New pages
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)
- 07:31, 4 January 2021 Jetson nsight system (hist) [2,646 bytes] Mchi (talk | contribs) (Created page with "This page describes how to use Nsight System on Jetson L4T system =Nsight System Installation= ==Install NS on x86 Linux Host for Jetson Profile== <gallery> NS_Install1.PNG|S...")
- 14:58, 3 January 2021 C (hist) [4,462 bytes] Pigpio (talk | contribs) (Added my two generic C libraries for Linux)
- 18:53, 30 December 2020 Jetson/FAQ/BSP/Jetson TX2 NX ethernet LED indicators (hist) [4,042 bytes] XiaoLiu87 (talk | contribs) (Created page with "= Questions = == Jetson TX2 == Ethernet chip: BCM89610<br> When gigabit network cable is connected to ethernet port, the network indicators' behavior is wrong (the data indica...")
- 01:32, 25 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Chromium browser on R-Car Gen3 Starter Kit (hist) [232 bytes] Y.H. (talk | contribs) (Created page with "== How to use Chromium browser on R-Car Gen3 Starter Kit == Please refer to the R-Car/Chromium Category: R-Car/FAQ/Gen3 Category: R-Car/FAQ/Gen3/H3SK Category:...")
- 01:29, 25 December 2020 R-Car/Chromium/m86 (hist) [7,623 bytes] Y.H. (talk | contribs) (Created page with "{{Template:R-Car-Gen3-Navbox}} {{TOC right}} Category:R-Car Category:R-Car/Chromium == Introduction == This page contains information how to run chromium on R-Car Gen...")
- 21:10, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use x11 instead of wayland on R-Car Gen3 Starter Kit (hist) [819 bytes] Y.H. (talk | contribs) (Created page with "== How to use x11 instead of wayland on R-Car Gen3 Starter Kit == ex.) Yocto 3.21.0 : After step 9 of "R-Car/Boards/Yocto-Gen3/v3.21.0#Build_using_manual_steps", refer to...")
- 17:25, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get Android BSP for R-Car Starter Kit Pro(M3) and Kingfisher? (hist) [366 bytes] Y.H. (talk | contribs) (Created page with "== Where can I get Android BSP for R-Car Starter Kit Pro(M3) and Kingfisher? == Android P BSP for R-Car Starter Kit Pro(M3) and Kingfisher has not been released. <br/> It is...")
- 17:24, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to disable unnecessary packages with Kingfisher BSP (hist) [513 bytes] Y.H. (talk | contribs) (Created page with "== How to disable unnecessary packages with Kingfisher BSP == Kingfisher BSP can disable some package groups.<br/> Note) All packages are enabled in the default Kingfisher B...")
- 17:16, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build yocto image by using docker (hist) [2,544 bytes] Y.H. (talk | contribs) (Created page with "== How to build yocto image by using docker == === Setup Docker image === Dockerfile(ubuntu 1804) <syntaxhighlight lang=text> FROM ubuntu:18.04 ENV DEBIAN_FRONTEND noninterac...")
- 17:13, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Kernel boot is delay due to usb3.0 host firmware is missing when using upstream kernel on Kingfisher (hist) [1,221 bytes] Y.H. (talk | contribs) (Created page with "== Kernel boot is delay due to usb3.0 host firmware is missing when using upstream kernel on Kingfisher == kernel boot is delay about 60sec after the message "xhci-hcd ee0000...")
- 17:09, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Android BSP build process is stopped by syntax error of "build/make/tools/merge-event-log-tags.py" (hist) [1,330 bytes] Y.H. (talk | contribs) (Created page with "== Android BSP build process is stopped by syntax error of "build/make/tools/merge-event-log-tags.py" == It may be caused by Python3.<br/> Android P BSP supports python2 only...")
- 17:06, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to run Android BSP with R-Car Starter Kit only (hist) [336 bytes] Y.H. (talk | contribs) (Created page with "== How to run Android BSP with R-Car Starter Kit only == It is impossible because to flash android images requires CN13 on Kingfisher board.<br/> So, there is no support by R...")
- 17:05, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/The message "OS was not verified!" is shown in U-boot on Android BSP (hist) [750 bytes] Y.H. (talk | contribs) (Created page with "== The message "OS was not verified!" is shown in U-boot on Android BSP == If the error message which is at the bottom of this page is shown in U-boot,<br/> there are two way...")
- 17:03, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to use specific CPU core to run the specific application? (hist) [1,474 bytes] Y.H. (talk | contribs) (Created page with "== Is it possible to use specific CPU core to run the specific application? == There are several methods of realizing processor affiity under Linux.<br/> This FAQ descrives h...")
- 16:57, 24 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "NOTICE: BL2: Failed to DRAM initialize (-1)" is shown in IPL or kernel log stops the "Starting kernel ..." (hist) [1,816 bytes] Y.H. (talk | contribs) (Created page with "== The error message "NOTICE: BL2: Failed to DRAM initialize (-1)" is shown in IPL or kernel log stops the "Starting kernel ..." == Ex.) Error log: <syntaxhighlight lang=tex...")
- 12:06, 22 December 2020 RZ-G/RZG2 pcie ep (hist) [17,167 bytes] Prabhakarlad (talk | contribs) (Initial support)
- 20:24, 17 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change SELinux to permissive on Android BSP (hist) [483 bytes] Y.H. (talk | contribs) (Created page with "== How to change SELinux to permissive on Android BSP == <syntaxhighlight lan=text> # Turn on the device and interrupt autoboot using minicom. # Edit environment variable:...")
- 20:22, 17 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to build and operate without Renesas Proprietary MMP(+GFX) in the Android BSP for R-Car? (hist) [255 bytes] Y.H. (talk | contribs) (Created page with "== Is it possible to build and operate without Renesas Proprietary MMP (+GFX) in the Android BSP for R-Car? == The R-Car Android BSP provided by Renesas supports only cases i...")
- 20:21, 17 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the R-Car H3/M3 device documentation? (hist) [335 bytes] Y.H. (talk | contribs) (Created page with "== Where can I get the R-Car H3/M3 device documentation? == https://www.renesas.com/us/en/document/r-car-h3-m3-users-manual See also: * R-Car/Boards/H3SK#R-Car_H3_SoC_Docu...")
- 03:37, 11 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get Parameter Sheet of R-Car Gen3 Starter Kit. (hist) [250 bytes] Y.H. (talk | contribs) (Created page with "== How to get Parameter Sheet of R-Car Gen3 Starter Kit. == In order to get the Parameter Sheet, please contact distributor where you bought the board. Category: R-Car/FAQ...")
- 03:27, 11 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Can I use loopback of CAN on R-Car Starter Kit with Kingfisher? (hist) [223 bytes] Y.H. (talk | contribs) (Created page with "== Can I use loopback of CAN on R-Car Starter Kit with Kingfisher? == See R-Car/Boards/Kingfisher/Yocto-Gen3#CAN. Category: R-Car/FAQ/Gen3/Kingfisher Category: R-C...")
- 16:12, 9 December 2020 R-Car/Tests:timers (hist) [18,178 bytes] Neg (talk | contribs) (Created page with "This document describes how to test the CMT and TMU devices on Renesas R-Car Gen2 and Gen3 SoCs. There are other SoCs the R-Car Gen2 and Gen3 that have CMT and TMU devices b...")
- 23:14, 8 December 2020 Jetson/L4T BSP development tips (hist) [6,268 bytes] Jay chen (talk | contribs) (Created page with "== Preparation == First, please download BSP package from internet. It's preferred to download BSP package, instead of Jetpack. Go to https://developer.nvidia.com/embedded/li...")
- 10:40, 4 December 2020 RZ-G/RZG2 videos (hist) [1,288 bytes] Cbrandt (talk | contribs) (initial page)
- 22:01, 3 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to print verbose kernel logs to console on Android BSP (hist) [396 bytes] Y.H. (talk | contribs) (Created page with "== How to print verbose kernel logs to console on Android BSP == <syntaxhighlight lang=text> # Turn on the device and interrupt autoboot using minicom. # Edit environment va...")
- 22:00, 3 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/fastboot.sh script stacks with "waiting for any device" (hist) [806 bytes] Y.H. (talk | contribs) (Created page with "== fastboot.sh script stacks with "< waiting for any device >" == Host PC could not detect the board after rebooting to fastboot or fastbootd mode. <br> Please make sure that...")
- 21:56, 3 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "Failed to DRAM initialize (-1)" is shown on IPL(Initial Program Loader) of R-Car Starter Kit Premier (hist) [616 bytes] Y.H. (talk | contribs) (Created page with "== The error message "Failed to DRAM initialize (-1)" is shown on IPL(Initial Program Loader) of R-Car Starter Kit Premier == <syntaxhighlight lang=text> [ 0.540088] NOTICE...")
- 21:52, 3 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "tar (child): R-Car Gen3 Series Evaluation Software Package for Linux-*.tar.gz: Cannot open:" is shown in copy evaproprietary softwares.sh. (hist) [355 bytes] Y.H. (talk | contribs) (Created page with "== The error message "tar (child): R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz: Cannot open:" is shown in copy_evaproprietary_softwares.sh. == See the "R...")
- 21:50, 3 December 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use CFS(Completely Fair Scheduling) on R-Car Gen3 Starter Kit? (hist) [282 bytes] Y.H. (talk | contribs) (Created page with "== How to use CFS(Completely Fair Scheduling) on R-Car Gen3 Starter Kit? == If you want to use CFS, please enable only Big Core (CA57). See R-Car/Boards/Yocto-Gen3-CommonF...")
- 03:34, 27 November 2020 R-Car/Use-MMC-block-as-rootfs-on-v5-10 (hist) [4,471 bytes] Shimoda (talk | contribs) (Created page with "== Overview == Linux kernel v5.10-rc1 has the following commit which applied into R-Car SDHI driver. <pre> 7320915 mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existe...")
- 03:31, 27 November 2020 R-Car/Merging-MMC-block-requests (hist) [2,402 bytes] Shimoda (talk | contribs) (Created page with "== Overview == Linux kernel v5.4 supports mering MMC block requests by using IOMMU feature. If we enables the feature on R-Car Gen3, MMC read/write performance can be improve...")
- 18:37, 26 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to contact partner/company when the contact address/phone is not written in Solution Matching System (hist) [415 bytes] Y.H. (talk | contribs) (Created page with "== How to contact partner/company when the contact address/phone is not written in Solution Matching System. == We are discussing about adding those contact address/phone. </...")
- 18:35, 26 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get Mini monitor for Starter Kit (hist) [475 bytes] Y.H. (talk | contribs) (Created page with "== How to get Mini monitor for Starter Kit. == Mini monitor is flashed into Starter Kit before sale.</br> So, it is not provided.</br> But, there is "Flash Writer" which is u...")
- 18:34, 26 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use PVRTune with R-Car Gen3 Starter Kit (hist) [1,276 bytes] Y.H. (talk | contribs) (Created page with "How to use PVRTune with R-Car Gen3 Starter Kit. Ex.) HostPC is Linux 64-bit: # Download pvrtune. #* https://www.imgtec.com/developers/powervr-sdk-tools/installers/ # Install...")
- 18:28, 26 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use IPL on hyperflash instead of eMMC (hist) [429 bytes] Y.H. (talk | contribs) (Created page with "== How to use IPL on hyperflash instead of eMMC. == If you use IPL on hyperflash with Android BSP, run following commands before make command: <syntaxhighlight lang=text> exp...")
- 18:26, 26 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to crop the video which is captured by camera (hist) [505 bytes] Y.H. (talk | contribs) (Created page with "== How to crop the video which is captured by camera. == Ex) R-Car Starter Kit Premier + Kingfisher M06 and RDACM21 camera <syntaxhighlight lang=bash> gst-launch-1.0 v4l2src...")
- 08:54, 25 November 2020 EBC Exercise 33 gpio via Siri (hist) [952 bytes] Yoder (talk | contribs) (Initial info)
- 00:23, 20 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build kernel (u-boot, ATF etc) individually (hist) [519 bytes] Y.H. (talk | contribs) (Created page with "== How to build kernel (u-boot, ATF, etc.) individually == The following are examples. Kernel: <syntaxhighlight lang=text> $ bitbake linux-renesas </syntaxhighlight> u-boot...")
- 00:21, 20 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Which is the H3SK(RTP0RC77951SKBX010SA03) schematic? (hist) [585 bytes] Y.H. (talk | contribs) (Created page with "== Which is the H3SK(RTP0RC77951SKBX010SA03) schematic? == See the schematic below regardless of serial number. * https://www.renesas.com/us/en/doc/products/rcar/R-Car_H3_St...")
- 00:19, 20 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to write files to the read-only partitions on Android (hist) [514 bytes] Y.H. (talk | contribs) (Created page with "== How to write files to the read-only partitions on Android == Please refer to the following: <syntaxhighlight lang=text> $ adb root restarting adbd as root $ adb disable-ve...")
- 00:18, 20 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to limit total DDR memory size in Yocto (hist) [249 bytes] Y.H. (talk | contribs) (Created page with "== How to limit total DDR memory size in Yocto == Please add the following to bootargs:<br/> Ex) Case of 4GB memory size<br/> :<syntaxhighlight lang=text> mem=4096M </syntaxh...")
- 17:27, 18 November 2020 ECE434 Project Whack-A-Mole (hist) [4,266 bytes] Mcgeeca (talk | contribs) (Created page with "PT PT {{YoderHead}} Team members: Craig McGee Jr == Grading Template == I'm using the following template...")
- 07:08, 18 November 2020 ECE434blynkAlarmClock (hist) [3,809 bytes] Venmap (talk | contribs) (Created page with "PC PC {{YoderHead}} Team members: Venmap == Grading Template == I'm using the following template to grade....")
- 07:47, 17 November 2020 ECE434 Project Pet Monitor (hist) [10,733 bytes] Rogerscj37 (talk | contribs) (Created page with "PT PT {{YoderHead}} Team members: Mark A. Yoder == Grading Template == I'm using the following template to g...")
- 18:41, 16 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to flash separate image of Android. (hist) [675 bytes] Y.H. (talk | contribs) (Created page with "== How to flash separate image of Android == If you want to flash specific image only, you can flash it using fastboot command. <syntaxhighlight lang=text> adb reboot fastbo...")
- 19:01, 12 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Build process for Android crashes with strange error or segfault (mostly after 95%) (hist) [525 bytes] Y.H. (talk | contribs) (Created page with "== Build process for Android crashes with strange error or segfault (mostly after 95%) == It can be due to amount of RAM is not enough. <br/> Please make sure that RAM+SWAP i...")
- 18:59, 12 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/The message "waiting for device" is shown in terminal when using fastboot. (hist) [221 bytes] Y.H. (talk | contribs) (Created page with "== The message "waiting for device" is shown in terminal when using fastboot. == Please check whether USB cable is connected to CN13 on Kingfisher board. Category: R-Car/F...")
- 18:58, 12 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use H.264 encoding. (hist) [803 bytes] Y.H. (talk | contribs) (Created page with "== How to use H.264 encoding. == Ex) <syntaxhighlight lang=text> $ modprobe -a mmngr mmngrbuf vspm_if uvcs_drv $ gst-launch-1.0 -e videotestsrc ! video/x-raw, format=BGRA, w...")
- 18:57, 12 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the R-Car Starter Kit board documentation? (hist) [328 bytes] Y.H. (talk | contribs) (Created page with "== Where can I get the R-Car Starter Kit board documentation? == See followings: * R-Car/Boards/H3SK#Official_board_documentation * R-Car/Boards/M3SK#Official_board_doc...")
- 18:55, 12 November 2020 R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build without proprietary Multimedia and 3D Graphics software. (hist) [1,218 bytes] Y.H. (talk | contribs) (Created page with "== How to build without proprietary Multimedia and 3D Graphics software. == Please build Yocto image with `bitbake core-image-minimal` instead of `core-image-weston`. =====...")
