Jump to: navigation, search

In the push to get mainline kernel support for the BeagleBoard, this is just a set of patches felt to be necessary to be cleaned-up and accepted before we can declare success that mainline Linux actually supports the BeagleBoard. The Angstrom kernel is being used as the set of minimal patches as a starting point for this list.

  • Sakoman patches
    • In Tony's tree (staged for 3.0)
      • OMAP: DSS2: DSI: fix use_sys_clk & highfreq
      • OMAP: DSS2: DSI: fix dsi_dump_clocks()
      • OMAP2PLUS: DSS2: Fix: Return correct lcd clock source for OMAP2/3
      • OMAP: DSS: DSI: Fix DSI PLL power bug
      • OMAP: DSS2: fix panel Kconfig dependencies
    • Unknown
      • OMAP: DSS2: add bootarg for selecting svideo or composite for tv output
      • video: add timings for hd720
      • drivers: net: smsc911x: return ENODEV if device is not found
      • drivers: input: touchscreen: ads7846: return ENODEV if device is not found
      • Revert "omap2_mcspi: Flush posted writes"
      • Revert "omap_hsmmc: improve interrupt synchronisation"
      • Don't turn SDIO cards off to save power. Doing so will lose all internal state in the card.
      • Enable the use of SDIO card interrupts.
      • soc: codecs: Enable audio capture by default for twl4030
      • soc: codecs: twl4030: Turn on mic bias by default
      • RTC: add support for backup battery recharge
      • ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
      • Add power-off support for the TWL4030 companion
      • ARM: OMAP: Add twl4030 madc support to Overo
      • Enabling Hwmon driver for twl4030-madc
      • mfd: twl-core: enable madc clock
      • rtc-twl: Switch to using threaded irq
      • ARM: OMAP: automatically set musb mode in platform data based on CONFIG options
      • omap: mmc: Adjust dto to eliminate timeout errors
      • omap: Fix mtd subpage read alignment
      • mtd: nand: omap2: Force all buffer reads to u32 alignment