Difference between revisions of "BeagleBoardDebian"
m (→eMMC: BeagleBone Black: BBB-eMMC-flasher-debian-7.2-2013-11-15.img.xz) |
m (2014-02-16 images) |
||
(15 intermediate revisions by 2 users not shown) | |||
Line 13: | Line 13: | ||
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs]) | ||
** Kernel Tree's | ** Kernel Tree's | ||
− | *** [https://github.com/RobertCNelson/ | + | *** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.13.x kernel branch] |
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | *** [https://github.com/RobertCNelson/linux-dev Development Kernel source code] | ||
Line 41: | Line 41: | ||
BeagleBone (video via cape) --dtb am335x-bone-video | BeagleBone (video via cape) --dtb am335x-bone-video | ||
BeagleBone Black --dtb am335x-boneblack | BeagleBone Black --dtb am335x-boneblack | ||
− | PandaBoard --dtb omap4-panda | + | PandaBoard (A1->A3) --dtb omap4-panda |
+ | PandaBoard (A4->Ax) --dtb omap4-panda-a4 | ||
PandaBoard ES --dtb omap4-panda-es | PandaBoard ES --dtb omap4-panda-es | ||
Line 54: | Line 55: | ||
So For the BeagleBoard xM: | So For the BeagleBoard xM: | ||
− | sudo ./mk_mmc.sh --mmc /dev/sdX --dtb | + | sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf |
*Options: | *Options: | ||
**--firmware : installs firmware | **--firmware : installs firmware | ||
**--serial-mode : debian-installer uses Serial Port | **--serial-mode : debian-installer uses Serial Port | ||
+ | |||
= Demo Image = | = Demo Image = | ||
− | == Debian | + | == Debian Stable (wheezy) == |
− | Default username/password: | + | Default username/password: |
*username: debian | *username: debian | ||
*password: temppwd | *password: temppwd | ||
Line 73: | Line 75: | ||
Image Updated: | Image Updated: | ||
− | *2013- | + | *2014-02-16 |
− | ** Beagle xM (ONLY): v3.12. | + | ** Beagle/Beagle xM: v3.13.3-armv7-x10 kernel |
− | ** BeagleBone/BeagleBone Black: v3.8.13- | + | ** BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel |
− | + | *2014-01-24 | |
+ | ** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel | ||
+ | ** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel | ||
+ | *2013-12-17 | ||
+ | ** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm) | ||
+ | ** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel | ||
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel | ** Beagle/Panda/Panda ES: v3.7.10-x13 kernel | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Services Active: | Services Active: | ||
− | Note: Depending on your internal network these may work out the box | + | Note: Depending on your internal network these may work out of the box |
Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2 | Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2 | ||
− | SSH, Port 22: ssh | + | SSH, Port 22: ssh debian@arm (Bone: via usb) debian@192.168.7.2 |
Getty, Serial Port | Getty, Serial Port | ||
− | + | Default user: debian pass: temppwd | |
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7. | + | wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.4-console-armhf-2014-02-16.tar.xz |
− | Verify Image with: | + | Verify Image with: |
− | md5sum debian-7. | + | md5sum debian-7.4-console-armhf-2014-02-16.tar.xz |
− | + | bd3609c5c644d516ac399fca52aeb9a2 debian-7.4-console-armhf-2014-02-16.tar.xz | |
Unpack Image: | Unpack Image: | ||
− | tar | + | tar xf debian-7.4-console-armhf-2014-02-16.tar.xz |
− | cd debian-7. | + | cd debian-7.4-console-armhf-2014-02-16 |
Install Image: | Install Image: | ||
− | Quick install script for | + | Quick install script for [board] |
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board | sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board | ||
− | + | [board] options: | |
− | |||
− | |||
*BeagleBone/Black - bone | *BeagleBone/Black - bone | ||
− | So for the | + | So for the BeagleBone: |
− | sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot | + | sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone |
− | Quick install script for | + | Quick install script for [board] (using new --dtb option) |
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board | sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board | ||
− | + | board options: | |
− | *BeagleBoard xM | + | *BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle |
+ | *BeagleBoard xM - omap3-beagle-xm | ||
So for the BeagleBoard xM: | So for the BeagleBoard xM: | ||
− | sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb | + | sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm |
− | + | Advanced: Build Image: | |
− | |||
− | |||
− | == Debian | + | Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder: |
+ | |||
+ | git clone git://github.com/RobertCNelson/omap-image-builder.git | ||
+ | cd omap-image-builder | ||
+ | git checkout v2014.02 -b tmp | ||
+ | touch release | ||
+ | ./rcn-ee_image.sh | ||
+ | |||
+ | == Debian Testing (jessie) == | ||
Image Updated: | Image Updated: | ||
− | *2013- | + | *2014-02-16 |
− | ** Beagle xM (ONLY): v3.12. | + | ** Beagle/Beagle xM: v3.13.3-armv7-x10 kernel |
− | ** BeagleBone/BeagleBone Black: v3.8.13- | + | ** BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel |
− | + | *2014-01-24 | |
+ | ** Beagle/Beagle xM: v3.13.0-armv7-x9 kernel | ||
+ | ** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel | ||
+ | *2013-12-17 | ||
+ | ** Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm) | ||
+ | ** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel | ||
** Beagle/Panda/Panda ES: v3.7.10-x13 kernel | ** Beagle/Panda/Panda ES: v3.7.10-x13 kernel | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf- | + | wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-02-16.tar.xz |
− | Verify | + | Verify Image with: |
− | md5sum debian-jessie-console-armhf- | + | md5sum debian-jessie-console-armhf-2014-02-16.tar.xz |
− | + | 12550b29231c51e76475ec5f37000c5b debian-jessie-console-armhf-2014-02-16.tar.xz | |
Unpack image: | Unpack image: | ||
− | tar | + | tar xf debian-jessie-console-armhf-2014-02-16.tar.xz |
− | cd debian-jessie-console-armhf- | + | cd debian-jessie-console-armhf-2014-02-16 |
− | Then follow directions | + | Then follow the directions shown above with the other images... |
= Flasher = | = Flasher = | ||
Line 174: | Line 167: | ||
== eMMC: BeagleBone Black == | == eMMC: BeagleBone Black == | ||
− | This image can be written to a | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC. |
− | power (same procedure as the official CircuitCo images) | ||
− | + | Script for reference: (this is the script that writes to the eMMC) | |
− | https://github.com/RobertCNelson/ | + | https://github.com/RobertCNelson/boot-scripts/blob/master/tools/beaglebone-black-eMMC-flasher.sh |
− | BTW: we are only writing about | + | BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on. |
Notes: | Notes: | ||
− | * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. | + | * If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected. |
− | * If the 4 LED's blink a constant pattern, eMMC write failed | + | * If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again. |
** (error -84: which may mean you've reached the max number of erase/write cycles...) | ** (error -84: which may mean you've reached the max number of erase/write cycles...) | ||
+ | |||
+ | User: debian | ||
+ | pass: temppwd | ||
+ | |||
+ | root: root/root | ||
Image Updated: | Image Updated: | ||
− | * | + | *2014-02-16 |
− | ** BeagleBone Black: v3.8.13- | + | ** BeagleBone Black: v3.8.13-bone40 kernel |
− | * | + | *2014-01-24 |
− | + | ** BeagleBone Black: v3.8.13-bone37 kernel | |
− | ** BeagleBone Black: v3.8.13- | + | *2013-12-17 |
− | *2013- | + | ** BeagleBone Black: v3.8.13-bone32 kernel |
− | ** BeagleBone Black: v3.8.13- | ||
− | |||
− | |||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7. | + | wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | md5sum BBB-eMMC-flasher-debian-7. | + | md5sum BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz |
− | + | 75593faa4338380f6e2b94e82376dc95 BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz | |
Follow the "standard" update procedure. | Follow the "standard" update procedure. | ||
http://circuitco.com/support/index.php?title=Updating_The_Software | http://circuitco.com/support/index.php?title=Updating_The_Software | ||
− | = | + | Linux: |
+ | unxz BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz | ||
+ | sudo dd if=./BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img of=/dev/sdX | ||
− | = | + | = raw microSD img = |
− | == | + | == BeagleBoard xM == |
− | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian. | |
− | |||
− | + | User: debian | |
− | + | pass: temppwd | |
− | + | root: root/root | |
− | + | Auto partition resize: | |
− | + | cd /opt/scripts/tools | |
+ | git pull | ||
+ | ./grow_partition.sh | ||
+ | sudo reboot | ||
− | * | + | Image Updated: |
+ | *2014-02-16 | ||
+ | ** Beagle/Beagle xM: v3.13.3-armv7-x10 kernel | ||
− | + | Get prebuilt image: | |
− | + | wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-02-16-2gb.img.xz | |
− | |||
− | |||
− | |||
− | + | Verify Image with: | |
− | . | + | md5sum bbxm-debian-7.4-2014-02-16-2gb.img.xz |
+ | a118de7b1500489ecd4d7263dc06b037 bbxm-debian-7.4-2014-02-16-2gb.img.xz | ||
− | + | Linux: | |
− | ./ | + | unxz bbxm-debian-7.4-2014-02-16-2gb.img.xz |
+ | sudo dd if=./bbxm-debian-7.4-2014-02-16-2gb.img of=/dev/sdX | ||
− | + | == BeagleBone/BeagleBone Black == | |
− | |||
− | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian. | |
− | |||
− | |||
− | |||
− | + | User: debian | |
− | + | pass: temppwd | |
− | |||
− | |||
− | |||
− | + | root: root/root | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | Auto partition resize: | |
− | + | cd /opt/scripts/tools | |
− | + | git pull | |
− | + | ./grow_partition.sh | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ./ | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
sudo reboot | sudo reboot | ||
− | + | Image Updated: | |
+ | *2014-02-16 | ||
+ | ** BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel | ||
+ | *2014-01-24 | ||
+ | ** BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel | ||
+ | *2013-12-17 | ||
+ | ** BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel | ||
− | + | Get prebuilt image: | |
− | + | wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.4-2014-02-16-2gb.img.xz | |
− | |||
− | + | Verify Image with: | |
+ | md5sum bone-debian-7.4-2014-02-16-2gb.img.xz | ||
+ | de60cb007a51d74ebe27411d3da76edf bone-debian-7.4-2014-02-16-2gb.img.xz | ||
− | + | Linux: | |
− | ./ | + | unxz bone-debian-7.4-2014-02-16-2gb.img.xz |
+ | sudo dd if=./bone-debian-7.4-2014-02-16-2gb.img of=/dev/sdX | ||
− | = | + | = Debian Configuration = |
− | + | == Serial Ports == | |
− | |||
− | |||
− | + | To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add: | |
+ | T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102 | ||
− | + | To start a console on the USB ACM device, add the following to /etc/inittab, | |
− | + | GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102 | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | ==Install Latest Kernel Image== | |
− | + | Script: | |
− | + | cd /opt/scripts/tools | |
− | + | git pull | |
− | + | Stable: | |
− | + | ./update_kernel.sh | |
− | + | Testing: | |
− | + | ./update_kernel.sh --beta-kernel | |
− | |||
− | |||
− | + | Custom: (has to be on rcn-ee.net) | |
− | ./ | + | ./update_kernel.sh --kernel v3.8.13-bone37 |
− | + | Reboot with your new Kernel Image. | |
− | |||
− | + | == Xorg Drivers == | |
− | |||
− | + | Script: | |
− | + | cd /opt/scripts/tools/ | |
+ | git pull | ||
− | + | BeagleBoard/PandaBoard: | |
− | + | cd /opt/scripts/tools/graphics/ | |
+ | ./ti-omapdrm.sh | ||
− | + | BeagleBone/BeagleBone Black: | |
+ | cd /opt/scripts/tools/graphics/ | ||
+ | ./ti-tilcdc.sh | ||
− | + | = Building Kernel = | |
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages: | Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages: | ||
− | + | == Beagle/Beagle xM == | |
http://eewiki.net/display/linuxonarm/BeagleBoard | http://eewiki.net/display/linuxonarm/BeagleBoard | ||
− | + | == BeagleBone == | |
http://eewiki.net/display/linuxonarm/BeagleBone | http://eewiki.net/display/linuxonarm/BeagleBone | ||
− | + | == BeagleBone Black == | |
http://eewiki.net/display/linuxonarm/BeagleBone+Black | http://eewiki.net/display/linuxonarm/BeagleBone+Black | ||
− | + | == Panda/Panda ES == | |
http://eewiki.net/display/linuxonarm/PandaBoard | http://eewiki.net/display/linuxonarm/PandaBoard | ||
Revision as of 10:30, 17 February 2014
This page is about running a (ARM EABI) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABI) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.
Contents
Help
If you need any help:
- Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle irc on freenode, accessible also by web interface (logs)
- Kernel Tree's
- When asking for help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
- Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
Recommended Beagle Software
Mainline U-Boot:
- All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
- XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
- Directions: Upgrade X-loader and U-Boot
Debian NetInstall
Scripts:
git clone git://github.com/RobertCNelson/netinstall.git cd netinstall
Device Options:
BeagleBoard --dtb omap3-beagle BeagleBoard xM --dtb omap3-beagle-xm BeagleBone (serial) --dtb am335x-bone-serial BeagleBone (video via cape) --dtb am335x-bone-video BeagleBone Black --dtb am335x-boneblack PandaBoard (A1->A3) --dtb omap4-panda PandaBoard (A4->Ax) --dtb omap4-panda-a4 PandaBoard ES --dtb omap4-panda-es
You will need a 1GB SD card or greater.
Standard System : ~455MB + Desktop environment (GNOME) : ~2.9GB
Debian Wheezy
Quick Install script for "board"
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
So For the BeagleBoard xM:
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
- Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port
Demo Image
Debian Stable (wheezy)
Default username/password:
- username: debian
- password: temppwd
Default root user/password
- user: root
- password: root
Image Updated:
- 2014-02-16
- Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
- BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
- 2014-01-24
- Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
- BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
- 2013-12-17
- Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
- BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
- Beagle/Panda/Panda ES: v3.7.10-x13 kernel
Services Active:
Note: Depending on your internal network these may work out of the box Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2 SSH, Port 22: ssh debian@arm (Bone: via usb) debian@192.168.7.2 Getty, Serial Port
Default user: debian pass: temppwd
Get prebuilt image:
wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.4-console-armhf-2014-02-16.tar.xz
Verify Image with:
md5sum debian-7.4-console-armhf-2014-02-16.tar.xz bd3609c5c644d516ac399fca52aeb9a2 debian-7.4-console-armhf-2014-02-16.tar.xz
Unpack Image:
tar xf debian-7.4-console-armhf-2014-02-16.tar.xz cd debian-7.4-console-armhf-2014-02-16
Install Image:
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board
[board] options:
- BeagleBone/Black - bone
So for the BeagleBone:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot bone
Quick install script for [board] (using new --dtb option)
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
board options:
- BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
- BeagleBoard xM - omap3-beagle-xm
So for the BeagleBoard xM:
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Advanced: Build Image:
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
git clone git://github.com/RobertCNelson/omap-image-builder.git cd omap-image-builder git checkout v2014.02 -b tmp touch release ./rcn-ee_image.sh
Debian Testing (jessie)
Image Updated:
- 2014-02-16
- Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
- BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
- 2014-01-24
- Beagle/Beagle xM: v3.13.0-armv7-x9 kernel
- BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
- 2013-12-17
- Beagle xM (ONLY): v3.12.5-armv7-x10 kernel (--dtb dt-beagle-xm)
- BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
- Beagle/Panda/Panda ES: v3.7.10-x13 kernel
Get prebuilt image:
wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-02-16.tar.xz
Verify Image with:
md5sum debian-jessie-console-armhf-2014-02-16.tar.xz 12550b29231c51e76475ec5f37000c5b debian-jessie-console-armhf-2014-02-16.tar.xz
Unpack image:
tar xf debian-jessie-console-armhf-2014-02-16.tar.xz cd debian-jessie-console-armhf-2014-02-16
Then follow the directions shown above with the other images...
Flasher
eMMC: BeagleBone Black
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/beaglebone-black-eMMC-flasher.sh
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
- (error -84: which may mean you've reached the max number of erase/write cycles...)
User: debian pass: temppwd
root: root/root
Image Updated:
- 2014-02-16
- BeagleBone Black: v3.8.13-bone40 kernel
- 2014-01-24
- BeagleBone Black: v3.8.13-bone37 kernel
- 2013-12-17
- BeagleBone Black: v3.8.13-bone32 kernel
Get prebuilt image:
wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
Verify Image with:
md5sum BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz 75593faa4338380f6e2b94e82376dc95 BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz
Follow the "standard" update procedure.
http://circuitco.com/support/index.php?title=Updating_The_Software
Linux:
unxz BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img.xz sudo dd if=./BBB-eMMC-flasher-debian-7.4-2014-02-16-2gb.img of=/dev/sdX
raw microSD img
BeagleBoard xM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.
User: debian pass: temppwd
root: root/root
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2014-02-16
- Beagle/Beagle xM: v3.13.3-armv7-x10 kernel
Get prebuilt image:
wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-02-16-2gb.img.xz
Verify Image with:
md5sum bbxm-debian-7.4-2014-02-16-2gb.img.xz a118de7b1500489ecd4d7263dc06b037 bbxm-debian-7.4-2014-02-16-2gb.img.xz
Linux:
unxz bbxm-debian-7.4-2014-02-16-2gb.img.xz sudo dd if=./bbxm-debian-7.4-2014-02-16-2gb.img of=/dev/sdX
BeagleBone/BeagleBone Black
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page. First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian.
User: debian pass: temppwd
root: root/root
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2014-02-16
- BeagleBone/BeagleBone Black: v3.8.13-bone40 kernel
- 2014-01-24
- BeagleBone/BeagleBone Black: v3.8.13-bone37 kernel
- 2013-12-17
- BeagleBone/BeagleBone Black: v3.8.13-bone32 kernel
Get prebuilt image:
wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.4-2014-02-16-2gb.img.xz
Verify Image with:
md5sum bone-debian-7.4-2014-02-16-2gb.img.xz de60cb007a51d74ebe27411d3da76edf bone-debian-7.4-2014-02-16-2gb.img.xz
Linux:
unxz bone-debian-7.4-2014-02-16-2gb.img.xz sudo dd if=./bone-debian-7.4-2014-02-16-2gb.img of=/dev/sdX
Debian Configuration
Serial Ports
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
To start a console on the USB ACM device, add the following to /etc/inittab,
GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
Install Latest Kernel Image
Script:
cd /opt/scripts/tools git pull
Stable:
./update_kernel.sh
Testing:
./update_kernel.sh --beta-kernel
Custom: (has to be on rcn-ee.net)
./update_kernel.sh --kernel v3.8.13-bone37
Reboot with your new Kernel Image.
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
Building Kernel
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
Beagle/Beagle xM
http://eewiki.net/display/linuxonarm/BeagleBoard
BeagleBone
http://eewiki.net/display/linuxonarm/BeagleBone
BeagleBone Black
http://eewiki.net/display/linuxonarm/BeagleBone+Black
Panda/Panda ES
http://eewiki.net/display/linuxonarm/PandaBoard
Upgrading from Debian 5 to Debian 6
Upgrading from Debian 5 to Debian 6 report and tutorial.
Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
sudo apt-get update ; sudo apt-get upgrade sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade