Weston FAQ for RZ/G
Note: weston-ini is located /etc/xdg/weston/weston.ini
To edit the file weston.ini you can use the 'vi' editor that is in the BSP.
Remove toolbar and clock
[shell] clock-format=none panel-position=none
Single color setting of background
[shell] background-color=0xff000000 <- Black background-color=0xffff0000 <- Red background-color=0xff00ff00 <- Green background-color=0xff0000ff <- Blue
Top 8 bits are an alpha value. For example, 0x7fxxxxxx is translucent, but 0x00xxxxxx is not transparent and the wallpaper is displayed.
Remove Window Frame
To remove window frame on a Qt app, follow https://stackoverflow.com/questions/3948441/how-to-remove-the-window-border-containing-minimize-maximize-and-close-buttons
Changing the Video Mode for Weston
The display configuration is controlled by a file named 'weston.ini' located in the folder /etc/xdg/weston. Currently there is this section in it that sets some specific display timings.
In order to make a display work with the RZ/G2 board, the 'mode' settings need to be change to something that the display supports. In order to find those settings, run the 'cvt' command providing it the desired mode as parameters.
For example, on the RZ/G2E board, the maximum resolution is 1080p at 30Hz. Therefore you would use the command:
cvt 1920 1080 30
This should give you the proper display timings for running your display at 1080p 30fps and will force that specific mode.
You can also just specify a resolution (without timing).
[output] name=HDMI-A-1 mode=1280x720
After modifying the configuration and saving the file, restart the Weston desktop using this command:
systemctl restart weston
Another option is to set mode to "current" which keeps the current video resolution that the system was booted with.
[output] name=HDMI-A-1 mode=current
Then then set the resolution on the kernel command line in u-boot by changing the boot args to specify the resolution you want:
=> setenv bootargs 'root=/dev/mmcblk0p2 rootwait video=HDMI-A-1:1280x720-32 => saveenv