IOTYS:IOTCape

From eLinux.org
Jump to: navigation, search

Descriptions

Iotcape.jpg

This Cape adds IOT connectivity to BeagleBone (White or Black) with 2G, 3G or 4G MiniPcie Modem to connect your local network to internet and BLE 4.1 BlueTooth connectivity to manage BLE devices or connect to Smartphone. It adds also two additional USB Host link to BeagleBone (Mass Storage, Wi-Fi, ZigBee, etc.)




Revision Changes

Revision A1

Initial release of BeagleBone IOTCape


Software Support

  • BeagleBone IOTCape revision A1 is supported by Debian on Linux 3.8.13.




Specifications

Electrical Specifications

Power 3.3V via BeagleBone header
5V via BeagleBone header
Indicators Modem LED
Switches One EEPROM switch
Connectors Two 46-position connectors
One MiniPcie connector for modem
Two USB Host connectors
BlueTooth TxPower Level 10 dBm


Mechanical Specifications

Size 3.74" x 2.20"
Layers 4
PCB Thickness .062"
RoHS Compliant Yes


Signal Usage

BeagleBone Pin usage

The BeagleBone IOTCape uses 14 signals including:

  • VDD_3V3EXP
  • SYS_5V
  • DGND
  • SYSRESETn
  • GPIO1_28
  • UART4_TXD
  • UART4_RXD
  • I2C2_SCL
  • I2C2_SDA
  • GPIO1_13
  • GPIO0_26
  • GPIO1_14
  • UART4_RTSN
  • UART4_CTSN


EEPROM

EEPROM Suport Yes
Board Name IOTCAPE
Version V1.0
Manufacturer IOTYS
Part Number BB-BONE-IOTCAPE
Pins Used 23



Documentations

Open Source Partly on proven request
System Reference Manual Yes
Schematics Partly on proven request
PCB Files No
Gerber Files No
Bills of Materials No




Vendors



Manufacturer's Link

For more information about this cape, please visit IOTYS


To go back to the cape list, please click BeagleBone Capes