Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (Debian 8: jessie)
m (2017-08-11)
Line 85: Line 85:
  
 
Image Updated:
 
Image Updated:
 +
*2017-08-11
 +
** BeagleBoard xM: v4.12.5-armv7-x3 kernel
 +
** All BeagleBone Varients: v4.4.80-ti-r116 kernel
 +
** OMAP5432 uEVM: v4.4.80-ti-r116 kernel
 +
** BeagleBoard-X15: v4.4.80-ti-r116 kernel
 
*2017-07-14
 
*2017-07-14
 
** BeagleBoard xM: v4.12.1-armv7-x2 kernel
 
** BeagleBoard xM: v4.12.1-armv7-x2 kernel
Line 100: Line 105:
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-07-14/elinux/debian-9.0-console-armhf-2017-07-14.tar.xz
+
  wget https://rcn-ee.com/rootfs/2017-08-11/elinux/debian-9.1-console-armhf-2017-08-11.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum debian-9.0-console-armhf-2017-07-14.tar.xz
+
  sha256sum debian-9.1-console-armhf-2017-08-11.tar.xz
  d6d5b4f304d810efeefb3aed7d8927f2f4cd35d9061f63a1fc8e7d71d04acf66 debian-9.0-console-armhf-2017-07-14.tar.xz
+
  e38ee9b0eb1234abcec5b04fe7a0779b3908f1d150edea913ee8fd193eb76ed9 debian-9.1-console-armhf-2017-08-11.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xf debian-9.0-console-armhf-2017-07-14.tar.xz
+
  tar xf debian-9.1-console-armhf-2017-08-11.tar.xz
  cd debian-9.0-console-armhf-2017-07-14
+
  cd debian-9.1-console-armhf-2017-08-11
  
 
If you don't know the location of your SD card:
 
If you don't know the location of your SD card:
Line 152: Line 157:
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2017.07 -b tmp
+
  git checkout v2017.08 -b tmp
  
 
Stable:
 
Stable:
  
 
  ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 
  ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf
 +
 +
Testing:
 +
 +
./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf
 +
 +
== Debian Testing (buster) ==
 +
 +
Image Updated:
 +
*2017-08-11
 +
** BeagleBoard xM: v4.12.5-armv7-x3 kernel
 +
** All BeagleBone Varients: v4.4.80-ti-r116 kernel
 +
** OMAP5432 uEVM: v4.4.80-ti-r116 kernel
 +
** BeagleBoard-X15: v4.4.80-ti-r116 kernel
 +
 +
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-08-11/elinux/debian-buster-console-armhf-2017-08-11.tar.xz
 +
 +
Verify Image with:
 +
sha256sum debian-buster-console-armhf-2017-08-11.tar.xz
 +
b42f76dac5e7deddc71764feaf1e5d16fa841c91791737e25c401dae7c486b8c  debian-buster-console-armhf-2017-08-11.tar.xz
 +
 +
Unpack image:
 +
tar xf debian-buster-console-armhf-2017-08-11.tar.xz
 +
cd debian-buster-console-armhf-2017-08-11
 +
 +
Then follow the directions shown above with the other images...
  
 
= Flasher =
 
= Flasher =
Line 177: Line 208:
  
 
Image Updated:
 
Image Updated:
 +
*2017-08-11
 +
** All BeagleBone Varients with eMMC: v4.4.80-ti-r116 kernel
 
*2017-07-14
 
*2017-07-14
 
** All BeagleBone Varients with eMMC: v4.4.68-ti-r111 kernel
 
** All BeagleBone Varients with eMMC: v4.4.68-ti-r111 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-07-14/flasher/BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-08-11/flasher/BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb*
+
  sha256sum BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb*
  1ce04f181a5f8db04c4e524af62eae31984dd71f70bdf1d2e594a4342ec3399d BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  55e588ea8af321da9fdf458790851a722d45834962c0e694534126100f0ed3f1 BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 191: Line 224:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat BBB-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== eMMC: BeagleBoard-X15 ==
 
== eMMC: BeagleBoard-X15 ==
Line 210: Line 243:
  
 
Image Updated:
 
Image Updated:
 +
*2017-08-11
 +
** BeagleBoard-X15: v4.4.80-ti-r116 kernel
 
*2017-07-14
 
*2017-07-14
 
** BeagleBoard-X15: v4.4.68-ti-r111 kernel
 
** BeagleBoard-X15: v4.4.68-ti-r111 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-07-14/flasher/bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-08-11/flasher/bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb*
+
  sha256sum bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb*
  f1238f676866842b5decbdff8b8cf09e4023a1f36d81f212e3fe9ef698c7e3e9 bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  dfb46b738e3d2fa4318479e09a71a1fc03d9176a485ec50ecab4e63007605975 bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 224: Line 259:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-eMMC-flasher-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX
  
 
= raw microSD img =
 
= raw microSD img =
Line 242: Line 277:
  
 
Image Updated:
 
Image Updated:
 +
*2017-08-11
 +
** BeagleBoard xM: v4.12.5-armv7-x3 kernel
 
*2017-07-14
 
*2017-07-14
 
** BeagleBoard xM: v4.12.1-armv7-x2 kernel
 
** BeagleBoard xM: v4.12.1-armv7-x2 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-08-11/microsd/bbxm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbxm-debian-9.0-console-armhf-2017-07-14-2gb*
+
  sha256sum bbxm-debian-9.1-console-armhf-2017-08-11-2gb*
  d867aedd18eb7716a165bb023bdeb56d5f7d81b592209b4819f3410b62399049 bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  e59a0a2953ec7e2f38d6e7a2d4cd2bfe715e19bb0f58e6d01cff0f46c0a59411 bbxm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 256: Line 293:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbxm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbxm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== All BeagleBone Varients ==
 
== All BeagleBone Varients ==
Line 272: Line 309:
  
 
Image Updated:
 
Image Updated:
 +
*2017-08-11
 +
** All BeagleBone Varients: v4.4.80-ti-r116 kernel
 
*2017-07-14
 
*2017-07-14
 
** All BeagleBone Varients: v4.4.68-ti-r111 kernel
 
** All BeagleBone Varients: v4.4.68-ti-r111 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-08-11/microsd/bone-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bone-debian-9.0-console-armhf-2017-07-14-2gb*
+
  sha256sum bone-debian-9.1-console-armhf-2017-08-11-2gb*
  5fb430ce843dd5d4acf2aa77b101ffdfde62dc949c93b21a45860a42c2339eae bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  d40161469a1e506cb3154119bc607ce97a8bf12c1458c51e74491be192849e1d bone-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 286: Line 325:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bone-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bone-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== OMAP5432 uEVM ==
 
== OMAP5432 uEVM ==
Line 302: Line 341:
  
 
Image Updated:
 
Image Updated:
 +
*2017-08-11
 +
** OMAP5432 uEVM: v4.4.80-ti-r116 kernel
 
*2017-07-14
 
*2017-07-14
 
** OMAP5432 uEVM: v4.4.68-ti-r111 kernel
 
** OMAP5432 uEVM: v4.4.68-ti-r111 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-07-14/microsd/omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-08-11/microsd/omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb*
+
  sha256sum omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb*
  d1f59760b40a74a9eb9d0387fa305563d1bee55385d97c0e6a618088a6355040 omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  0e97c900650db018f0832435dabfd9d98ee06504514ce10916a55f0ca93ab1fb omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 316: Line 357:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat omap5-uevm-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX
  
 
== BeagleBoard-X15 ==
 
== BeagleBoard-X15 ==
Line 332: Line 373:
  
 
Image Updated:
 
Image Updated:
 +
*2017-08-11
 +
** BeagleBoard-X15: v4.4.80-ti-r116 kernel
 
*2017-07-14
 
*2017-07-14
 
** BeagleBoard-X15: v4.4.68-ti-r111 kernel
 
** BeagleBoard-X15: v4.4.68-ti-r111 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.com/rootfs/2017-07-14/microsd/bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2017-08-11/microsd/bbx15-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  sha256sum bbx15-debian-9.0-console-armhf-2017-07-14-2gb*
+
  sha256sum bbx15-debian-9.1-console-armhf-2017-08-11-2gb*
  1c126c66aafd3cfd918aa9a1954afc2c69de7871234d0c17ed7e6e949dc85ab7 bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz
+
  84eb2e38fa9cba6cd012ebc67b7fe737be29d4feb7d645bff14493b52c58c02c bbx15-debian-9.1-console-armhf-2017-08-11-2gb.img.xz
  
 
Windows/Mac/Linux gui
 
Windows/Mac/Linux gui
Line 346: Line 389:
  
 
Linux: (dd)
 
Linux: (dd)
  xzcat bbx15-debian-9.0-console-armhf-2017-07-14-2gb.img.xz | sudo dd of=/dev/sdX
+
  xzcat bbx15-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX
  
 
= Debian Configuration =
 
= Debian Configuration =

Revision as of 09:45, 14 August 2017

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 9 (stretch)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.12.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.4.y -b tmp
./build_kernel.sh

Debian (stretch)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2017-08-11
    • BeagleBoard xM: v4.12.5-armv7-x3 kernel
    • All BeagleBone Varients: v4.4.80-ti-r116 kernel
    • OMAP5432 uEVM: v4.4.80-ti-r116 kernel
    • BeagleBoard-X15: v4.4.80-ti-r116 kernel
  • 2017-07-14
    • BeagleBoard xM: v4.12.1-armv7-x2 kernel
    • All BeagleBone Varients: v4.4.68-ti-r111 kernel
    • OMAP5432 uEVM: v4.4.68-ti-r111 kernel
    • BeagleBoard-X15: v4.4.68-ti-r111 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/elinux/debian-9.1-console-armhf-2017-08-11.tar.xz

Verify Image with:

sha256sum debian-9.1-console-armhf-2017-08-11.tar.xz
e38ee9b0eb1234abcec5b04fe7a0779b3908f1d150edea913ee8fd193eb76ed9  debian-9.1-console-armhf-2017-08-11.tar.xz

Unpack Image:

tar xf debian-9.1-console-armhf-2017-08-11.tar.xz
cd debian-9.1-console-armhf-2017-08-11

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.08 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Debian Testing (buster)

Image Updated:

  • 2017-08-11
    • BeagleBoard xM: v4.12.5-armv7-x3 kernel
    • All BeagleBone Varients: v4.4.80-ti-r116 kernel
    • OMAP5432 uEVM: v4.4.80-ti-r116 kernel
    • BeagleBoard-X15: v4.4.80-ti-r116 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/elinux/debian-buster-console-armhf-2017-08-11.tar.xz

Verify Image with:

sha256sum debian-buster-console-armhf-2017-08-11.tar.xz
b42f76dac5e7deddc71764feaf1e5d16fa841c91791737e25c401dae7c486b8c  debian-buster-console-armhf-2017-08-11.tar.xz

Unpack image:

tar xf debian-buster-console-armhf-2017-08-11.tar.xz
cd debian-buster-console-armhf-2017-08-11

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-08-11
    • All BeagleBone Varients with eMMC: v4.4.80-ti-r116 kernel
  • 2017-07-14
    • All BeagleBone Varients with eMMC: v4.4.68-ti-r111 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/flasher/BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb*
55e588ea8af321da9fdf458790851a722d45834962c0e694534126100f0ed3f1  BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2017-08-11
    • BeagleBoard-X15: v4.4.80-ti-r116 kernel
  • 2017-07-14
    • BeagleBoard-X15: v4.4.68-ti-r111 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/flasher/bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb*
dfb46b738e3d2fa4318479e09a71a1fc03d9176a485ec50ecab4e63007605975  bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-08-11
    • BeagleBoard xM: v4.12.5-armv7-x3 kernel
  • 2017-07-14
    • BeagleBoard xM: v4.12.1-armv7-x2 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/microsd/bbxm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-9.1-console-armhf-2017-08-11-2gb*
e59a0a2953ec7e2f38d6e7a2d4cd2bfe715e19bb0f58e6d01cff0f46c0a59411  bbxm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-08-11
    • All BeagleBone Varients: v4.4.80-ti-r116 kernel
  • 2017-07-14
    • All BeagleBone Varients: v4.4.68-ti-r111 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/microsd/bone-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Verify Image with:

sha256sum bone-debian-9.1-console-armhf-2017-08-11-2gb*
d40161469a1e506cb3154119bc607ce97a8bf12c1458c51e74491be192849e1d  bone-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-08-11
    • OMAP5432 uEVM: v4.4.80-ti-r116 kernel
  • 2017-07-14
    • OMAP5432 uEVM: v4.4.68-ti-r111 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/microsd/omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb*
0e97c900650db018f0832435dabfd9d98ee06504514ce10916a55f0ca93ab1fb  omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-08-11
    • BeagleBoard-X15: v4.4.80-ti-r116 kernel
  • 2017-07-14
    • BeagleBoard-X15: v4.4.68-ti-r111 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-08-11/microsd/bbx15-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-9.1-console-armhf-2017-08-11-2gb*
84eb2e38fa9cba6cd012ebc67b7fe737be29d4feb7d645bff14493b52c58c02c  bbx15-debian-9.1-console-armhf-2017-08-11-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-9.1-console-armhf-2017-08-11-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.4.y
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + Xenomai
--ti-xenomai-channel --lts-4_4

Mainline (4.4.x lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Mainline (4.9.x lts)

4.9.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_9
4.9.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_9

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29

Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.4 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02_es8.x.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02_es8.x.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade