BeagleBone eeProto Cape

From eLinux.org
Jump to: navigation, search

Descriptions

BeagleBone Proto Cape

The Logic Supply BeagleBone EEProto Cape provides an easy workspace for creating protoypes. Through-hole solderpoints are spaced at 2.54mm (0.1") pitch. It includes two 46 pin headers (soldering required) and provides convenient SOT23 SMD IC's breakouts. The GND, 3V, 5V, SYS5V and P8-P9 trace banks are all clearly marked on the PCB for easy identification. NOTE: On the EEproto cape the BUS labelled SYS5V is connected to the external DC jack, and VDD5V is connected to the internal 5V. Prototype quickly with surface-mount EEProm pre-installed. Includes write-protect jumper and dip-switch for easy addressing. Has support for up to four capes Using available pass-through header pins.The Proto Cape works with both the original BeagleBone and the BeagleBone Black.

Specifications

Electrical Specifications

Header 2x 46 pin
SOT23 dual 2x3 pads
EEprom 24LC256
Write Enable jumper
4 Addresses DIP switch selectable
Through-hole solderpoints 0.1" spaced


Mechanical Specifications

Size 2.15" x 3.40"
Layers 2
PCB Thickness .062"
RoHS Compliant Yes



EEPROM

BeagleBone Proto Cape Pin Usage
EEPROM Suport No
Board Name BeagleBone Proto Cape
Version R01
Manufacturer Logic Supply
Part Number CBB-EEProto
Pins Used 2



Documentations

Open Source Yes
System Reference Manual No
Schematics EAGLE, PDF
PCB Files EAGLE
Gerber Files Yes
Bills of Materials Yes



Vendors



Manufacturer's Link

For more information please visit LogicSupply


To go back to the cape list, please click BeagleBone Capes