers/pci/Kconfig" # @@ -1562,7 +1611,7 @@ config EMBEDDED_RAMDISK_IMAGE default "ramdisk.gz" help This is the filename of the ramdisk image to be built into the - kernel. Relative pathnames are relative to arch/mips/ramdisk/. + kernel. Relative pathnames are relative to arch/mips/ramdisk/. The ramdisk image is not part of the kernel distribution; you must provide one yourself. @@ -1572,119 +1621,7 @@ source "drivers/Kconfig" source "fs/Kconfig" -menu "Kernel hacking" - -config CROSSCOMPILE - bool "Are you using a crosscompiler" - help - Say Y here if you are compiling the kernel on a different - architecture than the one it is intended to run on. - -config CMDLINE - string "Default kernel command string" - default "" - help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - other cases you can specify kernel args so that you don't have - to set them up in board prom initialization routines. - -config DEBUG_KERNEL - bool "Kernel debugging" - -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - -config DEBUG_SLAB - bool "Debug memory allocations" - depends on DEBUG_KERNEL - help - Say Y here to have the kernel do limited verification on memory - allocation as well as poisoning memory on free to catch use of freed - memory. - -config KGDB - bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL - select DEBUG_INFO - help - If you say Y here, it will be possible to remotely debug the MIPS - kernel using gdb. This enlarges your kernel image disk size by - several megabytes and requires a machine with more than 16 MB, - better 32 MB RAM to avoid excessive linking time. This is only - useful for kernel hackers. If unsure, say N. - -config GDB_CONSOLE - bool "Console output to GDB" - depends on KGDB - help - If you are using GDB for remote debugging over a serial port and - would like kernel messages to be formatted into GDB $O packets so - that GDB prints them as program output, say 'Y'. - -config DEBUG_INFO - bool "Compile the kernel with debug info" - depends on DEBUG_KERNEL - help - If you say Y here the resulting kernel image will include - debugging info resulting in a larger kernel image. - Say Y here only if you plan to use gdb to debug the kernel. - If you don't debug the kernel, you can say N. - -config SB1XXX_CORELIS - bool "Corelis Debugger" - depends on SIBYTE_SB1xxx_SOC - select DEBUG_INFO - help - Select compile flags that produce code that can be processed by the - Corelis mksym utility and UDB Emulator. - -config RUNTIME_DEBUG - bool "Enable run-time debugging" - depends on DEBUG_KERNEL - help - If you say Y here, some debugging macros will do run-time checking. - If you say N here, those macros will mostly turn to no-ops. See - include/asm-mips/debug.h for debuging macros. - If unsure, say N. - - -config MAGIC_SYSRQ - bool "Magic SysRq key" - depends on DEBUG_KERNEL - help - If you say Y here, you will have some control over the system even - if the system crashes for example during kernel debugging (e.g., you - will be able to flush the buffer cache to disk, reboot the system - immediately or dump some status information). This is accomplished - by pressing various keys while holding SysRq (Alt+PrintScreen). It - also works on a serial console (on PC hardware at least), if you - send a BREAK and then within 5 seconds a command keypress. The - keys are documented in . Don't say Y - unless you really know what this hack does. - -config MIPS_UNCACHED - bool "Run uncached" - depends on DEBUG_KERNEL && !SMP && !SGI_IP27 - help - If you say Y here there kernel will disable all CPU caches. This will - reduce the system's performance dramatically but can help finding - otherwise hard to track bugs. It can also useful if you're doing - hardware debugging with a logic analyzer and need to see all traffic - on the bus. - -config DEBUG_HIGHMEM - bool "Highmem debugging" - depends on DEBUG_KERNEL && HIGHMEM - -endmenu +source "arch/mips/Kconfig.debug" source "security/Kconfig" diff -pruN linux-2.6.8.1.orig/arch/mips/Kconfig.debug rbtx/arch/mips/Kconfig.debug --- linux-2.6.8.1.orig/arch/mips/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800 +++ rbtx/arch/mips/Kconfig.debug 2004-10-19 14:22:31.000000000 -0700 @@ -0,0 +1,76 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config CROSSCOMPILE + bool "Are you using a crosscompiler" + help + Say Y here if you are compiling the kernel on a different + architecture than the one it is intended to run on. + +config CMDLINE + string "Default kernel command string" + default "" + help + On some platforms, there is currently no way for the boot loader to + pass arguments to the kernel. For these platforms, you can supply + some command-line options at build time by entering them here. In + other cases you can specify kernel args so that you don't have + to set them up in board prom initialization routines. + +config DEBUG_STACK_USAGE + bool "Enable stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T and sysrq-P debug output. + + This option will slow down process creation somewhat. + +config KGDB + bool "Remote GDB kernel debugging" + depends on DEBUG_KERNEL + select DEBUG_INFO + help + If you say Y here, it will be possible to remotely debug the MIPS + kernel using gdb. This enlarges your kernel image disk size by + several megabytes and requires a machine with more than 16 MB, + better 32 MB RAM to avoid excessive linking time. This is only + useful for kernel hackers. If unsure, say N. + +config GDB_CONSOLE + bool "Console output to GDB" + depends on KGDB + help + If you are using GDB for remote debugging over a serial port and + would like kernel messages to be formatted into GDB $O packets so + that GDB prints them as program output, say 'Y'. + +config SB1XXX_CORELIS + bool "Corelis Debugger" + depends on SIBYTE_SB1xxx_SOC + select DEBUG_INFO + help + Select compile flags that produce code that can be processed by the + Corelis mksym utility and UDB Emulator. + +config RUNTIME_DEBUG + bool "Enable run-time debugging" + depends on DEBUG_KERNEL + help + If you say Y here, some debugging macros will do run-time checking. + If you say N here, those macros will mostly turn to no-ops. See + include/asm-mips/debug.h for debuging macros. + If unsure, say N. + +config MIPS_UNCACHED + bool "Run uncached" + depends on DEBUG_KERNEL && !SMP && !SGI_IP27 + help + If you say Y here there kernel will disable all CPU caches. This will + reduce the system's performance dramatically but can help finding + otherwise hard to track bugs. It can also useful if you're doing + hardware debugging with a logic analyzer and need to see all traffic + on the bus. + +endmenu diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/cpu-bugs64.c rbtx/arch/mips/kernel/cpu-bugs64.c --- linux-2.6.8.1.orig/arch/mips/kernel/cpu-bugs64.c 2004-08-14 03:55:48.000000000 -0700 +++ rbtx/arch/mips/kernel/cpu-bugs64.c 2004-10-19 14:22:31.000000000 -0700 @@ -82,7 +82,7 @@ static inline void mult_sh_align_mod(lon ".set pop" : "=&r" (lv1), "=r" (lw) : "r" (m1), "r" (m2), "r" (s), "I" (0) - : "hi", "lo", "accum"); + : CLOBBER_HILO); /* We have to use single integers for m1 and m2 and a double * one for p to be sure the mulsidi3 gcc's RTL multiplication * instruction has the workaround applied. Older versions of diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/entry.S rbtx/arch/mips/kernel/entry.S --- linux-2.6.8.1.orig/arch/mips/kernel/entry.S 2004-08-14 03:54:51.000000000 -0700 +++ rbtx/arch/mips/kernel/entry.S 2004-10-19 14:22:31.000000000 -0700 @@ -16,6 +16,7 @@ #include #include #include +#include #ifdef CONFIG_PREEMPT .macro preempt_stop reg=t0 @@ -139,7 +140,11 @@ LEAF(spurious_interrupt) 1: ll t0, %lo(irq_err_count)(t1) addiu t0, 1 sc t0, %lo(irq_err_count)(t1) +#if R10000_LLSC_WAR + beqzl t0, 1b +#else beqz t0, 1b +#endif #else lui t1, %hi(irq_err_count) lw t0, %lo(irq_err_count)(t1) diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/gdb-stub.c rbtx/arch/mips/kernel/gdb-stub.c --- linux-2.6.8.1.orig/arch/mips/kernel/gdb-stub.c 2004-08-14 03:56:23.000000000 -0700 +++ rbtx/arch/mips/kernel/gdb-stub.c 2004-10-19 14:22:31.000000000 -0700 @@ -171,6 +171,8 @@ static int hexToLong(char **ptr, long *l static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault); void handle_exception(struct gdb_regs *regs); +int kgdb_enabled; + /* * spin locks for smp case */ @@ -678,6 +680,9 @@ void handle_exception (struct gdb_regs * unsigned long *stack; int i; int bflag = 0; +#if CONFIG_MIPS32 && (_MIPS_ISA == _MIPS_ISA_MIPS3) + u64 tmp64; +#endif kgdb_started = 1; @@ -755,7 +760,12 @@ void handle_exception (struct gdb_regs * *ptr++ = hexchars[REG_EPC >> 4]; *ptr++ = hexchars[REG_EPC & 0xf]; *ptr++ = ':'; +#if CONFIG_MIPS32 && (_MIPS_ISA == _MIPS_ISA_MIPS3) /* for gdb 6.1 ... */ + tmp64 = regs->cp0_epc; + ptr = mem2hex((char *)&tmp64, ptr, sizeof(u64), 0); +#else ptr = mem2hex((char *)®s->cp0_epc, ptr, sizeof(long), 0); +#endif *ptr++ = ';'; /* @@ -764,7 +774,12 @@ void handle_exception (struct gdb_regs * *ptr++ = hexchars[REG_FP >> 4]; *ptr++ = hexchars[REG_FP & 0xf]; *ptr++ = ':'; +#if CONFIG_MIPS32 && (_MIPS_ISA == _MIPS_ISA_MIPS3) /* for gdb 6.1 ... */ + tmp64 = regs->reg30; + ptr = mem2hex((char *)&tmp64, ptr, sizeof(u64), 0); +#else ptr = mem2hex((char *)®s->reg30, ptr, sizeof(long), 0); +#endif *ptr++ = ';'; /* @@ -773,7 +788,12 @@ void handle_exception (struct gdb_regs * *ptr++ = hexchars[REG_SP >> 4]; *ptr++ = hexchars[REG_SP & 0xf]; *ptr++ = ':'; +#if CONFIG_MIPS32 && (_MIPS_ISA == _MIPS_ISA_MIPS3) /* for gdb 6.1 ... */ + tmp64 = regs->reg29; + ptr = mem2hex((char *)&tmp64, ptr, sizeof(u64), 0); +#else ptr = mem2hex((char *)®s->reg29, ptr, sizeof(long), 0); +#endif *ptr++ = ';'; *ptr++ = 0; @@ -812,12 +832,19 @@ void handle_exception (struct gdb_regs * */ case 'g': ptr = output_buffer; +#if CONFIG_MIPS32 && (_MIPS_ISA == _MIPS_ISA_MIPS3) /* for gdb 6.1 ... */ + for (i = 0; i < 32 + 6 + 32 + 2 + 2 + 16; i++) { + tmp64 = *(®s->reg0 + i); + ptr = mem2hex((char *)&tmp64, ptr, sizeof(u64), 0); + } +#else ptr = mem2hex((char *)®s->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */ ptr = mem2hex((char *)®s->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */ ptr = mem2hex((char *)®s->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */ ptr = mem2hex((char *)®s->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */ ptr = mem2hex((char *)®s->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */ ptr = mem2hex((char *)®s->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */ +#endif break; /* @@ -826,6 +853,13 @@ void handle_exception (struct gdb_regs * case 'G': { ptr = &input_buffer[1]; +#if CONFIG_MIPS32 && (_MIPS_ISA == _MIPS_ISA_MIPS3) /* for gdb 6.1 ... */ + for (i = 0; i < 32 + 6 + 32 + 2 + 2 + 16; i++) { + hex2mem(ptr, (char *)&tmp64, sizeof(u64), 0, 0); + *(®s->reg0 + i) = (long)tmp64; + ptr += 2*sizeof(u64); + } +#else hex2mem(ptr, (char *)®s->reg0, 32*sizeof(long), 0, 0); ptr += 32*(2*sizeof(long)); hex2mem(ptr, (char *)®s->cp0_status, 6*sizeof(long), 0, 0); @@ -837,6 +871,7 @@ void handle_exception (struct gdb_regs * hex2mem(ptr, (char *)®s->frame_ptr, 2*sizeof(long), 0, 0); ptr += 2*(2*sizeof(long)); hex2mem(ptr, (char *)®s->cp0_index, 16*sizeof(long), 0, 0); +#endif strcpy(output_buffer,"OK"); } break; diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/head.S rbtx/arch/mips/kernel/head.S --- linux-2.6.8.1.orig/arch/mips/kernel/head.S 2004-08-14 03:55:35.000000000 -0700 +++ rbtx/arch/mips/kernel/head.S 2004-10-19 14:22:31.000000000 -0700 @@ -201,13 +201,3 @@ NESTED(smp_bootstrap, 16, sp) page invalid_pmd_table, _PMD_ORDER #endif page invalid_pte_table, _PTE_ORDER - -#ifdef CONFIG_MIPS64 - /* - * 64-bit kernel mappings are really screwed up ... - */ - page kptbl, _PGD_ORDER - .globl ekptbl - page kpmdtbl, 0 -ekptbl: -#endif diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/irq.c rbtx/arch/mips/kernel/irq.c --- linux-2.6.8.1.orig/arch/mips/kernel/irq.c 2004-08-14 03:54:50.000000000 -0700 +++ rbtx/arch/mips/kernel/irq.c 2004-10-19 14:22:31.000000000 -0700 @@ -30,12 +30,7 @@ /* * Controller mappings for all interrupt sources: */ -irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = { - [0 ... NR_IRQS-1] = { - .handler = &no_irq_type, - .lock = SPIN_LOCK_UNLOCKED - } -}; +irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned; static void register_irq_proc (unsigned int irq); @@ -809,7 +804,20 @@ int setup_irq(unsigned int irq, struct i return 0; } -void __init init_generic_irq(void) +#ifdef CONFIG_KGDB +extern void breakpoint(void); +extern void set_debug_traps(void); + +static int kgdb_flag = 1; +static int __init nokgdb(char *str) +{ + kgdb_flag = 0; + return 1; +} +__setup("nokgdb", nokgdb); +#endif + +void __init init_IRQ(void) { int i; @@ -818,7 +826,18 @@ void __init init_generic_irq(void) irq_desc[i].action = NULL; irq_desc[i].depth = 1; irq_desc[i].handler = &no_irq_type; + irq_desc[i].lock = SPIN_LOCK_UNLOCKED; + } + + arch_init_irq(); + +#ifdef CONFIG_KGDB + if (kgdb_flag) { + printk("Wait for gdb client connection ...\n"); + set_debug_traps(); + breakpoint(); } +#endif } EXPORT_SYMBOL(disable_irq_nosync); @@ -833,7 +852,7 @@ static struct proc_dir_entry * irq_dir [ static struct proc_dir_entry * smp_affinity_entry [NR_IRQS]; -static cpumask_t irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = ~0UL }; +static cpumask_t irq_affinity [NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL }; static int irq_affinity_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data) { diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/Makefile rbtx/arch/mips/kernel/Makefile --- linux-2.6.8.1.orig/arch/mips/kernel/Makefile 2004-08-14 03:55:19.000000000 -0700 +++ rbtx/arch/mips/kernel/Makefile 2004-10-19 14:22:31.000000000 -0700 @@ -2,7 +2,10 @@ # Makefile for the Linux/MIPS kernel. # + +# if < 2.6.9-rc1 extra-y := head.o init_task.o vmlinux.lds.s +#extra-y := head.o init_task.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \ @@ -53,7 +56,10 @@ obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_MIPS64) += cpu-bugs64.o +ifndef CONFIG_TX_BOARDS +# use native get_rtc_time,set_rtc_time,etc. obj-$(CONFIG_GEN_RTC) += genrtc.o +endif CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) CFLAGS_ioctl32.o += -Ifs/ diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/mips_ksyms.c rbtx/arch/mips/kernel/mips_ksyms.c --- linux-2.6.8.1.orig/arch/mips/kernel/mips_ksyms.c 2004-08-14 03:54:51.000000000 -0700 +++ rbtx/arch/mips/kernel/mips_ksyms.c 2004-10-19 14:22:31.000000000 -0700 @@ -34,7 +34,10 @@ EXPORT_SYMBOL_NOVERS(memmove); EXPORT_SYMBOL_NOVERS(strcat); EXPORT_SYMBOL_NOVERS(strchr); #ifdef CONFIG_MIPS64 +EXPORT_SYMBOL_NOVERS(strcmp); +EXPORT_SYMBOL_NOVERS(strcpy); EXPORT_SYMBOL_NOVERS(strncmp); +EXPORT_SYMBOL_NOVERS(strncpy); #endif EXPORT_SYMBOL_NOVERS(strlen); EXPORT_SYMBOL_NOVERS(strpbrk); diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/process.c rbtx/arch/mips/kernel/process.c --- linux-2.6.8.1.orig/arch/mips/kernel/process.c 2004-08-14 03:55:19.000000000 -0700 +++ rbtx/arch/mips/kernel/process.c 2004-10-19 14:22:31.000000000 -0700 @@ -191,21 +191,41 @@ long kernel_thread(int (*fn)(void *), vo } struct mips_frame_info { + void *func; + int omit_fp; /* compiled without fno-omit-frame-pointer */ int frame_offset; int pc_offset; +} mfinfo [] = { + /* must be in address order */ + { __down_interruptible, 1 }, + { schedule, 0 }, +#define schedule_frame 1 +#ifdef CONFIG_PREEMPT + { preempt_schedule, 0 }, +#endif + { wait_for_completion, 0 }, + { interruptible_sleep_on, 0 }, + { interruptible_sleep_on_timeout, 0 }, + { sleep_on, 0 }, + { sleep_on_timeout, 0 }, + { __cond_resched, 0 }, + { yield, 0 }, + { io_schedule, 0 }, + { io_schedule_timeout, 0 }, + { schedule_timeout, 1 }, +/* { nanosleep_restart, 1 }, */ + { __down_read, 1 }, + { __down_write, 1 }, }; -static struct mips_frame_info schedule_frame; -static struct mips_frame_info schedule_timeout_frame; -static struct mips_frame_info sleep_on_frame; -static struct mips_frame_info sleep_on_timeout_frame; -static struct mips_frame_info wait_for_completion_frame; + static int mips_frame_info_initialized; -static int __init get_frame_info(struct mips_frame_info *info, void *func) +static int __init get_frame_info(struct mips_frame_info *info) { int i; + void *func = info->func; union mips_instruction *ip = (union mips_instruction *)func; info->pc_offset = -1; - info->frame_offset = -1; + info->frame_offset = info->omit_fp ? 0 : -1; for (i = 0; i < 128; i++, ip++) { /* if jal, jalr, jr, stop. */ if (ip->j_format.opcode == jal_op || @@ -251,13 +271,11 @@ static int __init get_frame_info(struct static int __init frame_info_init(void) { - mips_frame_info_initialized = - !get_frame_info(&schedule_frame, schedule) && - !get_frame_info(&schedule_timeout_frame, schedule_timeout) && - !get_frame_info(&sleep_on_frame, sleep_on) && - !get_frame_info(&sleep_on_timeout_frame, sleep_on_timeout) && - !get_frame_info(&wait_for_completion_frame, wait_for_completion); - + int i; + for (i = 0; i < ARRAY_SIZE(mfinfo); i++) + if (get_frame_info(&mfinfo[i])) + return -1; + mips_frame_info_initialized = 1; return 0; } @@ -275,9 +293,9 @@ unsigned long thread_saved_pc(struct tas if (t->reg31 == (unsigned long) ret_from_fork) return t->reg31; - if (schedule_frame.pc_offset < 0) + if (mfinfo[schedule_frame].pc_offset < 0) return 0; - return ((unsigned long *)t->reg29)[schedule_frame.pc_offset]; + return ((unsigned long *)t->reg29)[mfinfo[schedule_frame].pc_offset]; } /* get_wchan - a maintenance nightmare^W^Wpain in the ass ... */ @@ -291,48 +309,27 @@ unsigned long get_wchan(struct task_stru if (!mips_frame_info_initialized) return 0; pc = thread_saved_pc(p); + if (!in_sched_functions(pc)) goto out; - if (pc >= (unsigned long) sleep_on_timeout) - goto schedule_timeout_caller; - if (pc >= (unsigned long) sleep_on) - goto schedule_caller; - if (pc >= (unsigned long) interruptible_sleep_on_timeout) - goto schedule_timeout_caller; - if (pc >= (unsigned long)interruptible_sleep_on) - goto schedule_caller; - if (pc >= (unsigned long)wait_for_completion) - goto schedule_caller; - goto schedule_timeout_caller; - -schedule_caller: - frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset]; - if (pc >= (unsigned long) sleep_on) - pc = ((unsigned long *)frame)[sleep_on_frame.pc_offset]; - else - pc = ((unsigned long *)frame)[wait_for_completion_frame.pc_offset]; - goto out; - -schedule_timeout_caller: - /* - * The schedule_timeout frame - */ - frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset]; - - /* - * frame now points to sleep_on_timeout's frame - */ - pc = ((unsigned long *)frame)[schedule_timeout_frame.pc_offset]; - - if (in_sched_functions(pc)) { - /* schedule_timeout called by [interruptible_]sleep_on_timeout */ - frame = ((unsigned long *)frame)[schedule_timeout_frame.frame_offset]; - pc = ((unsigned long *)frame)[sleep_on_timeout_frame.pc_offset]; - } + frame = ((unsigned long *)p->thread.reg30)[mfinfo[schedule_frame].frame_offset]; + do { + int i; + for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) { + if (pc >= (unsigned long) mfinfo[i].func) + break; + } + if (i < 0) + break; -out: + if (mfinfo[i].omit_fp) + break; + pc = ((unsigned long *)frame)[mfinfo[i].pc_offset]; + frame = ((unsigned long *)frame)[mfinfo[i].frame_offset]; + } while (in_sched_functions(pc)); +out: #ifdef CONFIG_MIPS64 if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps */ pc &= 0xffffffffUL; diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/scall32-o32.S rbtx/arch/mips/kernel/scall32-o32.S --- linux-2.6.8.1.orig/arch/mips/kernel/scall32-o32.S 2004-08-14 03:54:49.000000000 -0700 +++ rbtx/arch/mips/kernel/scall32-o32.S 2004-10-19 14:22:31.000000000 -0700 @@ -17,6 +17,7 @@ #include #include #include +#include #include /* Highest syscall used of any syscall flavour */ @@ -199,7 +200,11 @@ illegal_syscall: 1: ll v0, (a1) move a0, a2 2: sc a0, (a1) +#if R10000_LLSC_WAR + beqzl a0, 1b +#else beqz a0, 1b +#endif .section __ex_table,"a" PTR 1b, bad_stack @@ -618,7 +623,7 @@ out: jr ra sys sys_clock_nanosleep 4 /* 4265 */ sys sys_tgkill 3 sys sys_utimes 2 - sys sys_ni_syscall 0 /* sys_mbind */ + sys sys_mbind 4 sys sys_ni_syscall 0 /* sys_get_mempolicy */ sys sys_ni_syscall 0 /* 4270 sys_set_mempolicy */ sys sys_mq_open 4 diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/semaphore.c rbtx/arch/mips/kernel/semaphore.c --- linux-2.6.8.1.orig/arch/mips/kernel/semaphore.c 2004-08-14 03:55:35.000000000 -0700 +++ rbtx/arch/mips/kernel/semaphore.c 2004-10-19 14:22:31.000000000 -0700 @@ -20,11 +20,10 @@ #include #include #include -#include +#include #include - -#ifdef CONFIG_CPU_HAS_LLSC - +#include +#include /* * Atomically update sem->count. * This does the equivalent of the following: @@ -33,50 +32,51 @@ * tmp = MAX(old_count, 0) + incr; * sem->count = tmp; * return old_count; - */ -static inline int __sem_update_count(struct semaphore *sem, int incr) -{ - int old_count, tmp; - - __asm__ __volatile__( - "1: ll %0, %2 \n" - " sra %1, %0, 31 \n" - " not %1 \n" - " and %1, %0, %1 \n" - " add %1, %1, %3 \n" - " sc %1, %2 \n" - " beqz %1, 1b \n" - : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) - : "r" (incr), "m" (sem->count)); - - return old_count; -} - -#else - -/* + * * On machines without lld/scd we need a spinlock to make the manipulation of * sem->count and sem->waking atomic. Scalability isn't an issue because * this lock is used on UP only so it's just an empty variable. */ -static spinlock_t semaphore_lock = SPIN_LOCK_UNLOCKED; - static inline int __sem_update_count(struct semaphore *sem, int incr) { - unsigned long flags; int old_count, tmp; - spin_lock_irqsave(&semaphore_lock, flags); - old_count = atomic_read(&sem->count); - tmp = max_t(int, old_count, 0) + incr; - atomic_set(&sem->count, tmp); - spin_unlock_irqrestore(&semaphore_lock, flags); + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + "1: ll %0, %2 \n" + " sra %1, %0, 31 \n" + " not %1 \n" + " and %1, %0, %1 \n" + " add %1, %1, %3 \n" + " sc %1, %2 \n" + " beqzl %1, 1b \n" + : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) + : "r" (incr), "m" (sem->count)); + } else if (cpu_has_llsc) { + __asm__ __volatile__( + "1: ll %0, %2 \n" + " sra %1, %0, 31 \n" + " not %1 \n" + " and %1, %0, %1 \n" + " add %1, %1, %3 \n" + " sc %1, %2 \n" + " beqz %1, 1b \n" + : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) + : "r" (incr), "m" (sem->count)); + } else { + static spinlock_t semaphore_lock = SPIN_LOCK_UNLOCKED; + unsigned long flags; + + spin_lock_irqsave(&semaphore_lock, flags); + old_count = atomic_read(&sem->count); + tmp = max_t(int, old_count, 0) + incr; + atomic_set(&sem->count, tmp); + spin_unlock_irqrestore(&semaphore_lock, flags); + } return old_count; } -#endif - void __up(struct semaphore *sem) { /* diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/setup.c rbtx/arch/mips/kernel/setup.c --- linux-2.6.8.1.orig/arch/mips/kernel/setup.c 2004-08-14 03:54:51.000000000 -0700 +++ rbtx/arch/mips/kernel/setup.c 2004-10-19 14:22:31.000000000 -0700 @@ -211,12 +211,12 @@ static inline void bootmem_init(void) #endif #ifdef CONFIG_BLK_DEV_INITRD unsigned long tmp; - unsigned long *initrd_header; + u32 *initrd_header; - tmp = (((unsigned long)&_end + PAGE_SIZE-1) & PAGE_MASK) - 8; + tmp = (((unsigned long)&_end + PAGE_SIZE-1) & PAGE_MASK) - sizeof(u32) * 2; if (tmp < (unsigned long)&_end) tmp += PAGE_SIZE; - initrd_header = (unsigned long *)tmp; + initrd_header = (u32 *)tmp; if (initrd_header[0] == 0x494E5244) { initrd_start = (unsigned long)&initrd_header[2]; initrd_end = initrd_start + initrd_header[1]; diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/signal.c rbtx/arch/mips/kernel/signal.c --- linux-2.6.8.1.orig/arch/mips/kernel/signal.c 2004-08-14 03:55:48.000000000 -0700 +++ rbtx/arch/mips/kernel/signal.c 2004-10-19 14:22:31.000000000 -0700 @@ -6,8 +6,10 @@ * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 1994 - 2000 Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2004 Maciej W. Rozycki */ #include +#include #include #include #include @@ -41,7 +43,9 @@ extern asmlinkage int do_signal(sigset_t #ifdef CONFIG_TRAD_SIGNALS save_static_function(sys_sigsuspend); -static_unused int _sys_sigsuspend(struct pt_regs regs) +static int _sys_sigsuspend(struct pt_regs regs) + __asm__("_sys_sigsuspend") __attribute_used__; +static int _sys_sigsuspend(struct pt_regs regs) { sigset_t *uset, saveset, newset; @@ -68,7 +72,9 @@ static_unused int _sys_sigsuspend(struct #endif save_static_function(sys_rt_sigsuspend); -static_unused int _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) +static int _sys_rt_sigsuspend(struct pt_regs regs) + __asm__("_sys_rt_sigsuspend") __attribute_used__; +static int _sys_rt_sigsuspend(struct pt_regs regs) { sigset_t *unewset, saveset, newset; size_t sigsetsize; diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/syscall.c rbtx/arch/mips/kernel/syscall.c --- linux-2.6.8.1.orig/arch/mips/kernel/syscall.c 2004-08-14 03:55:59.000000000 -0700 +++ rbtx/arch/mips/kernel/syscall.c 2004-10-19 14:22:31.000000000 -0700 @@ -6,6 +6,7 @@ * Copyright (C) 1995, 1996, 1997, 2000, 2001 by Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. * Copyright (C) 2001 MIPS Technologies, Inc. + * Copyright (C) 2004 Maciej W. Rozycki */ #include #include @@ -65,7 +66,7 @@ unsigned long arch_get_unmapped_area(str int do_color_align; unsigned long task_size; -#if CONFIG_MIPS32 +#ifdef CONFIG_MIPS32 task_size = TASK_SIZE; #else task_size = (current->thread.mflags & MF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE; @@ -162,13 +163,17 @@ sys_mmap2(unsigned long addr, unsigned l } save_static_function(sys_fork); -static_unused int _sys_fork(nabi_no_regargs struct pt_regs regs) +static int _sys_fork(struct pt_regs regs) + __asm__("_sys_fork") __attribute_used__; +static int _sys_fork(struct pt_regs regs) { return do_fork(SIGCHLD, regs.regs[29], ®s, 0, NULL, NULL); } save_static_function(sys_clone); -static_unused int _sys_clone(nabi_no_regargs struct pt_regs regs) +static int _sys_clone(struct pt_regs regs) + __asm__("_sys_clone") __attribute_used__; +static int _sys_clone(struct pt_regs regs) { unsigned long clone_flags; unsigned long newsp; @@ -283,6 +288,24 @@ asmlinkage int _sys_sysmips(int cmd, lon case MIPS_RDNVRAM: return -EIO; +#ifdef MIPS_FP_EFLAG + case MIPS_FP_EFLAG: { + int retval = (current->thread.mflags & MF_FPEFLAG) ? 1 : 0; + switch (arg1) { + case 0: /* test */ + break; + case 1: /* clear */ + current->thread.mflags &= ~MF_FPEFLAG; + break; + case 2: /* set */ + current->thread.mflags |= ~MF_FPEFLAG; + break; + default: + retval = -EINVAL; + } + return retval; + } +#endif } return -EINVAL; diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/time.c rbtx/arch/mips/kernel/time.c --- linux-2.6.8.1.orig/arch/mips/kernel/time.c 2004-08-14 03:55:20.000000000 -0700 +++ rbtx/arch/mips/kernel/time.c 2004-10-19 14:22:31.000000000 -0700 @@ -278,7 +278,7 @@ static unsigned long fixed_rate_gettimeo __asm__("multu %1,%2" : "=h" (res) : "r" (count), "r" (sll32_usecs_per_cycle) - : "lo", "accum"); + : CLOBBER_LO); /* * Due to possible jiffies inconsistencies, we need to check @@ -333,7 +333,7 @@ static unsigned long calibrate_div32_get __asm__("multu %1,%2" : "=h" (res) : "r" (count), "r" (quotient) - : "lo", "accum"); + : CLOBBER_LO); /* * Due to possible jiffies inconsistencies, we need to check @@ -375,7 +375,7 @@ static unsigned long calibrate_div64_get : "r" (timerhi), "m" (timerlo), "r" (tmp), "r" (USECS_PER_JIFFY), "r" (USECS_PER_JIFFY_FRAC) - : "hi", "lo", "accum"); + : CLOBBER_HILO); cached_quotient = quotient; } } @@ -389,7 +389,7 @@ static unsigned long calibrate_div64_get __asm__("multu %1,%2" : "=h" (res) : "r" (count), "r" (quotient) - : "lo", "accum"); + : CLOBBER_LO); /* * Due to possible jiffies inconsistencies, we need to check diff -pruN linux-2.6.8.1.orig/arch/mips/kernel/traps.c rbtx/arch/mips/kernel/traps.c --- linux-2.6.8.1.orig/arch/mips/kernel/traps.c 2004-08-14 03:55:20.000000000 -0700 +++ rbtx/arch/mips/kernel/traps.c 2004-10-19 14:22:31.000000000 -0700 @@ -515,6 +515,9 @@ asmlinkage void do_fpe(struct pt_regs *r * the cause bit set in $fcr31. */ current->thread.fpu.soft.fcr31 &= ~FPU_CSR_ALL_X; +#ifdef MF_FPEFLAG + current->thread.mflags |= MF_FPEFLAG; +#endif /* Restore the hardware register state */ restore_fp(current); diff -pruN linux-2.6.8.1.orig/arch/mips/Makefile rbtx/arch/mips/Makefile --- linux-2.6.8.1.orig/arch/mips/Makefile 2004-08-14 03:54:47.000000000 -0700 +++ rbtx/arch/mips/Makefile 2004-10-19 14:22:31.000000000 -0700 @@ -12,6 +12,9 @@ # for "archclean" cleaning up for this architecture. # +# if < 2.6.9-rc1 +cc-option = $(call check_gcc, $(1),$(2)) + # # Select the object file format to substitute into the linker script. # @@ -35,7 +38,11 @@ UTS_MACHINE := mips endif ifdef CONFIG_MIPS64 gcc-abi = 64 +ifdef CONFIG_TX_BOARDS +gas-abi = 64 +else gas-abi = 32 +endif tool-prefix = $(64bit-tool-prefix) UTS_MACHINE := mips64 endif @@ -56,14 +63,12 @@ endif # cflags-y := -I $(TOPDIR)/include/asm/gcc cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -cflags-y += $(call check_gcc, -finline-limit=100000,) +cflags-y += $(call cc-option, -finline-limit=100000) LDFLAGS_vmlinux += -G 0 -static -n MODFLAGS += -mlong-calls cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer -check_warning = $(shell if $(CC) $(1) -c -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi) - # # Use: $(call set_gccflags,,,,,) # @@ -143,6 +148,10 @@ cflags-$(CONFIG_CPU_R4X00) += \ $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ -Wa,--trap +cflags-$(CONFIG_CPU_TX49XX) += \ + $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ + -Wa,--trap + cflags-$(CONFIG_CPU_MIPS32) += \ $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ -Wa,--trap @@ -162,7 +171,7 @@ cflags-$(CONFIG_CPU_R5432) += \ cflags-$(CONFIG_CPU_NEVADA) += \ $(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \ -Wa,--trap -# $(call check_gcc,-mmad,) +# $(call cc-option,-mmad) cflags-$(CONFIG_CPU_RM7000) += \ $(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \ @@ -538,18 +547,13 @@ endif # SGI-IP32 (O2) # # Set the load address to >= 80069000 if you want to leave space for symmon, -# 0x80002000 for production kernels. Note that the value must be aligned to +# 0x80004000 for production kernels. Note that the value must be aligned to # a multiple of the kernel stack size or the handling of the current variable -# will break so for 64-bit kernels we have to raise the start address by 8kb. +# will break. # core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/ cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32 -ifdef CONFIG_MIPS32 -load-$(CONFIG_SGI_IP32) += 0x80002000 -endif -ifdef CONFIG_MIPS64 load-$(CONFIG_SGI_IP32) += 0x80004000 -endif # # Sibyte SB1250 SOC @@ -604,6 +608,21 @@ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/ load-$(CONFIG_TOSHIBA_RBTX4927) += 0x80020000 +# +# TX-RISC boards +# +libs-$(CONFIG_TX_BOARDS) += arch/mips/tx-boards/generic/ +cflags-$(CONFIG_TX_BOARDS) += -Iinclude/asm-mips/mach-tx +ifdef CONFIG_MIPS32 +load-$(CONFIG_TX_BOARDS) += 0x80100000 +endif +ifdef CONFIG_MIPS64 +load-$(CONFIG_TX_BOARDS) += 0xffffffff80020000 +#load-$(CONFIG_TX_BOARDS) += 0x9800000000020000 +endif +core-$(CONFIG_TX_RBTX4927) += arch/mips/tx-boards/rbtx4927/ +core-$(CONFIG_TX_RBTX4938) += arch/mips/tx-boards/rbtx4938/ + cflags-y += -Iinclude/asm-mips/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ @@ -637,21 +656,32 @@ endif #AS += -64 #LDFLAGS += -m elf64bmip +AFLAGS += $(cflags-y) +CFLAGS += $(cflags-y) + +ifdef CONFIG_TX_BOARDS +LDFLAGS += --oformat $(build-bfd) +else +LDFLAGS += --oformat $(32bit-bfd) +endif + # # Choosing incompatible machines durings configuration will result in # error messages during linking. Select a default linkscript if # none has been choosen above. # +# if < 2.6.9-rc1 AFLAGS_vmlinux.lds.o := \ + $(CFLAGS) \ -D"LOADADDR=$(load-y)" \ -D"JIFFIES=$(JIFFIES)" \ -imacros $(srctree)/include/asm-$(ARCH)/sn/mapped_kernel.h - -AFLAGS += $(cflags-y) -CFLAGS += $(cflags-y) - -LDFLAGS += --oformat $(32bit-bfd) +#CPPFLAGS_vmlinux.lds := \ +# $(CFLAGS) \ +# -D"LOADADDR=$(load-y)" \ +# -D"JIFFIES=$(JIFFIES)" \ +# -imacros $(srctree)/include/asm-$(ARCH)/sn/mapped_kernel.h head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o @@ -695,6 +725,23 @@ ifdef CONFIG_SNI_RM200_PCI all: vmlinux.ecoff endif +ifdef CONFIG_TX_BOARDS +all: vmlinux.elf + +#vmlinux.32: vmlinux +# $(OBJCOPY) -O $(32bit-bfd) --remove-section=.reginfo --change-addresses 0x80000000 $< $@ +vmlinux.32: vmlinux + $(OBJCOPY) -O $(32bit-bfd) --remove-section=.reginfo $< $@ + +ifdef CONFIG_MIPS64 +vmlinux.elf: vmlinux.32 + +@$(call makeboot,$@) +else +vmlinux.elf: vmlinux + +@$(call makeboot,$@) +endif +endif + vmlinux.ecoff vmlinux.rm200: vmlinux +@$(call makeboot,$@) diff -pruN linux-2.6.8.1.orig/arch/mips/math-emu/cp1emu.c rbtx/arch/mips/math-emu/cp1emu.c --- linux-2.6.8.1.orig/arch/mips/math-emu/cp1emu.c 2004-08-14 03:56:15.000000000 -0700 +++ rbtx/arch/mips/math-emu/cp1emu.c 2004-10-19 14:22:31.000000000 -0700 @@ -528,9 +528,9 @@ static int cop1Emulate(struct pt_regs *x if (MIPSInst_FUNC(ir) != movc_op) return SIGILL; cond = fpucondbit[MIPSInst_RT(ir) >> 2]; - if (((ctx->fcr31 & cond) != 0) != ((MIPSInst_RT(ir) & 1) != 0)) - return 0; - xcp->regs[MIPSInst_RD(ir)] = xcp->regs[MIPSInst_RS(ir)]; + if (((ctx->fcr31 & cond) != 0) == ((MIPSInst_RT(ir) & 1) != 0)) + xcp->regs[MIPSInst_RD(ir)] = + xcp->regs[MIPSInst_RS(ir)]; break; #endif diff -pruN linux-2.6.8.1.orig/arch/mips/math-emu/dp_simple.c rbtx/arch/mips/math-emu/dp_simple.c --- linux-2.6.8.1.orig/arch/mips/math-emu/dp_simple.c 2004-08-14 03:55:59.000000000 -0700 +++ rbtx/arch/mips/math-emu/dp_simple.c 2004-10-19 14:22:31.000000000 -0700 @@ -48,6 +48,20 @@ ieee754dp ieee754dp_neg(ieee754dp x) CLEARCX; FLUSHXDP; +#if 1 /* XXX: returning same sign causes stack overflow on pow() of libc 2.2.4 */ + /* quick fix up */ + DPSIGN(x) ^= 1; + + if (xc == IEEE754_CLASS_SNAN) { + ieee754dp y = ieee754dp_indef(); + SETCX(IEEE754_INVALID_OPERATION); + DPSIGN(y) = DPSIGN(x); + return ieee754dp_nanxcpt(y, "neg"); + } + + if (ieee754dp_isnan(x)) /* but not infinity */ + return ieee754dp_nanxcpt(x, "neg", x); +#else if (xc == IEEE754_CLASS_SNAN) { SETCX(IEEE754_INVALID_OPERATION); return ieee754dp_nanxcpt(ieee754dp_indef(), "neg"); @@ -58,6 +72,7 @@ ieee754dp ieee754dp_neg(ieee754dp x) /* quick fix up */ DPSIGN(x) ^= 1; +#endif return x; } diff -pruN linux-2.6.8.1.orig/arch/mips/math-emu/sp_simple.c rbtx/arch/mips/math-emu/sp_simple.c --- linux-2.6.8.1.orig/arch/mips/math-emu/sp_simple.c 2004-08-14 03:55:33.000000000 -0700 +++ rbtx/arch/mips/math-emu/sp_simple.c 2004-10-19 14:22:31.000000000 -0700 @@ -48,6 +48,20 @@ ieee754sp ieee754sp_neg(ieee754sp x) CLEARCX; FLUSHXSP; +#if 1 /* XXX: returning same sign causes stack overflow on pow() of libc 2.2.4 */ + /* quick fix up */ + SPSIGN(x) ^= 1; + + if (xc == IEEE754_CLASS_SNAN) { + ieee754sp y = ieee754sp_indef(); + SETCX(IEEE754_INVALID_OPERATION); + SPSIGN(y) = SPSIGN(x); + return ieee754sp_nanxcpt(y, "neg"); + } + + if (ieee754sp_isnan(x)) /* but not infinity */ + return ieee754sp_nanxcpt(x, "neg", x); +#else if (xc == IEEE754_CLASS_SNAN) { SETCX(IEEE754_INVALID_OPERATION); return ieee754sp_nanxcpt(ieee754sp_indef(), "neg"); @@ -58,6 +72,7 @@ ieee754sp ieee754sp_neg(ieee754sp x) /* quick fix up */ SPSIGN(x) ^= 1; +#endif return x; } diff -pruN linux-2.6.8.1.orig/arch/mips/mm/c-r4k.c rbtx/arch/mips/mm/c-r4k.c --- linux-2.6.8.1.orig/arch/mips/mm/c-r4k.c 2004-08-14 03:56:22.000000000 -0700 +++ rbtx/arch/mips/mm/c-r4k.c 2004-10-19 14:22:31.000000000 -0700 @@ -86,7 +86,7 @@ static inline void r4k_blast_dcache_page static void (* r4k_blast_dcache)(void); -static void r4k_blast_dcache_setup(void) +static inline void r4k_blast_dcache_setup(void) { unsigned long dc_lsize = cpu_dcache_line_size(); @@ -385,6 +385,7 @@ static void r4k_flush_data_cache_page(un static void r4k_flush_icache_range(unsigned long start, unsigned long end) { unsigned long dc_lsize = current_cpu_data.dcache.linesz; + unsigned long ic_lsize = current_cpu_data.icache.linesz; unsigned long addr, aend; if (!cpu_has_ic_fills_f_dc) { @@ -407,14 +408,14 @@ static void r4k_flush_icache_range(unsig if (end - start > icache_size) r4k_blast_icache(); else { - addr = start & ~(dc_lsize - 1); - aend = (end - 1) & ~(dc_lsize - 1); + addr = start & ~(ic_lsize - 1); + aend = (end - 1) & ~(ic_lsize - 1); while (1) { /* Hit_Invalidate_I */ protected_flush_icache_line(addr); if (addr == aend) break; - addr += dc_lsize; + addr += ic_lsize; } } } @@ -587,10 +588,10 @@ static void r4k_flush_cache_sigtramp(uns ".set push\n\t" ".set noat\n\t" ".set mips3\n\t" -#if CONFIG_MIPS32 +#ifdef CONFIG_MIPS32 "la $at,1f\n\t" #endif -#if CONFIG_MIPS64 +#ifdef CONFIG_MIPS64 "dla $at,1f\n\t" #endif "cache %0,($at)\n\t" diff -pruN linux-2.6.8.1.orig/arch/mips/mm/Makefile rbtx/arch/mips/mm/Makefile --- linux-2.6.8.1.orig/arch/mips/mm/Makefile 2004-08-14 03:55:35.000000000 -0700 +++ rbtx/arch/mips/mm/Makefile 2004-10-19 14:22:31.000000000 -0700 @@ -47,6 +47,7 @@ obj-$(CONFIG_CPU_SB1) += tlbex32-r4k.o obj-$(CONFIG_CPU_TX39XX) += tlbex32-r3k.o endif ifdef CONFIG_MIPS64 +obj-$(CONFIG_CPU_TX49XX) += tlb64-glue-r4k.o tlbex64-r4k.o obj-$(CONFIG_CPU_R4300) += tlb64-glue-r4k.o tlbex64-r4k.o obj-$(CONFIG_CPU_R4X00) += tlb64-glue-r4k.o tlbex64-r4k.o obj-$(CONFIG_CPU_R5000) += tlb64-glue-r4k.o tlbex64-r4k.o diff -pruN linux-2.6.8.1.orig/arch/mips/mm/pg-r4k.c rbtx/arch/mips/mm/pg-r4k.c --- linux-2.6.8.1.orig/arch/mips/mm/pg-r4k.c 2004-08-14 03:55:32.000000000 -0700 +++ rbtx/arch/mips/mm/pg-r4k.c 2004-10-19 14:22:31.000000000 -0700 @@ -356,7 +356,7 @@ void __init build_clear_page(void) case CPU_R10000: case CPU_R12000: pref_src_mode = Pref_LoadStreamed; - pref_dst_mode = Pref_StoreRetained; + pref_dst_mode = Pref_StoreStreamed; break; default: diff -pruN linux-2.6.8.1.orig/arch/mips/mm/tlbex32-r4k.S rbtx/arch/mips/mm/tlbex32-r4k.S --- linux-2.6.8.1.orig/arch/mips/mm/tlbex32-r4k.S 2004-08-14 03:56:22.000000000 -0700 +++ rbtx/arch/mips/mm/tlbex32-r4k.S 2004-10-19 14:22:31.000000000 -0700 @@ -180,6 +180,13 @@ mtc0_tlbw_hazard tlbwr # write random tlb entry tlbw_eret_hazard +#if 1 + /* If insn which cause TLB refill uses k0/k1 as base register, + * leaving variable data in k0/k1 may cause an another TLB refill + * exception. (and system hangs...) */ + move k0, zero + move k1, zero +#endif eret # return from trap END(except_vec0_r4000) diff -pruN linux-2.6.8.1.orig/arch/mips/pci/pci.c rbtx/arch/mips/pci/pci.c --- linux-2.6.8.1.orig/arch/mips/pci/pci.c 2004-08-14 03:55:34.000000000 -0700 +++ rbtx/arch/mips/pci/pci.c 2004-10-19 14:22:31.000000000 -0700 @@ -4,7 +4,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) */ #include #include @@ -14,8 +14,6 @@ #include #include -#include - /* * Indicate whether we respect the PCI setup left by the firmware. * @@ -183,6 +181,18 @@ static int pcibios_enable_resources(stru } if (dev->resource[PCI_ROM_RESOURCE].start) cmd |= PCI_COMMAND_MEMORY; +#ifdef CONFIG_TX_BOARDS /* from 2.4 drivers/pci/setup-res.c */ + /* All of these (may) have I/O scattered all around and may not + use I/O base address registers at all. So we just have to + always enable IO to these devices. */ + if ((dev->class >> 8) == PCI_CLASS_NOT_DEFINED + || (dev->class >> 8) == PCI_CLASS_NOT_DEFINED_VGA + || (dev->class >> 8) == PCI_CLASS_STORAGE_IDE + || (dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + cmd |= PCI_COMMAND_IO; + } +#endif + if (cmd != old_cmd) { printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); @@ -296,9 +306,13 @@ pcibios_resource_to_bus(struct pci_dev * #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(PCIBIOS_MIN_IO); +EXPORT_SYMBOL(PCIBIOS_MIN_MEM); #endif +#ifndef CONFIG_TX_BOARDS char *pcibios_setup(char *str) { return str; } +#endif diff -pruN linux-2.6.8.1.orig/arch/mips/tx-boards/generic/dma.c rbtx/arch/mips/tx-boards/generic/dma.c --- linux-2.6.8.1.orig/arch/mips/tx-boards/generic/dma.c 1969-12-31 16:00:00.000000000 -0800 +++ rbtx/arch/mips/tx-boards/generic/dma.c 2004-10-19 14:22:31.000000000 -0700 @@ -0,0 +1,112 @@ +/* + * linux/arch/mips/tx-boards/generic/dma.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright TOSHIBA CORPORATION 2004 + * All Rights Reserved. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct txx9_dma_ops *txx9_dma_ops; +EXPORT_SYMBOL(txx9_dma_ops); + +/* DMA channel allocator. Based on kernel/dma.c */ + +/* Channel n is busy iff dma_chan_busy[n].lock != 0. + * DMA0 used to be reserved for DRAM refresh, but apparently not any more... + * DMA4 is reserved for cascading. + */ + +struct txx9_dma_chan { + int lock; + const char *device_id; +}; + +static struct txx9_dma_chan txx9_dma_chan_busy[MAX_TXX9_DMA_CHANNELS]; + +int request_txx9_dma(unsigned int dmanr, const char * device_id) +{ + if (dmanr >= MAX_TXX9_DMA_CHANNELS) + return -EINVAL; + + if (xchg(&txx9_dma_chan_busy[dmanr].lock, 1) != 0) + return -EBUSY; + + txx9_dma_chan_busy[dmanr].device_id = device_id; + + /* old flag was 0, now contains 1 to indicate busy */ + return 0; +} /* request_txx9_dma */ + + +void free_txx9_dma(unsigned int dmanr) +{ + if (dmanr >= MAX_TXX9_DMA_CHANNELS) { + printk(KERN_WARNING "Trying to free DMA%d\n", dmanr); + return; + } + + if (xchg(&txx9_dma_chan_busy[dmanr].lock, 0) == 0) { + printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr); + return; + } + +} /* free_txx9_dma */ + +#ifdef CONFIG_PROC_FS + +static int proc_txx9_dma_show(struct seq_file *m, void *v) +{ + int i; + + for (i = 0 ; i < MAX_TXX9_DMA_CHANNELS ; i++) { + if (txx9_dma_chan_busy[i].lock) { + seq_printf(m, "%2d: %s\n", i, + txx9_dma_chan_busy[i].device_id); + } + } + return 0; +} + +static int proc_txx9_dma_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_txx9_dma_show, NULL); +} + +static struct file_operations proc_txx9_dma_operations = { + .open = proc_txx9_dma_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_txx9_dma_init(void) +{ + struct proc_dir_entry *e; + + e = create_proc_entry("tx-boards/txx9_dma", 0, NULL); + if (e) + e->proc_fops = &proc_txx9_dma_operations; + + return 0; +} + +__initcall(proc_txx9_dma_init); +#endif + +EXPORT_SYMBOL(request_txx9_dma); +EXPORT_SYMBOL(free_txx9_dma); diff -pruN linux-2.6.8.1.orig/arch/mips/tx-boards/generic/dma_tx4927.c rbtx/arch/mips/tx-boards/generic/dma_tx4927.c --- linux-2.6.8.1.orig/arch/mips/tx-boards/generic/dma_tx4927.c 1969-12-31 16:00:00.000000000 -0800 +++ rbtx/arch/mips/tx-boards/generic/dma_tx4927.c 2004-10-19 14:22:31.000000000 -0700 @@ -0,0 +1,351 @@ +/* + * linux/arch/mips/tx-boards/generic/dma_tx4927.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright TOSHIBA CORPORATION 2004 + * All Rights Reserved. + * + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* TX4927 stype DMA controller */ + +static struct tx4927_dma_reg *tx4927_dmaptrs[2]; +static int tx4927_dmairqs[2]; + +/* reset a specific DMA channel */ +static void +init_tx4927_dma(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].ccr = TX4927_DMA_CCR_CHRST; + dmaptr->ch[ch].cha = 0; + dmaptr->ch[ch].sar = 0; + dmaptr->ch[ch].dar = 0; + dmaptr->ch[ch].cntr = 0; + dmaptr->ch[ch].sair = 0; + dmaptr->ch[ch].dair = 0; + dmaptr->ch[ch].ccr = 0; +} + +/* enable/disable a specific DMA channel */ +static void +enable_tx4927_dma(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].ccr |= TX4927_DMA_CCR_XFACT; +} + +static void +disable_tx4927_dma(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].ccr &= ~TX4927_DMA_CCR_XFACT; +} + +/* set mode for a specific DMA channel */ +static void +set_tx4927_dma_mode(unsigned int dmanr, unsigned int mode) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; +#ifdef __LITTLE_ENDIAN + mode |= TX4927_DMA_CCR_LE; +#endif + dmaptr->ch[ch].ccr = mode; +} + +/* Set source/destination address for specific DMA channel. + */ +static void +set_tx4927_dma_addr(unsigned int dmanr, + dma_addr_t sa, + dma_addr_t da) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].sar = sa; + dmaptr->ch[ch].dar = da; +} +static void +set_tx4927_dma_addr64(unsigned int dmanr, + dma64_addr_t sa, + dma64_addr_t da) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].sar = sa; + dmaptr->ch[ch].dar = da; +} + +/* Set transfer size for a specific DMA channel. + */ +static void +set_tx4927_dma_count(unsigned int dmanr, unsigned int count) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].cntr = count; +} + +/* Set source/destination address increment size for a specific DMA channel. + */ +static void +set_tx4927_dma_inc(unsigned int dmanr, unsigned int sai, unsigned int dai) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].sair = sai; + dmaptr->ch[ch].dair = dai; +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + */ +static int +get_tx4927_dma_residue(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + return dmaptr->ch[ch].cntr; +} + +/* Get DMA status. + */ +static unsigned int +get_tx4927_dma_status(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + return dmaptr->ch[ch].csr; +} + +/* clear DMA status. + */ +static void +clear_tx4927_dma_status(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].csr = 0xffffffff; +} + +/* get DMA completion interrupt number. + */ +static int +get_tx4927_dma_irqno(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + + if (ch >= MAX_TXX9_DMA_CHANNELS) + return -1; + return txx9_irq_to_irq(tx4927_dmairqs[ch/4] + (ch % 4)); +} + +/* + * chain DMA operations. + * txx9_chdma_desc_t is nocache virtual address of the command descriptor. + */ + +static void +set_tx4927_dma_chain(unsigned int dmanr, txx9_chdma_desc_t cha) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + dmaptr->ch[ch].cha = CPHYSADDR((unsigned long)cha); +} + +static txx9_chdma_desc_t +get_tx4927_dma_chain(unsigned int dmanr) +{ + unsigned int ch = dmanr - TXX9_DMA_CHANNEL_START; + unsigned int cha; + struct tx4927_dma_reg *dmaptr = tx4927_dmaptrs[ch/4]; + ch %= 4; + cha = (unsigned int)dmaptr->ch[ch].cha; + if (cha == 0) + return 0; + return (txx9_chdma_desc_t)(UNCAC_BASE + cha); +} + +#define tx4927_chdma_desc(desc) ((struct tx4927_dma_ch_reg*)desc) + +static void +set_tx4927_chdma_mode(txx9_chdma_desc_t desc, unsigned int mode) +{ +#ifdef __LITTLE_ENDIAN + mode |= TX4927_DMA_CCR_LE; +#endif + tx4927_chdma_desc(desc)->ccr = mode; +} + +static void +set_tx4927_chdma_addr(txx9_chdma_desc_t desc, dma_addr_t sa, dma_addr_t da) +{ + tx4927_chdma_desc(desc)->sar = sa; + tx4927_chdma_desc(desc)->dar = da; +} + +static void +get_tx4927_chdma_addr(txx9_chdma_desc_t desc, dma_addr_t *sa, dma_addr_t *da) +{ + *sa = tx4927_chdma_desc(desc)->sar; + *da = tx4927_chdma_desc(desc)->dar; +} + +static void +set_tx4927_chdma_addr64(txx9_chdma_desc_t desc, dma64_addr_t sa, dma64_addr_t da) +{ + tx4927_chdma_desc(desc)->sar = sa; + tx4927_chdma_desc(desc)->dar = da; +} + +static void +get_tx4927_chdma_addr64(txx9_chdma_desc_t desc, dma64_addr_t *sa, dma64_addr_t *da) +{ + *sa = tx4927_chdma_desc(desc)->sar; + *da = tx4927_chdma_desc(desc)->dar; +} + +static void +set_tx4927_chdma_count(txx9_chdma_desc_t desc, unsigned int count) +{ + tx4927_chdma_desc(desc)->cntr = count; +} + +static void +get_tx4927_chdma_count(txx9_chdma_desc_t desc, unsigned int *count) +{ + *count = tx4927_chdma_desc(desc)->cntr; +} + +static void +set_tx4927_chdma_inc(txx9_chdma_desc_t desc, unsigned int sai, unsigned int dai) +{ + tx4927_chdma_desc(desc)->sair = sai; + tx4927_chdma_desc(desc)->dair = dai; +} + +static void +set_tx4927_chdma_chain(txx9_chdma_desc_t desc, txx9_chdma_desc_t cha) +{ + tx4927_chdma_desc(desc)->cha = CPHYSADDR((unsigned long)cha); +} + +static txx9_chdma_desc_t +get_tx4927_chdma_chain(txx9_chdma_desc_t desc) +{ + unsigned int cha = (unsigned int)tx4927_chdma_desc(desc)->cha; + if (cha == 0) + return 0; + return (txx9_chdma_desc_t)(UNCAC_BASE + cha); +} + +static txx9_chdma_desc_t +alloc_tx4927_chdma_cmd(void) +{ + int size = sizeof(struct tx4927_dma_ch_reg); + void *desc; + /* kmalloc always return 32-byte aligned address... */ +#if defined(ARCH_KMALLOC_MINALIGN) && ARCH_KMALLOC_MINALIGN < 32 +#error ARCH_KMALLOC_MINALIGN < 32 +#endif + desc = kmalloc(size, GFP_ATOMIC); + if (desc) { + if ((unsigned long)desc & 31) + panic("dma: kmalloc returns unaligned address."); + memset(desc, 0, size); + dma_cache_wback_inv((unsigned long)desc, size); + desc = (void *)UNCAC_ADDR((unsigned long)desc); + } + return (txx9_chdma_desc_t)desc; +} + +static void +free_tx4927_chdma_cmd(txx9_chdma_desc_t desc) +{ + if (desc) + kfree((void *)CAC_ADDR((unsigned long)desc)); +} + +static struct txx9_dma_ops tx4927_dma_ops = { + .init_dma = init_tx4927_dma, + .enable_dma = enable_tx4927_dma, + .disable_dma = disable_tx4927_dma, + .set_dma_mode = set_tx4927_dma_mode, + .set_dma_addr = set_tx4927_dma_addr, + .set_dma_addr64 = set_tx4927_dma_addr64, + .set_dma_count = set_tx4927_dma_count, + .set_dma_inc = set_tx4927_dma_inc, + .get_dma_residue = get_tx4927_dma_residue, + .get_dma_status = get_tx4927_dma_status, + .clear_dma_status = clear_tx4927_dma_status, + .get_dma_irqno = get_tx4927_dma_irqno, + .set_dma_chain = set_tx4927_dma_chain, + .get_dma_chain = get_tx4927_dma_chain, + .set_chdma_mode = set_tx4927_chdma_mode, + .set_chdma