- 1 PocketBeagle Covert Mathematical Solver
- 2 Status
- 3 Proposal
- 3.1 About me
- 3.2 About my project
- 3.2.1 Description
- 3.2.2 Implementation Details
- 3.2.3 Timeline
- 3.2.4 Experience and approach
- 3.2.5 Contingency
- 3.2.6 Benefit
- 3.3 Misc
Implementing a covert UI and Stepwise mathematical solver on the PocketBeagle in order to act as a compact utility device.
Student: Patrick Grave
Mentors: Pac23 (Contacted him and discussed)
GSoC: GSoC entry
This project is currently just a proposal.
School: The University of Melbourne
Primary language: English
Typical work hours': '9AM - 5PM GMT+11
Previous GSoC participation: Tell us why you want to participate in GSoC here. I have not participated in GSoC previously but I did partake in 'Google Code In' with Zulip.
About my project
Project name: PocketBeagle Covert Mathematical Solver
The project involves implementing a Stepwise mathematical solver on the PocketBeagle in order to act as a covert calculator modification. The key value of the project is twofold:
1. Implementing a mathematical solver on the PocketBeagle. This makes inroads into more symbolic algebra and perhaps SAT-related computation on the small board.
2. Working within covert constraints (e.g. an unassuming UI without compromising UX). This may aid future efforts in other similar ventures (such as networking on such a device) or even security-related fields (an unassuming device for war walking).
Goals beyond the suggested ideas:
3. Add high-level scripting functionality (e.g. in lua or something similar). This would allow users with little low-level experience to increase the device's functionality. For example, a user could implement a solver for geometric problems which cannot be written symbolically.
4. Extend the device's UI capability. This has a great software value as it lends this device far more utility. This interface could allow web-browsing capability (but such an extension is likely out of the scope of this proposal) or pentesting/security modules as a pocket-calculator is a relatively unassuming device to carry around.
Preliminary UI Design Ideas attached below...
For initial development, a PocketBeagle+GamePup and USB wireless keyboard. The correct components for an identical form-factor to specific calculators can be realised later.
Regarding calculator choice:
As per my own teardown and on on Youtube (at https://www.youtube.com/watch?v=n8Y8gPi6QfE due to my poor photo quality), it is not feasible to cannibalise the existing board for the project. This is because there is no easy way to access the keyboard or interface with the PCB at all.
This is true of other mass market calculators (as per similar teardowns):
As such, it seems to me that the only way of adding functionality to the calculator is completely reimplementing its functionality on the Pocket Beagle. This shouldn’t be too hard due to its sufficient processing power and ability to handle math. However, considering time constraints, I hope to use a mass-market calculator with a smaller featureset (e.g. TI-30XB) which should be easier to implement. (Other calculators have multiple modes and table capabilities).
The timeline has been adjusted to accommodate this reimplementation.
A maximum of 16 GPIO pins for a multiplexed keyboard (allowing for a max of 61 buttons).
The calculator will use a gray TN LCD and requires a minimum screen resolution in order to imitate the original calculators.
For the TI 30XB, this is around 60 x 130 from some basic measurements. Presumably, this is actually a 64 x 128 screen.
LCD Modules are easy to source. This example seems suitable (requiring 28 pins): https://www.digikey.com/products/en?mpart=64128K%20FC%20BW-3&v=1756
These pins total within the GPIO capabilities of the board. If extra pins are required, the keyboard can easily be abstracted away with a small circuit to convert it to binary.
The approach would be implementing a tree-based math expression parser and step-by-step solver.
Relevant details and papers exist:
Implementations (on other platforms) exist as a reference:
Preliminary UI Design Ideas
(These are a Work In Progress that I am continuing to update on the elinux site).
The resolution on these mock-ups is too low and will be better in practice.
See images and captions on right...
On board scripting language
I aim to integrate an existing scripting framework into the design. The requirements of such a language are that it be lightweight, user-friendly and well-documented.
The two candidates are:
eLua which is well-documented and has considered supporting the Beaglebone Black previously (https://github.com/elua/elua)
Provide a development timeline with a milestone each of the 11 weeks and any pre-work. (A realistic timeline is critical to our selection process.)
|Mar 30||Proposal complete, Submitted to https://summerofcode.withgoogle.com|
|Apr 27||Proposal accepted or rejected|
|May 18||Pre-work complete, Coding officially begins!|
|May 25||Milestone #1, Introductory YouTube video|
|June 1||Milestone #2, Setup calculator environment. This includes interfacing with the screen and capacitive keyboard (as well as physically fitting in the case). Configuring I/O ports. Start work on reimplementation of featureset.|
|June 8||Milestone #3, Finish mimicking the original device’s feature-set on PocketBeagle hardware. Start the UI and control systems that hide the secret features of the device while allowing easy interaction.|
|June 15 18:00 UTC||Milestone #4, Mentors and students can begin submitting Phase 1 evaluations|
|June 19 18:00 UTC||Phase 1 Evaluation deadline|
|June 22||Milestone #5 Finish implementing the basic tree-based expression system. Over the preceding few weeks, I will implement an expression parser and tree formatter to handle basic algebraic expressions.|
|June 29||Milestone #6 By this point, step-by-step output will be fully functional for these basic algebra operations. The week will be spent turning these trees into steps and cleaning up code to optimise usability.|
|July 6||Milestone #7 The featureset will be extended to include basic Calculus (integration/derivation) and matrix-related operations.|
|July 13 18:00 UTC||Milestone #8, The board file system will be completed. This will be simple and segmented, allowing only storage of user files (rather than access to the underlying OS).|
|July 17 18:00 UTC||Phase 2 Evaluation deadline|
|July 20||Milestone #9 The scripting language will be implemented, sample programs will be written to demonstrate its functionality, and the permitted featureset of the chosen language will be documented.|
|July 27||Milestone #10 Conclude by tidying up any documentation and expanding the UI so it is accessible and adaptable to new features. This would include a sort of ‘app viewer’ as referenced in the above screenshots.|
|August 3||Milestone #11, Completion YouTube video|
|August 10 - 17 18:00 UTC||Final week: Students submit their final work product and their final mentor evaluation|
|August 17 - 24 18:00 UTC||Mentors submit final student evaluations|
Experience and approach
What will you do if you get stuck on your project and your mentor isn’t around?
I think, particularly for a project such as this, there are three alternate avenues to overcome obstacles: Firstly, the internet provides a great wealth of guides, videos and tools that should be able to aid me, no matter the problem. It is highly likely someone will have encountered my problem before and I should be able to learn from their experience. Secondly, I am not afraid to turn to a reference manual or datasheet in order to get things done. Although often dense and challenging, given the time, I am sure I can find the answers I need. Thirdly, if all else fails, there is always the option of applying strategies to diagnose the problem and tinkering to resolve it. Although this may take longer, it will ultimately give me a greater understanding of the project and help with future dilemmas.
If successfully completed, what will its impact be on the BeagleBoard.org community?
From this proposal, the BeagleBoard community will receive a platform for covert and compact systems. Such a system has value both for security and for compact integrated applications. A valuable component of this system is its UI which will hopefully provide inspiration to potential creators and guide them in creating compact, covert interfaces.
Further, this calculator project is likely to bring more people into the BeagleBoard community as it has utility, is an entertaining concept and is made from easily accessible components.
(Quotes from community members coming soon)
Here is a link to my Pull Request, demonstrating my cross-compilation: https://github.com/jadonk/gsoc-application/pull/144