Android Board Support

Revision as of 14:15, 28 July 2010 by Tim Bird (talk | contribs) (add serial port info for Nexus One)
Jump to: navigation, search

Porting Android to a new platform can be a challenge. Here are some resources to start with that:

Processor Support


Most ports of Android are to ARM-based platforms.


  • Mentor Graphics and Texas Instruments support Android on OMAP processors via the project
  • See also Android on OMAP, which has a very thorough listing of issues faced in initially porting Android to OMAP


Mentor Graphics did a port of Android to MIPS.


(Unfortunately, this site requires registration.)


There is a whole well-developed project for Android on x86.


At least one major product (Sony Internet TV) is reported to be x86-based. Intel has a team of developers working on Android issues. See Mark Gross' presentation from ELC 2010 for some tips from them about using Android

Individual Platform Support

For Nexus One

Serial port access

There are some serial port pins available on the micro-USB connector, which you can access if you have the right hardware.

See this discussion on xda-developers for detailed information and links.

Brian Swetland says: TTL level (~3.3v?) serial is present on the D+/D- pins of the micro USB connector whenever VBUS (usb +5v power) is not present. This is physical UART1 (ttyMSM0). In standard builds the FIQ kernel debugger runs there. You'll have to disable the FIQ debugger and enable the serial device in your kernel config if you want to use it as a regular serial port.