- 1 BeagleBone Black Wireless Description
- 2 Frequently Asked Questions (FAQ)
- 4 Accessories
- 5 Board Revisions and Changes
- 6 Tips and Pointers
- 7 HDMI Issues
- 8 Known Issues
- 9 Software Resources
- 10 Hardware Files
- 11 BeagleBone Capes
- 12 Regulatory Compliance Documents
- 13 Export Information
- 14 RMA Support
- 15 Books
BeagleBone Black Wireless Description
Help needed here
Frequently Asked Questions (FAQ)
Help needed here
For a list of the confirmed working accessories please go to * Accessories Page
Covered there are cables, power supplies, displays,etc. Anything that can be added to the BeagleBone Black.
To install the JTAG header, all you have to do is install P2 on the back of the board.
P2 is a Samtec FTR-110-03-G-D-06 connector and can be purchased from Samtec or any of their distributors.
If you are using Code Composer Studio, you will need a Gel File
BeagleBoard.org is not the maker of the various capes. For information on cape compatibility and support go to BeagleBone Black Capes
List of capes is at BeagleBone Capes
Serial Debug Cable
For information on the serial debug cables go to Serial Debug Cables
Board Revisions and Changes
The only production version released so far is A5.
Tips and Pointers
Expansion Header Pin Usage
There are several precautions that need to me taken when working with the expansion headers to prevent damage to the board.
ALL VOLTAGE LEVELS ARE 3.3V MAX. APPLICATION OF 5V TO ANY I/O PIN WILL DAMAGE THE PROCESSOR AND VOID THE WARRANTY.
ANALOG IN VOLTAGES ARE 1.8V MAX. APPLICATION OF >1.8V TO ANY A/D PIN WILL DAMAGE THE PROCESSOR AND VOID THE WARRANTY.
1) Do not apply any voltages to any I/O pins when the board is not powered on.
2) Do not drive any external signals into the I/O pins until after the SYS_RESETn signal is HI (3.3V).
3) Do not apply any voltages that are generated from external sources until SYS_RESETn signal is HI.
4) If voltages are generated from the VDD_5V signal, those supplies must not become active until after the SYS_RESETn signal is HI.
5) If you are applying signals from other boards into the expansion headers, make sure you power the board up after you power up the BeagleBone Black or make the connections after power is applied on both boards.
In the System Reference Manual you will find reference to Boot Pins. These pins are connected to the expansion header.
If you load or terminate these pins to the point it affects their default setting, the board will not boot.
Powering the processor via its I/O pins can cause damage to the processor.
The expansion headers can be viewed on this Cape Expansion Headers.
Serial Header Usage
Power restrictions on the serial debug header are not an issue. On the board, there is a buffer that prevents damage from occurring by having the connector of the FTDI cable connected to the the header. It is safe to do and will not cause damage to the board when power is not applied to the board.
Extremely Useful Links
BeagleBoard home page
BeagleBoard How to Videos
Getting Started On BeagleBone Black
Adafruit Tutorials This site is well worth a visit. You may even decide to make it your home page!
Derek Molloy's Blog
GPIO and Device Tree (Derek Molloy)
C/C++ Introduction on BeagleBone (Derek Malloy)
Hackaday You can also subscribe to this. Should be checked often for the latest cool projects on BeagleBone Black
Interent Sharing On Windows 7
Robert P. J. Day's Wiki
Expanding the Storage Partition on microSD
If you have installed a Linux distribution on your microSD you can modify the root file system partition. You are then able to utilize all of the space on your microSD card regardless of the size of the default partition of your given image. Follow the instructions found on Expanding File System Partition on a MicroSD.
Note: The instructions on that page are general and are not guaranteed to work on every Linux distribution.
BoneScript is a Node.js library specifically optimized for the Beagle family, featuring familiar Arduino function calls, exported to the browser. The BoneScript library provides several functions useful for interacting with your hardware. The following BoneScript provides a dozen of hardware demos that interact with the BeagleBone Black.
Connecting to the BeagleBone Black: Serial Connection, SSH, or USB
In the following Terminal Shells page, there are instructions on how to connect to the BeagleBone Black through either a serial connection, SSH using an ethernet cable, or SSH to the BeagleBone's built-in IP address over a USB cable.
Creating a uSD card for Extra Storage
HDMI Issues..We have several people having issues getting the board to work with various TVs and Displays. RMA returns have shown no issues.
If you are having issues a separate support page has been set up at HDMI Issues
If you find any issues with any information on this WIKI, please send the information to the discussion forum https://beagleboard.org/discuss.
See https://github.com/RobertCNelson/omap-image-builder/issues (does this need to move to the beagleboard copy?)
Help needed here