https://elinux.org/api.php?action=feedcontributions&user=LogicEthos&feedformat=atomeLinux.org - User contributions [en]2024-03-29T05:54:46ZUser contributionsMediaWiki 1.31.0https://elinux.org/index.php?title=RPi_Expansion_Boards&diff=142886RPi Expansion Boards2012-06-24T12:32:10Z<p>LogicEthos: Reorder alphabetically</p>
<hr />
<div>[[Category: RaspberryPi]]<br />
{{Template:RPi_Hardware}}<br />
<br />
<br />
==Introduction==<br />
On the Raspberry Pi, there are several connections which can be used for expansion:<br />
* The [[RPi Low-level peripherals|Rpi GPIO]] (General Purpose Input/Output) pins are exposed, that means that expansion boards are able to talk directly to the CPU.<br />
* The DSI connector will allow low-level interfacing with LCDs and other displays.<br />
* The CSI connector will allow camera modules to be added in future.<br />
<br />
==Current expansion boards==<br />
<br />
=== Arduino Shield and Raspberry Pi ===<br />
a little board with Arduino socket and Raspberry Pi socket<br />
you can power the boards with 12Volt or 5Volt<br />
http://www.progetti-hw-sw.it/raspberry.htm<br />
<br />
===Buffer Board===<br />
[http://www.thebox.myzen.co.uk/Raspberry/Buffer_Board.html Buffer Board] How to make a Pi Buffer on Veroboard. Each of the 14 outputs can drive up to 500mA using a Darlington array.<br />
<br />
=== Buzzberry Buzz-Board Interface ===<br />
[http://fortito.com Buzzberry] is an interface board enabling expansion using the Buzz-Board modular system designed primarily for educational use.<br />
<br />
===CJE/4D RTC===<br />
On 2nd January 2012, CJE/4D announced that they have a real-time clock (RTC) expansion board in the works: [http://www.raspberrypi.org/forum/features-and-requests/rtc]<br />
<br />
===GertBoard===<br />
::''main page: [[RPi Gertboard]]''<br />
This board is a buffer between your Rpi and the real world, use it to flash LEDs on and off, drive motors, run sensors and all that other fun stuff.<ref>http://www.raspberrypi.org/archives/411</ref><br />
<br />
=== GPIO isolated expansion/RTC ===<br />
[http://www.utelectronics.com UT Electronics] is developing a expansion board containing a fully isolated 16-I/O I2C GPIO expander and RTC, with extensive options for further expansion. C and Python libraries will be available at launch. The board will probably be sold as a kit, with SMT components already in place.<br />
<br />
=== aLaMode ===<br />
[http://wyolum.com/?p=824 “À la mode”] is an Arduino clone specifically designed to interface with the Raspberry Pi. You can of course connect a standard Arduino to a Pi USB port using a cord, but when you want a turnkey solution, how about an Arduino compatible “plate” (shield) that fits right on top of the Raspberry Pi with direct access to GPIO port? The Linux side handles all of the displays, human interfaces, and number crunching. The low power Arduino compatible “à la mode” board handles sensors, servos/motors, and provides a highly accurate real time clock.<br />
<br />
===Piface===<br />
[http://piface.openlx.org.uk Piface] is simpler than the [[RPi Gertboard]] (it's aimed at less experienced users), but also intended to connect to PCs and Android to be platform agnostic<br />
<br />
===Pi232 RS232 board===<br />
[http://www.logicethos.com/Blog/2012-06-21:_Pi232_Raspberry_Pi_RS232_boards Pi232] is an RS232 expansion board that plugs onto GPIO connector.<br />
<br />
=== PiDuino ===<br />
[http://www.youtube.com/watch?v=u5c1Dfaf57g Youtube video] showing prototype board<br />
<br />
=== Pi Plates ===<br />
[http://www.adafruit.com/blog/2012/03/14/adafruit-experimenting-with-pi-plates-for-raspberry_pi-shields-for-the-raspberry-pi/ Announcement]<br><br />
[http://www.adafruit.com/blog/2012/04/26/announcing-the-adafruit-prototyping-pi-plate-kit-for-raspberry-pi/ Prototyping plate announcement]<br />
<br />
===Pi-Wire===<br />
[http://go.je/18z Pi-Wire] Homelabs are developing options for connection of a 1-wire bus to the RaspberryPi. Boards include SPI breakout connections for future boards.<br />
<br />
=== Ponte ===<br />
[http://omer.me/2012/05/introducing-ponte/ PONTE initial post] An arduino shield bridge from Omer and SKPang<br />
<br />
=== Quick2Wire GPIO Expansion Board ===<br />
[http://quick2wire.com Quick2Wire GPIO board and experimenters kit] is an extension board for the Raspberry Pi that has level converters to allow the driving of TTL and real world devices such as LED's and switches. It will also provide an experimenters kit, a software framework and a number of tutorials.<br />
<br />
=== Raspberry Pi IO Interface ===<br />
[http://dangerousprototypes.com/forum/viewtopic.php?f=56&t=3996 forum thread] showing 'paper mockup'. Another buffered IO expander.<br />
<br />
=== Relay board and Raspberry Pi GPIO ===<br />
a board with 8 relays and 8 input with a Raspberry Pi socket<br />
you can power the boards with 12Volt, the board has a DIN rail container<br />
http://www.progetti-hw-sw.it/raspberry.htm<br />
<br />
=== RPi MIDI Breakout Board ===<br />
[http://zuzebox.wordpress.com/2012/03/18/midi-breakout-board-for-raspberry-pi-v0-10/ RPi MIDI Breakout Board] is a simple MIDI breakout board for the Raspberry Pi using the hardware UART from the RPi's expansion interface<br />
<br />
=== RPi Protoboard ===<br />
[http://zuzebox.wordpress.com/2012/03/05/raspberry-pi-prototype-pcb-v0-20/ RPi Protoboard] is a simple prototype board for the Raspberry Pi<br><br />
[http://www.designspark.com/knowledge/raspberry-pi-prototype-board-files another link] to the same project?<br />
<br />
=== RPi "UserPort" ===<br />
[http://zuzebox.wordpress.com/2012/03/14/userport-for-raspberry-pi-v0-10/ RPi UserPort] is a digital and analogue I/O board for the Raspberry Pi. UserPort replicates the original BBC Micros digital User Port and Analogue Port but uses more modern components such as the MCP23S17 16-ch GPIO and MCP3204 4-ch 12-bit ADC.<br />
<br />
===rpi_serial===<br />
BitWizard has a [http://www.bitwizard.nl/wiki/index.php/Raspberry_pi_expansion_system_page#expansion_boards Raspberrypi serial breakout board]. It breaks out four serial buses from the GPIO port.<br />
<br />
BitWizard then has a series SPI (or I2C) expansion boards that can be daisy-chained off the SPI (or I2C) buses of the expansion board. A virtually unlimited number of expansion boards can be connected. Expansion boards are available that drive a simple 16x2 text LCD, more general purpose IOs, servos, temperature sensors, relays, optocouplers etc. <br />
<br />
===RPi RS232 Breakout Board===<br />
[http://zuzebox.wordpress.com/2012/02/07/rs232-breakout-board-v0-20-for-raspberry-pi/ RPi RS232 Breakout Board] is a simple RS232 breakout board for the Raspberry Pi<br />
<br />
===Slice of Pi===<br />
[http://shop.ciseco.co.uk/slice-of-pi/ Slice of Pi] Ciseco have produced a convienient small break out board for the Raspberry PI. XBee style connector for XRF / XBee / RN-XV / XBT / RF-BEE etc. Has the SPI and I2C pins on one standard 8 way header and the Raspberry PI's 8 general purpose I/O pins on another for easy access. Comes as a kit of parts that needs to be soldered. Construction is very easy and suitable for children with basic soldering skills.<br />
<br />
=== XBee ZB SMT Backpack ===<br />
The [http://www.bootc.net/archives/2012/06/20/raspberry-pi-xbee-smt-backpack/ Raspberry Pi XBee ZB SMT Backpack] by [[User:bootc|bootc]] is a carrier board for [http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/zigbee-mesh-module/xbee-smt Digi XBee ZB SMT] modules. These are different to the normal XBee modules because they are surface mount and additionally can interface to a host using SPI as well as serial. The backpack also features 3 LEDs for status signals as well as two FTDI headers (one for the RPi and one for the XBee), as well as being able to host a 'normal' XBee module (though of course you can't use SPI with those).<br />
<br />
==References==<br />
<references/><br />
<br />
<br />
<br />
<br />
{{Template:Raspberry Pi}}</div>LogicEthoshttps://elinux.org/index.php?title=RPi_Expansion_Boards&diff=142880RPi Expansion Boards2012-06-24T12:24:17Z<p>LogicEthos: Added Pi232 expansion board</p>
<hr />
<div>[[Category: RaspberryPi]]<br />
{{Template:RPi_Hardware}}<br />
<br />
<br />
==Introduction==<br />
On the Raspberry Pi, there are several connections which can be used for expansion:<br />
* The [[RPi Low-level peripherals|Rpi GPIO]] (General Purpose Input/Output) pins are exposed, that means that expansion boards are able to talk directly to the CPU.<br />
* The DSI connector will allow low-level interfacing with LCDs and other displays.<br />
* The CSI connector will allow camera modules to be added in future.<br />
<br />
==Current expansion boards==<br />
===GertBoard===<br />
::''main page: [[RPi Gertboard]]''<br />
This board is a buffer between your Rpi and the real world, use it to flash LEDs on and off, drive motors, run sensors and all that other fun stuff.<ref>http://www.raspberrypi.org/archives/411</ref><br />
===rpi_serial===<br />
BitWizard has a [http://www.bitwizard.nl/wiki/index.php/Raspberry_pi_expansion_system_page#expansion_boards Raspberrypi serial breakout board]. It breaks out four serial buses from the GPIO port.<br />
<br />
BitWizard then has a series SPI (or I2C) expansion boards that can be daisy-chained off the SPI (or I2C) buses of the expansion board. A virtually unlimited number of expansion boards can be connected. Expansion boards are available that drive a simple 16x2 text LCD, more general purpose IOs, servos, temperature sensors, relays, optocouplers etc. <br />
<br />
===Piface===<br />
[http://piface.openlx.org.uk Piface] is simpler than the [[RPi Gertboard]] (it's aimed at less experienced users), but also intended to connect to PCs and Android to be platform agnostic<br />
<br />
===CJE/4D RTC===<br />
On 2nd January 2012, CJE/4D announced that they have a real-time clock (RTC) expansion board in the works: [http://www.raspberrypi.org/forum/features-and-requests/rtc]<br />
<br />
===Pi232 RS232 board===<br />
[http://www.logicethos.com/Blog/2012-06-21:_Pi232_Raspberry_Pi_RS232_boards Pi232] is an RS232 expansion board that plugs onto GPIO connector.<br />
<br />
===Pi-Wire===<br />
[http://go.je/18z Pi-Wire] Homelabs are developing options for connection of a 1-wire bus to the RaspberryPi. Boards include SPI breakout connections for future boards.<br />
<br />
===Slice of Pi===<br />
[http://shop.ciseco.co.uk/slice-of-pi/ Slice of Pi] Ciseco have produced a convienient small break out board for the Raspberry PI. XBee style connector for XRF / XBee / RN-XV / XBT / RF-BEE etc. Has the SPI and I2C pins on one standard 8 way header and the Raspberry PI's 8 general purpose I/O pins on another for easy access. Comes as a kit of parts that needs to be soldered. Construction is very easy and suitable for children with basic soldering skills.<br />
<br />
=== GPIO isolated expansion/RTC ===<br />
[http://www.utelectronics.com UT Electronics] is developing a expansion board containing a fully isolated 16-I/O I2C GPIO expander and RTC, with extensive options for further expansion. C and Python libraries will be available at launch. The board will probably be sold as a kit, with SMT components already in place.<br />
<br />
=== Buffer Board ===<br />
[http://www.thebox.myzen.co.uk/Raspberry/Buffer_Board.html Buffer Board] How to make a Pi Buffer on Veroboard. Each of the 14 outputs can drive up to 500mA using a Darlington array.<br />
<br />
=== PiDuino ===<br />
[http://www.youtube.com/watch?v=u5c1Dfaf57g Youtube video] showing prototype board<br />
<br />
=== Arduino Shield and Raspberry Pi ===<br />
a little board with Arduino socket and Raspberry Pi socket<br />
you can power the boards with 12Volt or 5Volt<br />
http://www.progetti-hw-sw.it/raspberry.htm<br />
<br />
=== Relay board and Raspberry Pi GPIO ===<br />
a board with 8 relays and 8 input with a Raspberry Pi socket<br />
you can power the boards with 12Volt, the board has a DIN rail container<br />
http://www.progetti-hw-sw.it/raspberry.htm<br />
<br />
=== Pi Plates ===<br />
[http://www.adafruit.com/blog/2012/03/14/adafruit-experimenting-with-pi-plates-for-raspberry_pi-shields-for-the-raspberry-pi/ Announcement]<br><br />
[http://www.adafruit.com/blog/2012/04/26/announcing-the-adafruit-prototyping-pi-plate-kit-for-raspberry-pi/ Prototyping plate announcement]<br />
<br />
=== RPi Protoboard ===<br />
[http://zuzebox.wordpress.com/2012/03/05/raspberry-pi-prototype-pcb-v0-20/ RPi Protoboard] is a simple prototype board for the Raspberry Pi<br><br />
[http://www.designspark.com/knowledge/raspberry-pi-prototype-board-files another link] to the same project?<br />
<br />
=== RPi "UserPort" ===<br />
[http://zuzebox.wordpress.com/2012/03/14/userport-for-raspberry-pi-v0-10/ RPi UserPort] is a digital and analogue I/O board for the Raspberry Pi. UserPort replicates the original BBC Micros digital User Port and Analogue Port but uses more modern components such as the MCP23S17 16-ch GPIO and MCP3204 4-ch 12-bit ADC.<br />
<br />
=== RPi MIDI Breakout Board ===<br />
[http://zuzebox.wordpress.com/2012/03/18/midi-breakout-board-for-raspberry-pi-v0-10/ RPi MIDI Breakout Board] is a simple MIDI breakout board for the Raspberry Pi using the hardware UART from the RPi's expansion interface<br />
<br />
=== RPi RS232 Breakout Board ===<br />
[http://zuzebox.wordpress.com/2012/02/07/rs232-breakout-board-v0-20-for-raspberry-pi/ RPi RS232 Breakout Board] is a simple RS232 breakout board for the Raspberry Pi<br />
<br />
=== Quick2Wire GPIO Expansion Board ===<br />
[http://quick2wire.com Quick2Wire GPIO board and experimenters kit] is an extension board for the Raspberry Pi that has level converters to allow the driving of TTL and real world devices such as LED's and switches. It will also provide an experimenters kit, a software framework and a number of tutorials.<br />
<br />
=== Raspberry Pi IO Interface ===<br />
[http://dangerousprototypes.com/forum/viewtopic.php?f=56&t=3996 forum thread] showing 'paper mockup'. Another buffered IO expander.<br />
<br />
=== Buzzberry Buzz-Board Interface ===<br />
[http://fortito.com Buzzberry] is an interface board enabling expansion using the Buzz-Board modular system designed primarily for educational use.<br />
<br />
=== Ponte ===<br />
[http://omer.me/2012/05/introducing-ponte/ PONTE initial post] An arduino shield bridge from Omer and SKPang<br />
<br />
=== aLaMode ===<br />
[http://wyolum.com/?p=824 “À la mode”] is an Arduino clone specifically designed to interface with the Raspberry Pi. You can of course connect a standard Arduino to a Pi USB port using a cord, but when you want a turnkey solution, how about an Arduino compatible “plate” (shield) that fits right on top of the Raspberry Pi with direct access to GPIO port? The Linux side handles all of the displays, human interfaces, and number crunching. The low power Arduino compatible “à la mode” board handles sensors, servos/motors, and provides a highly accurate real time clock.<br />
<br />
=== XBee ZB SMT Backpack ===<br />
The [http://www.bootc.net/archives/2012/06/20/raspberry-pi-xbee-smt-backpack/ Raspberry Pi XBee ZB SMT Backpack] by [[User:bootc|bootc]] is a carrier board for [http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/zigbee-mesh-module/xbee-smt Digi XBee ZB SMT] modules. These are different to the normal XBee modules because they are surface mount and additionally can interface to a host using SPI as well as serial. The backpack also features 3 LEDs for status signals as well as two FTDI headers (one for the RPi and one for the XBee), as well as being able to host a 'normal' XBee module (though of course you can't use SPI with those).<br />
<br />
==References==<br />
<references/><br />
<br />
<br />
<br />
<br />
{{Template:Raspberry Pi}}</div>LogicEthos