Wireless Car

From eLinux.org
Jump to: navigation, search

Team members:

  1. Srinath M.R
  2. Sanjeeva Raidu

Grading Template

I'm using the following template to grade. Each slot is 10 points. 0 = Missing, 5=OK, 10=Wow!

00 Executive Summary
00 Installation Instructions 
00 User Instructions
00 Highlights
00 Theory of Operation
00 Work Breakdown
00 Future Work
00 Conclusions
00 Demo
00 Not Late
Comments: I'm looking forward to seeing this.

Score:  00/100

(Inline Comment)

Executive Summary

Our main aim is to create a wireless car using motors and beagle bone and also Raspberry pi. The gpio pins are used to control the motor on the car to remote it. We will connect to our server to control directions using server-client method. Some additional interfaces, such as a IR sensor to control the moving direction of the car, an analog input to control the speed of the car and we will connect the pi/beagle bone to internet to control the car remotely ,control the motor speed ,are considered to be done based on the progress of the project.


Installation Instructions

User Instructions


Theory of Operation

Work Breakdown

Future Work


thumb‎ Embedded Linux Class by Mark A. Yoder