Automatic Door Lock System

From eLinux.org
Revision as of 05:40, 26 November 2015 by SrinathMupparsi (talk | contribs) (Hardware)
Jump to: navigation, search

Team members:

  1. Anand K. Parmar
  2. Mani K. Srivastava
  3. M.R.Srinath
  4. Shiva Verma


Grading Template

I'm using the following template to grade. Each slot is 10 points. 0 = Missing, 5=OK, 10=Wow!

00 Executive Summary
00 Installation Instructions 
00 User Instructions
00 Highlights
00 Theory of Operation
00 Work Breakdown
00 Future Work
00 Conclusions
00 Demo
00 Not Late
Comments: I'm looking forward to seeing this.

Score:  00/100

(Inline Comment)

[page]

Executive Summary

The goal of this project is to build a Door Lock System such that the knock pattern acts as a key to it i.e. The system will get activated and door will be opened only until a specific pattern is detected by the system. The knock pattern is alterable, means user can set it according to their wish.


Hardware

Electrical Components

They are many components used in our project but the key role was of servo motor (HK15178).

The other main component was the piezo sensor which is used as the knock detector in our project.

Rest of the components which we have also used

  • PCB board [3]
  • Wires
  • Arduino [4]
  • 2 Led's (green & Red)
  • Momentary Push Button
  • Permanent Push Button
  • 4 resistors

Hardware Components

we have used only some of the hardware components like

  • Cardboard's
  • Polystyrene
  • Double sided tape

Installation Instructions

User Instructions

Highlights

Theory of Operation

Work Breakdown

Future Work

Conclusions



thumb‎ Embedded Linux Class by Mark A. Yoder